• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.179-185
• /
• 2020

DRAM is a major component of the main memory system. As the operating system evolves and application complexity and capacity increases, the capacity and speed of DRAM are also increasing. DRAM should perform a refresh action of periodically reading and then re-storing stored values, and the accompanying performance and power/energy overhead embodies characteristics that worsen as capacity increases. This study proposes an energy efficiency improvement technique that efficiently stores the rows that need to be refreshed within 64ms and 128ms using the bloom filter for cells with the lowest retention time of electrons. The results of the experiment showed that the proposed technique resulted in an average 5.5% performance improvement, 76.4% reduction in average refresh energy, and 10.3% reduction in average EDP.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.189-189
• /
• 1994

Q-35의 일회 및 반복투여 연구결과, 자타학 증상은 단지반복투여 피험자에서 중등도의 두통(1예)과 설사(3예)가 관찰되었으나 이들 설사증례는 장내 세균총 검사상 복감염에 의한 것이 아니었다. Q-35 투여 후 Q-EEG 및 평행기능의 장애 등은 관찰되지 않았으며 임상화학 검사상 반복투여 3예에서 SGOT, SGPT의 경미한 상승을 보였으나 이러한 변화는 정상 범위내에서의 변화이었다. Q-35의 반복투여에 따라 투약 3일에서 8일에 걸처 장내세균총은 일부 호기성 및 혐기성 세균총의 감소를 보였으나 투약종료 10일 후에는 투약전 상태로 회복되었다. Q-35는 투여량의 약 70 % 가 24시간 뇨중으로 배설되었으며 일회 및 반복투여의 결과 용량의존적인 동태양상은 관찰할 수 없었다. 50 mg에서 400 mg까지 일회 투여시 5.6-7.1 시간의 혈장반감기를 보였으며, 반복투여 시험에서는 평균 5.6 $\pm$ 0.7 시간의 반감기를 보였다. Q-35는 타액내로 신속히 이행되었으며 타액내 AUC는 혈장 AUC의 약 75 %에 해당하였고, 식사에 의해 약간의 흡수속도지연(Cmax 0.4 시간지연)과 공복시에 비해 82 %의 상대적 생체이용율을 보였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.2 s.54
• /
• pp.1-9
• /
• 2007

The method of generating the artificial acceleration time histories for seismic analysis based on genetic algorithms is presented. For applying to the genetic algorithms, the frequencies are selected as the decision variables eventually to be genes. An arithmetic average crossover operator and an arithmetic ratio mutation operator are suggested in this study. These operators as well as the typical simple crossover operator are utilized in generating the artificial acceleration time histories corresponding to the specified design response spectrum. Also these generated artificial time histories are checked whether their outward features are to be coincident with the recorded earthquake motion or not. The features include envelope shape, correlation condition between 2 horizontal components of motion, and the relationship of max. acceleration, max. velocity and max. displacement of ground.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.710-710
• /
• 2012

구형펄스모형(Rectangular Pulse Model)에서 반영하지 못하는 강우의 군집특성을 잘 반영하는 NSRPM(Neyman-Scott Rectangular Pulse Model) 강우생성 모형은 수자원 분야에 널리 쓰이고 있다. 일반적으로 NSRPM의 5개의 매개변수를 추정하는 최적화기법으로 DFP(Davidon-Fletcher-Powell)과 유전자알고리즘(Genetic Algorithm)을 사용하고 있다. 그러나 DFP는 주어진 초기 값에 따라 민감하며 각 반복 단계마다 헤시안행렬(Hessian Matrix)을 계산하여야 하며 추정된 전체의 해가 국지해에 수렴 할 수 있는 단점이 있다. 유전자 알고리즘을 DFP와 다르게 헤시안 행렬을 사용하지 않고 최적화를 할 수 있다는 장점이 있으나 시간이 오래 걸리는 단점이 있다. 이에 본 연구에서는 이러한 단점을 보완, 강화 하기위해서 최적화 기법으로 반복 단계마다 미분계산이 필요하지 않고 빠른 속도로 계산이 가능한 Nelder-Mead 알고리즘 이용하여 NSRPM매개변수를 추정하고 정확도를 비교하였다. 표 1은 각 기법을 이용하여 추정된 매개변수를 이용하여 생성한 강우의 통계특성과 관측된 통계특성의 상대오차를 나타낸 것이다. 괄호 안 숫자는 중첩되지 않는 누적시간을 나타낸다. 상대오차는 다음과 같다(식 1). 분석결과 Nelder-Mead 기법이 1시간의 평균, 공분산과 6시간 분산 등 전체적으로 GA, DFP보다 높은 정확도를 보였다.

