• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2262-2264
• /
• 2003

본 논문에서는 도선의 결함 유무와 결함 위치를 측정하는 방법으로 널리 사용되고 있는 시간 영역 반사파 처리 기법(Time Domain Reflectometry : TDR)의 성능 향상을 위하여 가우시안 형태를 가지는 입력 신호와 상호 상관 관계 함수를 이용한 신호 처리 방법을 제안한다. 일반적으로 TDR은 입력 신호와 반사 신호의 시간 지연을 측정해서 결함 위치를 측정하게 되므로, TDR 방법으로 결함 위치를 측정하는데 있어 시간축 분해능의 정도에 따라 측정 방법의 성능이 크게 좌우된다. 따라서, 본 논문에서는 제한된 시간축 분해능에서 결함 위치 측정의 정확도를 향상시키기 위해 가우시안 형태를 갖는 입력 신호 및 반사 신호와의 상호 상관관계 함수를 사용한다. 한편, 실제 도선에 적용하여 기존의 TDR 방법과 측정 성능을 비교 분석함으로써 본 논문에서 제안하는 방법의 우수성을 검증한다.

• Journal of the Ergonomics Society of Korea
• /
• v.2 no.2
• /
• pp.25-27
• /
• 1983

당사는 부산에 위치한 각종 소화기 및 자동차부품 생산업체로서, 1972년 우리나라 중요 방위산업체의 하나로 발족하였다. 공장 발족 당시 공장의 배치 및 관리기술을 미국에서 도입하였기 때문에, 작업관리면에서도 I.E. 기법들이 적용되어 생산성 향상에 많은 성과가 있었다. 작업측정이 란 작업자가 행하는 여러가지 활동을 시간을 매체로 하여 측정하는 것으로서 작업 및 관리의 과학화 에 필요한 자료를 얻고자 하는 것인데, 그 주요 목적은 표준시간의 설정에 있다. 이러한 작업측정 은 크게 스톱 워치(stop watch)나 촬영에 의한 직접 측정방법인 시간연구법과 PTS (Predetermined Time Standards)법으로 나눌 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1997.05a
• /
• pp.475-479
• /
• 1997

다공질매체에서의 포화-비포화 흐름 거동을 파악하기 위하여는 시간에 따른 함수량의 변화과정을 정확하고 빠르게 측정하여야 한다. 본 연구는 실험실에서 함수량을 측정하는 방법의 하나로서 TDR(Time Domain Reflectometer)을 사용하는 실험 방법에 관한 연구이다. TDR 이란 전기신호의 전도특성 이용하여 토양내 설치된 탐침(probe)의 전기신호 반향시간을 측정하는 기기로서 이 반향시간과 토양의 유전율상수(dielectric constant)의 관계를 이용하여 함수량을 추정할 수 있다. 본 연구에서는 TDR의 원리설명과 이를 이용한 함수량측정방법을 제시하고 있다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.809-812
• /
• 2008

Bleed test methods currently being specified in KS, ASTM and BS are the methods to read the height of bleed water and volume changes of mortar poured into transparent cylinder. Time for measuring of bleed are specified as 3, 20 hours in KS specification, while bleed is measured at 3 hour and change of volume is measured at 24 hour in ASTM and BS specification. Like these, bleed test takes a lot of time to conduct. Another method to measure the bleed is the pressure filter test. This method predict the bleed by measuring the passed water through the fiber glass filter under pressure. This pressure filter test developed by Schupack in 1971 has an advantage in predicting the bleed in shorter time. However, data correlating the pressure filter test results with amount of bleed are limited. Therefore, this study aims at verifying the availability of pressure filter test as a method to predict the bleed and deriving the relation between this test results and bleed.

• Analytical Science and Technology
• /
• v.14 no.1
• /
• pp.64-71
• /
• 2001

In this paper, the formula of lower limit of detection considering the measuring time of sample and background was derived using the basic concepts of lower limit of detection. Among parameters affecting the determination of MDA value, the MDA values were calculated with variation of amount of sample and measuring time of sample and background. The results of adequate division between the measuring time of sample and that of background studied in this research make it possible to evaluate confidence limits on the radio analytical results in the environmental sample.

