• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.5
• /
• pp.700-706
• /
• 2012

The core technology of a starting device in the packaged power system is the pinion gear shifting device and to limit the initial starting voltage. Although the conventional products have been used the starting controller using mechanical contactor, these have a big problem such as the uncertainty for the start of starting motor after a pinion gear is completely shifted or the arc demage due to high current. In this study, in order to solve these problems, we designed and fabricated a new product to achieve the safety and reliability as follows: the pinion gear-shifting control circuits to eliminate the uncertainty of the start, the starting control system using semiconductor device to prevent the arc demage of contactor caused by high current, a start safety devices for soft starting of series motor. In addition, we obtained the electrical safety by separating the pinion gear control circuit and the source circuit of motor.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.210-214
• /
• 2004

This study proposes a design method for blade pitch control mechanism in order to regulate the power and to improve the starting characteristic. This power control unit which is assembled by spring and mass is planing to equip with 1kW class wind turbine system which is developed for low wind speed area like Korea. For the design of this control unit, the proper geometry of the hub was designed and the calculation of the mechanics was carried out. Especially, It is expected that the operational efficiency will be improved because of additional high pitch starting function by using 2 step spring structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.774-780
• /
• 2021

The auxiliary power unit (APU) of a rotorcraft starts the engine during operation/flying. The APU is composed of a gas turbine engine type. The starting principle of the component is that the electric start motor generates the power required for starting by rotating the shaft. In this study, quality improvement was performed by applying an over-running clutch (ORC) between the APU and the starter motor to secure the operability of the starter motor of the APU mounted on the rotorcraft. The starter motor has the main role of starting the APU, but during operation, it is rotated without load by the rotational force of the APU gear shaft, resulting in friction at the brush. This phenomenon causes abrasion of the brush of the starter motor. Consequently, when the APU operation time increases, the brush life decreases, and the operability of the APU is affected. In this study, an ORC that separates the interlocking between the start motor brush abrasion and the APU operation time was applied to improve the operability/durability of the APU starter motor. The effect was verified through a test, and the technical feasibility of the design change was analyzed.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.466-467
• /
• 2018

본 논문은 시동 발전기(Hybrid Starter Generator, HSG) 시스템을 이용한 탑재형 충전기(On Board Charger, OBC)의 설계 및 제어 방법을 제안한다. 일반적으로 하이브리드 자동차(Hybrid Electric Vehicle, HEV)는 인버터 및 발전기로 구성된 HSG 시스템과 전력변환장치를 이용한 배터리 충전 시스템을 포함한다. 본 논문에서는 HSG 시스템에 추가적인 회로를 이용하여 배터리 충전 기능을 수행할 수 있는 OBC의 설계 및 제어 방법을 제안한다. 결과적으로 전력변환장치의 수를 줄여 차량의 내부 공간을 확보하며, 제조 가격을 감소시킬 수 있다. 시뮬레이션을 통해 제안하는 배터리 충전 시스템의 설계 및 제어 방법의 타당성을 검증한다.

• Journal of the Korean Institute of Gas
• /
• v.15 no.3
• /
• pp.47-52
• /
• 2011

The purpose of this paper analyzes and studies to seek the failure examples of electronic control actuators for engine in liquified petroleum gas vehicle. The first, it was verified phenomenon for intial starting damage and no-acceleration of engine because of occasionally fuel feeding interception by clogged of emergency cutting solenoid valve filter. The second, the contact resistance produced in the connecting part of engine control relay because of no fully surface contacting by processes and assembly badness. It was displayed phenomenon of re-starting badness. The actuator that idle speed control system was sticked inside because of intake-air decreasing by carbon deposit. As a result, it was verified the phenomenon of disharmony that repeated up and down the engine revolution.

• Journal of the korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.17-20
• /
• 1979

Transistor식 점화장치는 자동차의 배기 공해대책, 연료저감대책 등의 방안으로 근래에 급속히 발전된 System이다. Transistor 점화장치로 요구되는 배경은 다음과 같다. [1] 화화출력이 커져서 Engine에 있어서 확실한 연소가 기대되고 배기정화책 연료저감책에 유 효하다. [2] 기계적인 접점이 없으므로 장기적으로 Engine의 성능을 일정하게 유지한다. [3] 저회전에서 고회전까지 높고 안정된 화화출력을 갖고 있기 때문에 시동특성 고속특성이 양 호하다. [4] 점화시기제어에 신기능부가가 용이 이와같은 목표를 달성하기 위하여 세계각국의 자동차 Maker는 각각의 독자적인 System 회로방식을 개발하여 Transistor점화장치를 실용화하고 있 으나 우리나라에서는 아직도 자동차에 기계식 점화장치를 사용하여 생산하고 있는 실정이다.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.144-148
• /
• 2023

Aircraft battery is the core equipment of an aircraft that supplies engine starting power and emergency power, and it must be charged to ensure sufficient capacity at all times and maintain high reliability to ensure stable power supply. The battery of the T-50 series aircraft is designed to enable the engine to start up to two times in temperatures as low as -18℃ and above. However, intermittent failures in engine starting have been observed during winter. In this paper, we analyze the failure phenomena occurring during low-temperature charging of the battery and improve the charging algorithm based on the analysis and test. Additionally, the results of start simulation tests show that the battery charging defects at low temperatures are resolved, and an improvement in the charging performance is confirmed; thus, validating the effectiveness of the new algorithm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1148-1160
• /
• 2001

An electronic control system of the automobile engine for optimal start and idle speed control has been developed. This system employs the microcoputer-based electronic control unit and crank angle sensor for precise control on fuel injection, ignition timing, and idle speed more quickly and accurately at the start and idling. Consequently, the number of misfire can be reduced during been affected by air flow rate, idle quality(roughness), spark timing, fuel injection, water temperature, and load, Thus, this electronic control system strivers to reach the optimal idle operating point, defined the lowest idle speed(fuel economy) and idle quality(roughness), under any engine operating conditions.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.6-8
• /
• 2003

합1성단락시험에서 차단기의 정확한 아크시간을 검증하기 위해서는 재점호 회로가 필요하게 된다. 재점호장치는 전류원회로의 전류영점 직전에 기울기가 매우 큰 전류를 주입하여 차단기가 시험전류를 차단할 수 없게 하여 차단기의 아크시간을 직접시험과 동일하게 유지시키는 장치로서 본 장치를 구동하는 핵심장치는 고속도로 고전압 및 대전류를 투입하는 스파크 갭 스위치이다. 현재까지 이러한 용도의 스파크 갭 스위치가 개발되어 사용되고 있지만 본 논문에서는 고속 투입스위치로 진공차단기의 인터럽터를 사용하고, 시동용 전원으로 직류 12V만을 사용하여 정확하고 신뢰성 있는 재점호 장치용 스파크 갭 스위치의 설계, 제작 및 시운전 결과 등에 관해 기술 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.700-707
• /
• 2018

Vehicles are used in daily life as convenient transport, it is important to authenticate driver because vehicles are controlled by driver. Especially, in these days, there is a discussion on introduction of Driving Under the Influence car-starting locking device installation for preventing accidents caused by Driving Under the Influence of alcohol, these car-starting locking device installation requires a lot of money and time. Suitable user authentication for solving user's inconvenience during the disabled and men of national merit to receive discount benefits is needed. In this paper, For solving these problems, we propose the efficient vehicle control and user authentication system for preventing driving under the influence and providing the disabled and men of national merit benefit based on driver authentication by using user's smartphone NFC communication and user's biometric information.