• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.596-610
• /
• 2007

In order to reduce the complexity of SVC encoding, we introduce a fast mode decision method in the enhancement layers of spatial scalability by selectively performing the inter-layer residual prediction of SVC. The Inter-layer residual prediction coding in Scalable Video Coding has a large advantage of enhancing the coding efficiency since it utilizes the correlation between two residuals from a lower spatial layer and its next higher spatial layer. However, this entails the dramatical increase in the complexity of SVC encoders. The proposed method is to analyze the characteristics of integer transform coefficients for the subtracted signal for two residuals from lower and upper spatial layers. Then it selectively performs the inter-layer residual prediction coding and rate-distortion optimizations in the upper spatial enhancement layer if the SAD values of residuals exceed adaptive threshold values. Therefore, by classifying the residuals according to the properties of integer-transform coefficients only with SAD of residuals between two layers, the SVC encoder can perform the inter-layer residual coding selectively, thus significantly reducing the total required encoding time. The proposed method results in reduction of the total encoding time with 51.5% in average while maintaining the RD performance with negligible amounts of quality degradation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.47-56
• /
• 2015

Under the conditions of invested actual changes of heeling angles during MV Sewol's sinking, this study proposes passengers' evacuation scenarios, which are based on the assumption of normal orders of evacuation being given to the passengers, and evaluates using a marine-specialized human evacuation simulation tool. As results, when the heeling angle is set as 0 degree or 30 degree, it is found out that almost every passengers can success to evacuate to the musterstations, even though the evacuation times are different depending on the scenarios and the walking speeds. Meanwhile, when the heeling angle is varied as the Sewol incident, 3.1 %(Scenario Sc-Va which set chutes on port side as evacuation routes), 11.1 %(Sc-Vb, every open decks of port side as evacuation routes) and 20.0 %(Sc-Vc, every open decks of port and AFT sides as evacuation routes) among 476 passengers can successfully reach to the musterstations from their cabins with the condition of average walking speed as 2.04 m/s on flat. And only 0.8 %(Sc-Va), 3.8 %(Sc-Vb) and 10.7 %(Sc-Vc) can success to evacuate with the condition of average walking speed as 1.48 m/s on flat.

• Journal of Korean Society of Transportation
• /
• v.31 no.4
• /
• pp.47-57
• /
• 2013

This study aims at analyzing transportation equity between geographical areas of Gyonggi Province, by taking both the transportation infrastructure and travel behavior into account. Indicators of transportation infrastructure include the indices of road infrastructure, transit infrastructure and regional characteristics. Travel behavior concerns information from bus card data on a survey day. The hot-spot analysis conducted included spatial cluster analysis and global/local regression analyses. The analysis results identified geographical areas of four different classes of transportation equity, from the area with high level infrastructure surrounded by the areas with high level infrastructure (HH) to the area with low level surrounded by the areas with low level (LL). The area of HH type showed big numbers of passengers, trips and transfers, whereas the area of LL type shows big figures of internal trip frequency, travel time, travel distance, travel speed and transit fare. Global regression analysis showed that number of passengers, number of transfers, number of internal trips and mean travel speed are important to the level of transportation infrastructure. GWR with these four significant variables significantly improved the AICs and ANOVA results, which implies that the infrastructure is likely explained by travel characteristics differently between geographical areas in Gyonggi Province.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.221-228
• /
• 2017

With the recent development of IoT technology, medical services using IoT technology are increasing in many medical institutions providing health care services. However, as the number of IoT sensors attached to the user body increases, the healthcare information transmitted to the server becomes complicated, thereby increasing the time required for analyzing the user's healthcare information in the server. In this paper, we propose a deep learning based health care information management method to collect and process healthcare information in a server for a large amount of healthcare information delivered through a user - attached IoT device. The proposed scheme constructs a subnet according to the attribute value by assigning an attribute value to the healthcare information transmitted to the server, and extracts the association information between the subnets as a seed and groups them into a hierarchical structure. The server extracts optimized information that can improve the observation speed and accuracy of user's treatment and prescription by using deep running of grouped healthcare information. As a result of the performance evaluation, the proposed method shows that the processing speed of the medical service operated in the healthcare service model is improved by 14.1% on average and the server overhead is 6.7% lower than the conventional technique. The accuracy of healthcare information extraction was 10.1% higher than the conventional method.

• The Journal of Bigdata
• /
• v.7 no.2
• /
• pp.235-244
• /
• 2022

The rental history data of public bicycles in Seoul were analyzed to examine how pandemic phenomena such as COVID-19 caused changes in people's micro mobility. Data for 2019 and 2021 were compared and analyzed by dividing them before and after COVID-19. Data were collected from public data portal sites, and data marts were created for in-depth analysis. In order to compare the changes in the two periods, the riding direction type dimension and the rental station type dimension were added, and the derived variables (rotation rate per unit, riding speed) were newly created. There is no significant difference in the average rental time before and after COVID-19, but the average rental distance and average usage speed decreased. Even in the mobility of Ttareungi, you can see the slow rhythm of daily life. On weekdays, the usage rate was the highest during commuting hours even before COVID-19, but it increased rapidly after COVID-19. It can be interpreted that people who are concerned about infection prefer Ttareungi to village buses as a means of micro-mobility. The results of data mart-based visualization and analysis proposed in this study will be able to provide insight into public bicycle operation and policy development. In future studies, it is necessary to combine SNS data such as Twitter and Instagram with public bicycle rental history data. It is expected that the value of related research can be improved by examining the behavior of bike users in various places.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.688-696
• /
• 2016