• Journal of Digital Contents Society
• /
• v.10 no.4
• /
• pp.501-507
• /
• 2009

On intranet system, it is essential element for providing information to decrease response time. To realize this efficiencies of response time of the network, a lot of research have been conducted. The purpose of the research and implementation is to shorten the response time of information system. We can realize final goal of information system through fast response time. This final goal of information system is to secure the performance efeciency within the required time. In order to acquire the method of warranty of fast response time, the efficient measurement method is essential. This research suggests a latency test techniques being used on infrastructure system and also offers a response time measurement methodology. Methodology proposed in this research has proven that it is possible to measure response time through the scheduled method. Also it is possible to develop a enhanced networking capabilities, and information system capabilities for the development of information system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.835-840
• /
• 2020

In this paper, we described the verification results on method by using the computer simulation and practical experiment for reduction of total radiated power (TRP) measurement time consuming tens of hours. TRP measurements are used in the 5G band in order to exactly evaluate the wireless communication equipment, but it takes a long measurement time because of dense sampling interval. Moreover, if there are various beam forming scenarios, the total measurement time increases exponentially. Therefore, the world-wide research on reduction method of the TRP measurement time is intensively on going. The verified method in this paper is to calculate the TRP through effective isotropical radiated power (EIRP). At first, the relation of TRP and EIRP was investigated, and an antenna for testing was designed and constructed. And, the amount of error was analyzed through simulation and measurement. The analysed results showed that the derived TRP through EIRP has very small error. This method could be applied for TRP measurements of 5G wireless communication equipments.

• The Magazine of the IEIE
• /
• v.36 no.12
• /
• pp.31-37
• /
• 2009

본 논문에서는 USN 시스템 구현을 하기 위한 노드 감지기를 설계하고 성능을 분석하였다. 온도 응답특성에서 USN 노드는 100ms 이후에 안정된 특성을 보였고, ZF5585는 50ms 이후 안정되나 이후 출력이 안정되지 않고 빠른 출력을 내보내지 못하는 문제점이 개선되었다. 온도시간의 측정결과 USN 노드는 PT100에 비해 온도 측정시간이 균일하게 나타났고 측정시간도 짧았다.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.118-125
• /
• 2014

An approximation of speed of sound in the measurement plane is essential for the inverse estimation of temperature. To this end, an inverse problem relating the measured retarded time data in between set of sensors and actuators array located on the wall is formulated. The involved transfer matrix and its coefficient vectors approximate speed of sound of the measurement plane by using the radial basis function with finite number of interpolation points deployed inside the target field. Then, the temperature field can be reconstructed by using spatial interpolation technique, which can achieve high spatial resolution with proper number of interpolation points. A large number of retarded time data of acoustic paths in between sensors and arrays are needed to obtain accurate reconstruction result. However, the shortage of interpolation points due to practical limitations can cause the decrease of spatial resolution and deterioration of the reconstruction result. In this works, a regeneration for obtaining the additional retarded time data for an arbitrary acoustic path is suggested to overcome the shortage of interpolation points. By applying the regeneration technique, many interpolation points can be deployed inside the field by increasing the number of retarded time data. As a simulation example, two rectangular duct sections having arbitrary temperature distribution are reconstructed by two different data set: measured data only, combination of measured and regenerated data. The result shows a decrease in reconstruction error by 15 % by combining the original and regenerated retarded time data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.4
• /
• pp.269-275
• /
• 2022

In ideal configuration, elapsed-time method can measure the exact reaction wheel speed. But in real configuration, the speed measurement error exists due to tacho pulse non-uniformity. In this research, we study the method which overcome the non-uniformity effects. First, we introduce the method which spin the wheel at the specific speed and measure the non-uniformity. Then, we propose the real-time measurement error correction method which uses the obtained non-uniformity information. This method calculate the speed candidates from the elapsed-time method's counts and non-uniformity information, and choose the closest speed to the real speed. Through simulation, we show that proposed method measure the exact speed regardless of non-uniformity, and fast wheel speed control is possible.