• Annual Conference of KIPS
• /
• 2010.11a
• /
• pp.1595-1598
• /
• 2010

임베디드 시스템의 설계 복잡도가 높아지고, 설계 확인 및 수정 비용이 증가하면서 목표 아키텍처가 결정되기 전, 즉 시스템의 설계 초기 단계에서의 적절한 소프트웨어 검증이 더욱 더 중요해지고 있다. 이러한 초기 단계의 시뮬레이션은 높은 성능을 보이면서도 기능과 타이밍, 하드웨어 아키텍처, 태스크 할당, 그리고 스케줄링 정책 등을 잘 반영해야 한다. 특히 외부와의 시간 의존적인 상호 작용이 있는 경우 이를 반영하는 것은 어려운 문제인데 기존 연구[1]에서는 반복 시뮬레이션을 통해 이를 반영할 수 있도록 하였으나, 시뮬레이션 결과의 수렴 속도에 따라 총 시뮬레이션 시간이 증가한다는 약점이 있었다. 본 연구에서는 시스템의 명세 조건에 따라, 가능한 경우 반복 시뮬레이션을 피하고 단일 시뮬레이션만으로 시뮬레이션 결과를 얻음으로써 시뮬레이션 시간을 크게 단축할 수 있는 방법을 제시하였다. 연구의 결과는 반복 시뮬레이션 예제, 로봇 예제, 센서 네트워크 예제 등의 예제를 통해 검증되었으며 시뮬레이션 성능은 평균적으로 약 2.31 배 향상되었다.

• Journal of Biomedical Engineering Research
• /
• v.19 no.4
• /
• pp.379-384
• /
• 1998

To measure precisely the blood velocity in the skin microcirculation, we have used time domain correlation (called Cross-Correlation) based on the processing of the backscattered RF signal obtained with a wideband echographic imaging transducer, although it is difficulties of adaptation of the pulsed wave system, because of the data processing in real time and the hardware problem. This dedicated technology based on a 20MHz echographic imaging system has been developed. We present how the experimental data, i.e. the backscattered RF signal, have to be analyzed. After RF lines realignment, stationary echo canceling procedure and correlation level control, a velocity profile has been obtained. In-vitro result show that velocity measurements as low as 0.1mm/sec attainable with a 80${\mu}m$ in axial resolution. We have also validated with in-vivo experimentation on the external ear of a rabbit using B-mode sector scanning image and M-mode image of a custom made 20MHz skin image system. The flow of the "auriculares caudales" vein, a microvessel of 600 m diameter, has been detected and studied. This technique will allow a more precise exploration of circulatory troubles in cutaneous pathologies.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2048-2061
• /
• 1991

As compared with other cutting types, the ball end milling process causes a complexity in cutting system and a falling-off of machinability. In order to increase the productivity and efficiency in th NC machining of sculptured surfaces, this study carried out the qualitative linearized evaluation about the ball end milling system and applied their practical expressions to the technological processor at the cutter path planning stage. The evaluated expressions were proved to be adequate for practical use from an accuracy point of view and the estimation models were applied to sculptured surface machining processes for finding variable machining conditions. Consequently, it was recognized that variable machining conditions bring about the dispersion of force system and the reduction of machining time by more than 50%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.22-33
• /
• 2005

In this paper, an efficient signal interference control technique to improve the high convergence speed of LMS algorithms is introduced in the adaptive transversal filter of DS/SS. The convergence characteristics of the proposed algorithm, whose coefficients are multiply adapted in a symbol time period by recycling the received data, is analyzed to prove theoretically the improvement of high convergence speed. According as the step-size parameter ${\mu}$ is increased, the rate of convergence of the algorithm is controlled. Also, an increase in the stop-size parameter ${\mu}$ has the effect of reducing the variation in the experimentally computed learning curve. Increasing the eigenvalue spread has the effect of controlling which is downed the rate of convergence of the adaptive equalizer. Increasing the steady-state value of the average squared error, proposed algorithm also demonstrate the superiority of signal interference control to the filter algorithm increasing convergence speed by (B+1) times due to the data-recycling LMS technique.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.3
• /
• pp.84-94
• /
• 2019

This paper developed the VSL control algorithms for various traffic conditions in tunnels. Various algorithms determining control speed, buffer speed, and display time were suggested in order to apply three gantry locations. The algorithms were evaluated by constructing simulation environments using python and VISSIM Com-Interface. Results show that speed difference between congested flow and normal flow was 50 km/h without algorithm application, but the difference was reduced to 20 km/h with algorithm application. In addition, the length of congested region in the exit section of the tunnel was also reduced from 800m to 300m with algorithm application. It is expected that the traffic accidents in tunnels may be reduced since the average and standard deviation of the speed are greatly reduced after applying the algorithms suggested.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.142-155
• /
• 2019

This study was conducted with the aim of developing a system to collect taxi GPS probe information to prevent link defects and to improve the accuracy of the standard link-based travel speed by determining when to go into and come out the link. For this purpose, a framework and algorithm consisting of a five-step process for standard link-based map matching and individual vehicle travel speed are presented and used it to calculate the average travel speed of the service link. Two on-site surveys of Teheran and Hakdong-ro were conducted to verify the results by the methods proposed in this paper. On the basis of the overall time of the field survey, the deviation in the travel speed was 0.2 km/h and 0.6 km/h, the accuracy was 99% and 96%, and the MAPE(Mean Absolute Percentage Error) was 1% and 4% in Teheran and Hakdong-ro, respectively. These results were more accurate thand those obtained using conventional methodologies without standard links.