This paper evaluates the effect of hot weather conditions on the fresh concrete characteristics of 80-MPa high-strength concrete. The slump flow, packing ability, setting time, hydration heat, and compressive strength were evaluated under exterior temperatures of $20^{\circ}C$, $30^{\circ}C$, and $40^{\circ}C$. The slump flow, arrival speed of 500 mm, and their changes with the elapsed time were found to bring the occurrence of rapid slump loss forward by about 30 minutes when increasing the temperature by $10^{\circ}C$ from $20^{\circ}C$. The initial and final setting times of the concrete at $20^{\circ}C$ were 7 hours and 12 hours, which were reduced by 1 hour and 3 hours at $30^{\circ}C$ and by 2 hours and 5 hours at $40^{\circ}C$, respectively. The hydration heat characteristics at $20^{\circ}C$ and $30^{\circ}C$ were similar in terms of the highest temperature of the concrete casting depth and the time when the maximum temperature occurred. However, at $40^{\circ}C$, the maximum temperature occurred about 4 hours earlier, and the highest temperature per the concrete casting depth increased by about $12^{\circ}C$. Therefore, it is concluded that the characteristics can vary according to the exterior temperature. Thus, quality assurance should consider workability, temperature cracks due to hydration heat, the properties of strength development, and other characteristics.

• Journal of the Korean Society of Radiology
• /
• v.81 no.5
• /
• pp.1151-1163
• /
• 2020

Purpose This study aimed to evaluate changes of subprosthetic pannus on cardiac CT and determine its relationship to echocardiographic findings in patients with mechanical aortic valve replacement (AVR). Materials and Methods Between April 2011 and November 2017, 17 AVR patients (56.8 ± 8.9 years, 12% male) who showed pannus formation on CT and had undergone both follow-up CT and echocardiography were included. The mean interval from AVR to the date of pannus detection was 10.5 ± 7.1 years. In the initial and follow-up CT and echocardiography, the pannus extent and echocardiographic parameters were compared using paired t-tests. The relationship between the opening angle of the prosthetic valve and the pannus extent was evaluated using Pearson correlation analysis. Results The pannus extent was significantly increased on CT (p < 0.05). The peak velocity (3.9 ± 0.8 m/s vs. 4.2 ± 0.8 m/s, p = 0.03) and mean pressure gradient (36.4 ± 15.5 mm Hg vs. 42.1 ± 15.8 mm Hg, p = 0.03) were significantly increased. The mean opening angles of the mechanical aortic leaflets were slightly decreased, but there was no statistical significance (73.1 ± 8.3° vs. 69.4 ± 12.1°, p = 0.12). The opening angle of the prosthetic leaflets was inversely correlated with the pannus extent (r = -0.57, p < 0.001). Conclusion The pannus extent increases over time, increasing transvalvular peak velocity and the pressure gradient. CT can be used to evaluate the pannus extent associated with hemodynamic changes that need to be managed by surgical intervention.

• Journal of the Korean earth science society
• /
• v.37 no.2
• /
• pp.107-116
• /
• 2016

Stability of the barotropic Rossby-Haurwitz wave is investigated using the numerical models on the global domain. The Rossby-Haurwitz wave under investigation is composed of the basic zonal flow of super-rotation and a finite amplitude spherical harmonic wave. The Rossby-Haurwitz wave is given as either steady or unsteady wave by adjusting the strength of the super-rotating zonal flow. Stability as well as the growth rate of the wave in the numerical simulation is determined by comparing the perturbation amplitude at two different time stages. Unstable modes of the Rossby-Haurwitz wave exhibited a horizontal structure composing of various zonal-wavenumber components. The vorticity perturbation for some modes showed a discontinuity around the area of weak flow, which was found robust regardless of the horizontal resolution of the model. Fourier finite element model was shown to generate the unstable mode in earlier stage of the time integration due to less accuracy compared to the spherical harmonic spectral model. Taking the overall accuracy of the models into consideration, the time by which the unstable mode begin to dominate over the spherical harmonic wave was estimated.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1004-1010
• /
• 1998

Effects of reaction conditions such as power input and feeding time and feeding mode of reactants on the reaction crystallization of lanthanum oxalate in semi-batch reactor were investigated experimentally. Even though the crystal size distribution of lanthanum oxalate was always monomodal, its mean crystal size was significantly varied with the reaction conditions. As the power input and reactant feeding rate increased, the mean crystal size was reduced and the relative induction time was prolonged. The mean crystal size produced in oxalic acid feeding mode was smaller than that in lanthanum chloride feeding mode, but the trend of the relative induction time with the feeding mode was reverse to that of the mean crystal size. The crystal morphology of lanthanum oxalate, which was produced within the ranges of the reaction conditions in our experiment, was maintained as a needle shape.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1B
• /
• pp.71-79
• /
• 2011

This paper proposes a compiled-code simulator generation system based-on machine description language for efficient design space exploration in designing an embedded system optimized for a specific application. The proposed system generates a compiled-code simulator which maintains the functional accuracy of an event-driven simulator by determining instruction fetch and decoding processes statically. Generated simulator takes instruction-level and cycle-level simulation for estimating performances in embedded core. To show the efficiency of the constructed compiled-code simulator generator, architecture exploration had been performed for the JPEG encoder application. Starting with MIPS R3000 processor for one embedded core, the proposed system can produce the core showing optimized execution time for the application programming. In this process, a huge amount of simulation time has been used. Cycle-level compiled-code simulator has the functional accuracy and shows performance improvement by 21.7% in terms of simulation speed on the average when compared with an event-driven simulator.