KSCE Journal of Civil and Environmental Engineering Research
/
v.39
no.6
/
pp.887-892
/
2019
Many researchers have developed a series of vision-based technologies to monitor construction sites automatically. To achieve high performance of vision-based technologies, it is essential to build a large amount and high quality of training image database (DB). To do that, researchers usually visit construction sites, install cameras at the jobsites, and collect images for training DB. However, such human and site-dependent approach requires a huge amount of time and costs, and it would be difficult to represent a range of characteristics of different construction sites and resources. To address these problems, this paper proposes a framework that automatically constructs a training image DB using web crawling techniques. For the validation, the authors conducted two different experiments with the automatically generated DB: construction work type classification and equipment classification. The results showed that the method could successfully build the training image DB for the two classification problems, and the findings of this study can be used to reduce the time and efforts for developing a vision-based technology on construction sites.
Kim, Sung-Hu;Kim, Kwang-Soo;Han, Kyoung-Bong;Song, Seul-Ki;Park, Sun-Kyu
Journal of the Korea Concrete Institute
/
v.20
no.6
/
pp.765-772
/
2008
For RC structures, long-term deformation occurs due to the inherent characteristics, which are creep and shrinkage. In terms of serviceability, it is important to limit deflection caused by the deformation to the allowable deflection. In the recent years, various repair and strengthening methods have been used to improve performance of the existing RC structures. One of the typical methods is FRP externally bonded method (EBR). Fiber reinforced polymer (FRP) has been used worldwide as repair and strengthening materials due to its superior properties. Besides, it has to offer improved strengthening performance not only under instantaneous load but sustained load. Therefore, accurate prediction method of deflection for the RC members externally bonded with FRP under sustained load is required. In this paper, three beams were fabricated. Two beams were externally strengthened with one of CFRP plate and GFRP plate respectively. Total three beams were superimposed under sustained load of 25 kN. During 470 days, deflections at midspan were obtained. Moreover, creep coefficients and shrinkage strains were calculated by using ACI-209 code and CEB-FIP code. In order to predict the deflection of the beams, EMM, AEMM, Branson's method and Mayer's method were used. Through the experiment, it was found that the specimen with CFRP plate has the most flexural capacity and Mayer's method is the most precise method to predict total long-term deflections.
Proceedings of the Plant Resources Society of Korea Conference
/
2010.10a
/
pp.3-3
/
2010
GM 들잔디의 환경위해성평가는 유전자변형생물체의 국가간이동등에 관한 법률 (2008년)에 안전관리 및 시험평가가 수행되었다. 일반적으로 GM 작물의 환경위해성평가는 도입 유전자의 안정적 발현여부, 일반적으로 사용되어온 식물과의 실질적 동등성, 화분비산에 의한 유전자이동성 검정, GM재배작물 주변 환경에 미치는 영향, GM작물 및 유전자의 인체 및 동물에 대한 안전성 평가, 위해성 관리 등이 있다. 본 발표에서는 제초제저항성 GM 들잔디를 실용화 하기위한 환경위해성평가의 내용을 소개하기 위하여 GM 들잔디의 안전성평가를 수행한 포장시험에 대해서 간략히 발표하고자 한다. GM 들잔디는 제초제저항성 유전자가 식물체내에 1개의 복제수를 갖으며, 후세대에서도 안정적으로 발현되었다. 또한 TAIL PCR을 통한 도입 유전자의 삽입 부위를 확인하였고, 주변염기서열을 이용한 JG21 들잔디 만의 특이적 염기서열을 얻었다. GM 들잔디의 실질적 동등성검정은 격리온실 수준과 격리포장 수준에 생물학적, 화학적 특성을 조사하였고, 일반 들잔디와 큰 차이가 없음을 확인하였다. GM 들잔디의 화분은 일광조건하에서 약 1시간 이내에 불활성 되었고, 실내의 실온조건에서는 3시간까지 활성이 유지되었다. GM 들잔디 재배포장 ($12m{\times}6m$ 크기)으로부터 화분비산 밀도는 3 m 이내에서 높게 나타났고, 9 m 이상의 거리에서는 낮은 빈도로 일정하게 나타났다. 화분비산에 의한 GM 들잔디 유전자이동성은 근접거리에서 약 15%가 관찰되었고, 반경 3 m 이내에서 거리에 따라서 2 ~ 0.12%의 유전자이동성이 관찰되었다. 각각의 시험모형에 따른 GM 들잔디와 일반들잔디 간의 교잡율을 조사한 결과 들잔디 교잡율은 GM 잔디의 면적과 거리에 의존적이었고, GM 들잔디 면적에 따라서 6-21%의 교잡율이 나타났다. GM들잔디의 인체위해성평가는 독성 및 알레르기 반응성을 검정하였고, 도입유전자 산물인 PAT 단백질은 독성 및 알레르기 반응성이 없음이 알려져 있다. 본 연구에서는 GM들잔디의 독성 및 알레르기 반응성을 검토한 결과 아플라톡신 등의 독성은 검출되지 않았으나, GM과 일반 들잔디 모두에서 화분 알레르기 반응성이 양성으로 나왔다. 그러나 GM들잔디에 도입된 유전자에 의한 알레르기 반응이 아닌 일반들잔디 화분에 가진 알레르겐에 의한 반응성이라 할 수 있다. GM들잔디의 비의도적 방출가능성을 조사하기위하여 시험포장외부의 자연환경에 대해서 환경모니터링을 수행한 결과 GM 들잔디의 유출 및 유전자이동 의한 제초제저항성 들잔디는 나타나지 않았다.
