• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.13-17
• /
• 1996

다수의 신호를 동시에 사용하는 경우에 나타나는 광대역 신호나 센서의 수와 형성하고자 하는 빔의 수가 많은 경우를 다루기 위해서는 주파수 영역 기법이 필요하다. FFT를 사용하는 낮은 샘플링 주파수에서도 시간 영역에서의 보간 방법보다 빠르게 정확한 시간 지연을 줄 수 있어 코히어런트 신호처리가 가능하다. 또한 특정 센서가 불량인 경우 보정이 상대적으로 용이하다는 장점을 가진다. 여러 가지 주파수 영역 빔형성 기법 중 계산량과 저장 용량면으로 효율적인 방법은 CZT와 FIR interpolation 방법이다. 또한, 공액 빔을 형성할 경우에는 Goertzel의 알고리듬을 이용하는 방법도 효율적이다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.3
• /
• pp.87-94
• /
• 2007

A structural dynamic analysis can be divided into a time domain analysis and a frequency domain analysis. The time domain analysis makes use of a direct integration method or a mode superposition method and the frequency domain analysis applies a DFT method. Generally the DFT method is more effective method in case of calculating response of periodic excitation. But in case of transient excitation exact solution can not be acquired. So, by modifying the response or increasing the period accuracy of solution can be enhanced. Accordingly this study analyzed dynamic responses of structures under aperiodic moving load in time domain and frequence domain. Consequently it is concluded that exact solution would be get enough using DFT method by increasing the duration of free vibration or modifying the dynamic response.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.8
• /
• pp.589-597
• /
• 2002

In this paper the nonstationary response of accelerating vehicle is firstly obtained by using nonstationary road roughness model in time domain. To get the result of nonstationary response in frequency domain, the maximum entropy method is used for Processing nonstationary response of vehicle in frequency domain. The three-dimensional transient maximum entropy spectrum (MES) of response is given.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.107-110
• /
• 2004

본 논문에서는 시간-주파수 혼성 영역 피치 검출법을 제안하였다. 음성신호를 주파수 영역으로 변환하고 주파수 영역에서 위상 성분을 조절하여 시간영역으로 역변환 함으로써 피치 피크가 최대가 되도록 하여 용이한 피치검출이 가능하였다. 또한 처리시간을 단축하기 위하여 FFT와 IFFT의 비트 재정렬을 생략하여 처리할 수 있는 방법을 제안하였다. 성능 측정 결과 기존의 켑스트럼 검출법에 비하여 검출성능은 우수하면서도 처리시간은 $84.8\%$로 단축됨을 알 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.2
• /
• pp.191-200
• /
• 2013

In this paper, we propose a new estimation method of time offset, frequency offset, and signal to interference plus noise ratio (SINR) using the synchronization channel preamble to provide IEEE 802.16.1a based talk-around direct communications (TDC). The proposed scheme estimates the time offset and frequency offset both in the time domain and in the frequency domain considering the preamble structure. In addition, it improves the estimation accuracy by combining the estimated values in two domains taking into account TDC synchronization scenarios. Through numerical simulations in the TDC channel environments, the performance of the proposed algorithm is compared with those of existing techniques such as the time domain estimation and the frequency domain estimation.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.311-318
• /
• 2013

This paper deals with a noise reduction algorithm which uses the binary masking in the time-frequency domain. To improve speech intelligibility in noise, noise-masked speech is decomposed into time-frequency units and mask "0" is assigned to masker-dominant region removing time-frequency units where noise is dominant compared to speech. In the previous research, Gaussian mixture models were used to classify the speech-dominant region and noise-dominant region which correspond to mask "1" and mask "0", respectively. In each frequency band, data were collected and trained to build the Gaussian mixture models and detection procedure is performed to the test data where each time-frequency unit belongs to speech-dominant region or noise-dominant region. In this paper, we consider the correlation of masks in the frequency domain and propose a post-processing method which exploits the Viterbi algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.38-44
• /
• 2022

Speech enhancement is performed to improve intelligibility and quality of the noise-corrupted speech. In this paper, speech enhancement performance was compared using different loss functions in time and frequency domains. This study proposes a combination of loss functions to utilize advantage of each domain by considering both the details of spectrum and the speech waveform. In our study, Scale Invariant-Source to Noise Ratio (SI-SNR) is used for the time domain loss function, and Mean Squared Error (MSE) is used for the frequency domain, which is calculated over the complex-valued spectrum and magnitude spectrum. The phase loss is obtained using the sin function. Speech enhancement result is evaluated using Source-to-Distortion Ratio (SDR), Perceptual Evaluation of Speech Quality (PESQ), and Short-Time Objective Intelligibility (STOI). In order to confirm the result of speech enhancement, resulting spectrograms are also compared. The experimental results over the TIMIT database show the highest performance when using combination of SI-SNR and magnitude loss functions.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.70-72
• /
• 2020

본 논문에서는 동작 영역 감지 회로를 이용한 LLC 컨버터의 홀드-업 시간 연장 기법을 제안한다. LLC 컨버터는 주로 소프트 스위칭이 가능한 인덕티브 영역에서 동작하며, 커패시티브 영역에서의 동작을 방지하기 위해서 최대 전압 이득을 가지는 스위칭 주파수보다 충분히 높은 주파수까지만 동작시킨다. 그 결과, LLC 컨버터가 가지는 최대 전압 이득을 활용하지 못하기 때문에, 입력 전압 범위가 좁아져 홀드-업 시간이 줄어들게 된다. 본 논문에서는 LLC 컨버터의 동작 영역을 감지하여, 최대 전압 이득을 가지는 스위칭 주파수까지 동작시킴으로서 홀드-업 시간을 최대로 가지게 한다. 제안된 기법을 통해 홀드-업 시간이 증가하고, 링크 커패시터의 부피를 감소시킬 수 있다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1870-1871
• /
• 2011

본 논문에서는 전력케이블에서의 시간-주파수 영역 반사파 계측법을 기반으로 한 기준신호를 설계한다. 사용된 기준신호는 시간과 주파수 영역에서 동시에 분석할 수 있는 가우시안 포락선을 가지는 첩 신호이다. 10m 전력케이블의 특성에 적합하게 설계된 기준신호를 케이블에 직접 인가하여 반사파를 측정하고 정규화된 시간-주파수 영역 상호상관함수로 비교 분석하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.1
• /
• pp.110-116
• /
• 1999

In this paper, signal processing is utilized to reduce the computational time which is one of weak point of FDTD(finite difference time domain) method. Compared with the direct FDTD. combination of FDTD and signal processing achieves the same type of accuracy in much shorter time The combination method spends 140 minutes to analyze the frequence characteristics of the microstrip lowpass filter while the direct FDTD consumes about 900 minutes. To verify the obtained results, microstrip lowpass filter is fabricated on dielectric substrate and the measured results are compared with the analyzed results. It is shown that measured results are in good agreement with the theoretical results.