• Journal of Power System Engineering
• /
• v.8 no.3
• /
• pp.23-29
• /
• 2004

In this paper, a finite element formulation using dynamic-explicit time integration scheme is used for numerical analysis of Hydro-forming processes. The lumping scheme is employed for the diagonal mass matrix and dynamic explicit formulation. Hydro-forming process for auto-body panel forming is analyzed by using dynamic-explicit finite element method. Further, the simulated results of the Hydro-forming processes are shown and discussed. Its application is being increased especially in the automotive industrial area for the cost reduction, weight saving, and improvement of strength.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.4
• /
• pp.185-191
• /
• 2003

In this Paper, we propose an accurate and stable solution of the transient electromagnetic response from three-dimensional arbitrarily shaped conducting objects by using a time domain magnetic field integral equation. This method does not utilize the conventional marching-on in time (MOT) solution. Instead we solve the time domain integral equation by expressing the transient behavior of the induced current in terms of temporal expansion functions with decaying exponential functions and Laguerre·polynomials. Since these temporal expansion functions converge to zero as time progresses, the transient response of the induced current does not have a late time oscillation and converges to zero unconditionally. To show the validity of the proposed method, we solve a time domain magnetic field integral equation for three closed conducting objects and compare the results of Mie solution and the inverse discrete Fourier transform (IDFT) of the solution obtained in the frequency domain.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.4
• /
• pp.52-62
• /
• 1996

In this paper, a new continuous-time current-mode integrator as basic building block of the low-voltage analog current-mode active filters was proposed. Compared to the current-mode integrator which was proposed by Zele, the proposed current-mode integrator had higher unity gain frequency and output impedance in addition to lower power dissipation. And also, a current-mode third-order lowpass active filter was designed with the proposed current-mode integrator. The designed circuits were fabricated using the ORBIT's 1.2.mu.m double-poly double-metal CMOS n-well process. The experimental resutls of the active filter designed and fabricated for this research have shown that it has the performance of 44.5MHz cutoff frequency, 3.3mW power dissipation and the third-order active filter area was 0.12mm$^{2}$.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.98-111
• /
• 1995

High temperature low cycle fatigue shows that cycle-dependent crack growth owing to cyclic plastic deformation occurred simultaneosly with time-dependent crack growth owing to intergranular deformation. Consequently, to estimate crack growth rate uniquely, many to investigators have proposed various kinds of parameters and theories but these could not produce satisfactory results. Therefore the goal of this study is focused on prediction of crack growth rate using predominant damage rule, linear cumulative damage rule and transitional parameter ${\Delta}J_c/{\Delta}J_f$. On the basis of these sinusoidal loading waveform at 600$^{\circ}C$ and 700$^{\circ}C$.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.378-386
• /
• 2002

Multi-path ultrasonic Sow measurement system uncertainty is determined by assigning an expected error of each component of flow measurement and then defining the total flow measurement uncertainty as square root of the sum of squared values of the individual error. Sources of uncertainty for flow measurement are geometry, transit time and velocity profile integration uncertainty. A theoretical uncertainty model for multi-path ultrasonic transit time flowmeter configured with parallel 5 chords, is derived from and calculated by dry calibration method.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.453-458
• /
• 2004

This study proposes a new two-level condensation scheme for the construction of a reduced system. In the first step, the candidate area is selected for the construction of the reduced system by energy estimation in element-level. In the second step, primary degrees of freedom are selected by sequential elimination from the candidate degrees of freedom linked to the selected elements. Numerical examples demonstrate that the proposed method saves the computational cost effectively and provides a reduced system which predicts the eigenvalues accurately. Moreover, the well-constructed reduced system can present the reliable behavior of the structure under arbitrary dynamic loads comparing to that of global system. Time integration in a reduced system can save the computing time remarkably. Through a few numerical examples, the efficiency and reliability of the proposed scheme are verified.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.380-390
• /
• 1998

In the present work a finite element formulation using dynamic explicit time integration scheme is used for numerical analysis of auto-body panel stamping processes. The lumping scheme is employed for the diagonal mass matrix and linearizing dynamic formulation. A contact scheme is developed by combining the skew boundary condition and direct trial-and-error method. In this work, for economic analysis the faster punch velocity and the mass scaling method are introduced. To investigate the effects of punch velocity and mass scaling, the various values of punch velocity and the various mass scalings are used for numerical analysis. Computations are carried out for analysis of complicated auto-body panel stamping processes such as forming of an oil pan and a fuel tank.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.59-68
• /
• 2005

In this study, we establish a theory for dynamic behaviors of an automatic ball balancer, analyze its dynamic characteristics, and provide its design guide line. Equations of motion are derived by using the polar coordinate system instead of the rectangular coordinate system which was previously used in other researches. After non-dimensionalization of the equations, the perturbation method is applied to locate the equilibrium positions and to obtain the linearized equations of motion around the equilibrium positions. The Eigenvalue problem is used to verify the dynamic stability around the equilibrium positions. On the other hand, the time responses are computed from the nonlinear equations of motion by using a time integration method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1971-1973
• /
• 2009

본 연구에서는 하천에 유입된 오염물질의 거동 및 확산 특성을 파악하기 위하여 하천에서 추적자를 이용한 현장실험을 실시하였으며, 실험구간은 경상북도 경주시 에 위치한 하천으로 총 길이 2km, 평균폭 25m로 이루어진 대종천이다. 현장실험에서의 추적자 실험결과를 수치모형과 비교하기 위해 2차원 수심적분 모형인 RMA2, RMA4를 이용하였다. 2차원 동수역학적인 모형인 RMA2를 사용하여 흐름장을 모의한 후 계산결과를 2차원 수질모형인 RMA4에 입력하여 농도자료를 모의하였으며 상 하류단의 경계조건은 현장 실험시 실측한 상류단의 유량과 하류단의 수위를 적용하였다. 실측한 자료를 경계조건으로 모형에 적용하여 시간에 따른 농도값을 계산하였으며, 그 계산값을 추적자의 농도 관측값과 비교하였다. 계산결과는 서로 잘 일치하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.645-648
• /
• 2017

실외 환경에서는 일반적으로 드론의 위치 측정 또는 위치 제어를 위해서 위성항법장치를 사용한다. 위성항법장치는 실내 환경에서 신호 수신이 어렵기 때문에 실내에서의 위치 측정과 항법을 수행하기 위해서 많은 연구가 이루어진다. 기존의 연구들은 드론에 추가적인 센서를 요구하거나 사전 실내 환경 설정을 가정한다. 그러나 추가적인 장치나 환경 설정 없이 드론의 관성항법장치만으로도 위치 측정이 가능하다. 관성항법장치는 가속도를 적분하여 이동한 거리를 파악하기 때문에 시간이 지날수록 오차가 누적되는 문제점이 있으며 비행 중 기체 진동으로 인한 측정 오차로 정확한 이동거리를 산출해내는 것이 어렵다. 따라서 본 논문에서는 이러한 문제들을 드론의 특성을 반영하여 관성항법장치로부터 발생한 오차를 줄여 보다 정확한 드론의 실내 위치측정 방법을 제안한다.