Cha, Kyunghwa;Kim, Sung-Wook;Kim, Jung Hoon;Park, Mi-Yun;Kong, Jung Sik
Journal of the Computational Structural Engineering Institute of Korea
/
v.28
no.3
/
pp.229-239
/
2015
In light of the significant increase in the quantities of goods transported and the development of the shipping industry, the frequency of usage of port structures has increased; yet, the government's budget for the shipping & port of SOC has been reduced. Port structures require systematically effective maintenance and management trends that address their growing frequency of usage. In order to construct a productive maintenance system, it is essential to develop deterioration models of port structures that consider various characteristics, such as location, type, use, constructed level, and state of maintenance. Processes for developing such deterioration models include examining factors that cause the structures to deteriorate, collecting data on deteriorating structures, and deciding methods of estimation. The techniques used for developing the deterioration models are multiple regression analysis and Markov chain theory. Multiple regression analysis can reflect changes over time and Markov chain theory can apply status changes based on a probabilistic method. Along with these processes, the deterioration models of open-type and gravity-type wharfs were suggested.
Steel reinforced concrete(SRC) columns, which have been widely employed in high-rise buildings, exhibit a time-dependent behavior because of creep and shrinkage of concrete. This long-term behavior may cause a serious serviceability problem in structural systems, so it is very important to predict the deformation due to creep and shrinkage of concrete. However, it was found from the previous experimental studies that the long-term deformation of SRC columns was quite dissimilar from that of RC columns. A new method is required to quantitatively predict the long-term deformation of SRC columns. In this study, the causes of the discrepancy between the behaviors of RC and SRC columns are investigated and discussed. SRC columns exhibit a time-dependent relative humidity distribution in a cross section differently from that of reinforced concrete(RC) columns owing to the presence of a inner steel plate, which interferes with the moisture diffusion of concrete. This relative humidity distribution may reduce the drying shrinkage and the drying creep in comparison with RC columns. Therefore it is suggested that the differential moisture distribution should be taken into account in order to reasonably predict column shortening of SRC columns.
Computer graphic where the most useful and effective production methods are used for animation or films has expanded into actors' performance beyond object expression, background expression and special effect. Unlike 2D drawing software focusing on user's sense, 3D mainly depends on hardware performance and software functions. Therefore, for 3D users, learning 3D functions is directly related to new expression, and quick learning and effective representation are keys to productivity growth in animation industry. In line with industrial needs, basic 3D animation software training is provided in school. Unfortunately, however, many problems such as lack of professional instructors, time allocation and education environment prevent various 3D animation software from being taught. Moreover, functional use does not live up to industrial rapid trends. In order to improve effects of software functional education in restricted education fields, this research aims to find out what functions of 3D animation software are used in industries, what are those function used for, and how schools provide 3D animation software training.
Kim, Jai-Min;Kim, Soon-Ae;Yoo, Geun-Chang;Seo, Eun-Sun
Journal of Korean Ophthalmic Optics Society
/
v.8
no.1
/
pp.65-71
/
2003
The corneal epithelium is constantly being shed. The mechanism of corneal desquamation is not fully understood. Apoptosis, programmed cell death, may play a role. Apoptosis can be induced by a number of factors and different mechanisms. The study was performed to examine the apoptotic index induced in human corneal epithelial cells maintained in tissue culture by various apoptotic inducers. Various inducers, recombinant human cytokines($INF{\gamma}$, $TNF{\alpha}$, FASAb), actinomycin D. camptothecin, cycloheximide, dexamethasone and etoposide, were purchased from commercial suppliers. Inducers at manufacturer-recommended concentration were added to the corneal epithelial cells for 48 hours. Cell viability was measured using MTT assay. The cells were then assessed for the level of apoptosis. Morphologic changes and quantification of apoptotic cells were determined and counted under fluorescence microscope after inducers-treated human corneal epithelial (HCE) cells for 48 hours with Hoechst 33342 staining. Annexin V-FITC/PI staining and DePsipher assay. The expression of Fas protein was studied by immunocytochemistry. All inducers induced apoptosis in HCE cells in a dose dependent manner. Actinomycin D. camptothecin and etoposide induced apoptosis at lower than manufacturer-recommended concentration, while cytokines, cycloheximide and dexamethasone induced apoptosis at higher concentrations at the end of 48 hours. All inducers elicited typical apoptotic morphologic changes (chromatin condensation, nucleus fragmentations non-orange-red colored mitochondria) and expresses Fas protein highly. Apoptotic index of HCE cells by these inducers was different from the other cell lines. RNA synthesis inhibitor and topoisomerase inhibitors induced apoptosis at lower concentration than manufacturer-recommended concentration. Cytokines, cycloheximide and dexamethasone were able to produce apoptosis at 10 times higher concentrations. RNA synthesis inhibitor and topoisomerase inhibitors are more sensitive than intracellular receptor-activators in apoptotic induction of HCE cells.
In general, transmission electron microscopy (TEM) is usually used in the investigation of polymer microstructure. Microtoming, solution casting, staining and carbon replica method are frequently introduced to the study of the polymer morphology with TEM, however the sample preparation procedure of those techniques is very difficult, and it takes a long time. The purpose of this study is to develop a new sample preparation technique which is suitable for the investigation of the various shapes and species of polyolefin microstructure by scanning electron microscopy (SEM). By modifying the conventional chemical etching method, we developed a new chemical etching technique and sample preparation procedure that are suitable for SEM study of polymer microstructure. In this study the permanganate etching method is introduced and the optimum etching condition are determined by simply adjusting the etchant formulation, concentration and etching time. This technique has shown good reproducibility and it's morphological results agree well with other works on various types of microstructures such as spherulite characterization of isotatic polypropylene $(\alpha/\beta)$, polyethylene and poly-propylene copolymer characterization, and the study of lamellar growth pattern of unsheared or oriented materials. This technique has also been applied to the industrial fields for characterization of the polyolefin film, automobile products and the others.
This study investigated the development of health promoting high quality Mumalangi Kimchi. Angelica gigas Nakai leaves (AGL) were extracted with water and 70% ethanol, and the extracts tested for their electron donating ability (EDA), nitrite scavenging ability (NSA) and inhibitory effects on MDA and A549 cells. The EDA in 100-1,000 ppm water extracts from AGL ranged from 40 to 80%, but that of the ethanol extracts ranged from 37 to 81%. The NSA increased with increasing AGLconcentration in the extracts and decreasing pH. The NSA of the 1,000 ppm water and ethanol extracts from AGL were 29 and 35%, respectively, at pH 1.2. The inhibition ratios of the water and ethanol extracts from AGL on MDA cell growth were 35 and 32%, while those on A549 cell growth were 27 and 23%, respectively, at 1,000 ppm. After sun drying radishes for 15 hours, for the preparation of Mumalangi, the water contents were higher in summer radishes (39.5%) than fall radishes (32.6%) the color of summer radish also changed to brown. During storage of Mumalangi Kimchi, with the addition of 1-3% AGL, at 20?for 4 weeks, the yeast growth was inhibited. The shelf-life of Mumalangi Kimchi was extended by the addition of AGL. In the sensory evaluation of Mumalangi Kimchi, that with the addition 2% AGL had the highest scores for color, flavor, taste, texture, after taste and overall acceptability. Mumalangi Kimchi with the addition of 2% AGL had significant high scores for both taste and overall acceptability (p.0.05).
Since domestic and foreign platform companies and mobile carriers adopt and use different kinds of smart platforms, developers should develop or convert contents according to each smart platform to provide a single smart content for customers. It takes long time and a lot of money to convert the conventional smart contents in order to serve other smart platforms. For the reason, more attention has been paid on Smart Cross Platform or Hybrid Platform, the core technologies of OSMU(One Source Multi Use) in which, once a program is coded, it can be executed in any platforms regardless of development languages. As a result, PhoneGap and HTML5 based Sencha Touch have been introduced. In this paper, we developed the smart virtual machine, which is built in smart cross platform based smart devices, unlike Android, iOS, Windows Phone devices being dependent of platforms, and helps to download and execute applications, being independent of platforms. the smart virtual machine supports C/C++, and Java language, being differentiated from JVM by sun microsystems that supports only Java language and .NET framework by microsoft that supports only C, C++ and C#. Therefore, it provides contents developers with the environment where they can get a wide range of options in choosing a language and develop smart contents.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.