• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.147-155
• /
• 2013

In this paper structural analysis of underground electrical power cable structures which is excavated below the surface of the earth in the downtown area is carried out considering the effect of construction sequence. There are many various life-line facilities below the surface of the earth in the downtown area. MPDAP was used for finite element analysis of underground electrical power cable structures. Three typical sections are simulated by finite element models. Unbalanced equilibrium problems may be occurred when conventional finite element procedures were used for simulation of tunnel excavation. Therefore equilibrium perturbation concept was applied to solve these problems. The effects of time-dependent deformations in advancing tunnel excavation are considered in the stages of construction sequences as using the load distribution factor. It is shown that values of maximum displacement of both soil and rock surrounding underground electrical power cable structures obtained by our numerical studies are less than allowable values.

• Journal of the Korean Geophysical Society
• /
• v.10 no.1
• /
• pp.27-35
• /
• 2007

There are many risks in constructing tunnel-structure. To prevent these risks from occurring and secure safety, the precise and rapid survey of inside displacement of the tunnel is required. But nowadays the measurement of the crown settlement, convergency, and surface settlement depends on general kinds of method which use total station or level. In the way to provide data about maintaining structure according to recent improvement and progress of measuring technology, 3D laser scanning is used. It solves the problem of reliability in measuring displacement of existing structure, provides material that enables to estimate shape change of structure visually, and makes it possible to deliberate speedy countermeasure. By this three dimensioning it is possible to make efficient use of structure maintenance and field measurement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1854-1863
• /
• 2003

In the recent digital communication systems, the performance of Turbo Code using the mr correction coding depends on the interleaver influencing the free distance determination and the recursive decoding algorithms that is executed in the huh decoder. However, performance depends on the interleaver depth that needs many delays over the reception process. Moreover, turbo code has been blown as the robust coding methods with the confidence over the fading channel. International Telecommunication Union(ITU) has recently adopted it as the standardization of the channel coding over the third generation mobile communications(IMT­2000). Therefore, in this paper, we preposed the interleaver that has the better performance than existing block interleaver, and modified turbo decoder that has the parallel concatenated structure using MAP algorithm. In the real­time voice and video service over third generation mobile communications, the performance of the proposed two methods was analyzed and compared with the existing methods by computer simulation in terms of reduced decoding delay using the variable decoding method over AWGN and fading channels for CDMA environments.

• Journal of the Korea Convergence Society
• /
• v.12 no.9
• /
• pp.161-168
• /
• 2021

As the demand for high speed and high precision increases in the field of machine tool, interest in stiffness and vibration of machine tool is increasing. However, it takes a lot of time to develop a detailed design of machine tool based on experience, and it is difficult to design appropriately. Recently, structural optimization using FEM are increasingly used in machine tool design. But, it is difficult to optimize in consideration of the vibration state of the structure since optimization through stress distribution of a structure is mainly used, In this paper, Static structural analysis, mode analysis, and harmonic analysis using FEM were conducted to optimize the head structure that has the most influence on machining in a 5-axis machine tool. It is proposed a topology optimization analysis method that considers both static stiffness and dynamic stiffness using objective function design.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.2
• /
• pp.87-92
• /
• 2022

Image-based application testing proposes an application testing method via image structure comparison. This test method allows testing on various devices without relying on various types of device operating systems or GUI. Traditional studies required the creation of a tester for each variant in the existing case, because it differs from the correct image for operating system changes, screen animation execution, and resolution changes. The study determined that the screen is the same for variations. The tester compares the underlying structure of the objects in the two images and extracts the regions in which the differences exist in the images, and compares image similarity as characteristic points of the Faster D2-Net. The development of the Faster D2-Net reduced the number of operations and spatial losses compared to the D2-Net, making it suitable for extracting features from application images and reducing test performance time.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.488-505
• /
• 2007

The purposes of this research are twofold; 1) to verify spatial differences of tectonic movement using the spatial distribution of earthquakes, and 2) to infer mechanisms that generate spatial accumulation patterns of earthquakes in the Korean Peninsula. The first part of this sequential paper (Park, 2007) argues that the Korean Peninsula consists of four geostructural regions in which tectonic deformation and consequent geomorphological development patterns are different from each other Since this conclusion has been made by terrain analyses alone, it is necessary to verify this suggestion using other independent geophysical data. Because earthquakes are results of movement and deformation of land masses moving in different directions, the distribution of earthquake epicenters may be used to identify the direction and rates of land mass movement. This paper first analysed the spatial distribution of earthquakes using spatial statistics, and then results were compared with the spatial arrangement of geostructural regions. The spatial distribution of earthquakes in the Korean Peninsula can be summarized as the followings; firstly, the intensity of earthquakes shows only weak spatial dependency, and shows large difference even at adjacent regions. Secondly, the epicenter distribution has a clear spatial accumulation pattern, even though the intensity of earthquake shows a random pattern. Thirdly, the high density area of earthquakes shows a clear 'L' shape, passing through Pyeongannam-do, centered at Pyeongyang, and Hwanghae-do, Seosan and Pohang. The correlation coefficient between the density of earthquakes and distance from geostructral region boundaries is much higher than those between the density of fault lines and distance from tectonic division boundaries. Since fault lines and tectonic divisions in the Korean Peninsula are the results of long-term geological development, there is an apparent scale discrepancy to find significant correlations with earthquakes. This result verifies the research hypothesis that the Korean Peninsula is divided into four geostructral regions in which each has its own moving direction and spatial deformation characteristics. The existence of geostructural regions is also supported by the movement parrerns of land masses estimated from the GPS measurements. This conclusion is expected to provide a new perspective to understand the geomorphological developments and the earthquake occurrences in the Korean Peninsula.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.16-21
• /
• 2012

Recently, an importance of culture industry has been emphasized through an increased income level, spare time and changed values of modern people. And demands of the performance, arts, exhibit are steadily being increased. However the stage equipment depends on foreign manufactures on account of the inactive domestic technical skills. Especially in the lighting direction part, it is essential to control the lighting source and detect the moving line of actors but it generally uses the manual control type and realization of actor's moving line regardless of existing IT-based technologies. Also the system operation of existing sensor-based tracking and detecting technologies depends on the main lighting source of the stage. Therefore, this paper proposed LED lighting control system using the variable FOV and multi sensor-based tracking algorithm, which are possible to efficiently track the stage actors and direct the stage lights. Also we demonstrated the practicality and possibility of realization through the integrated experiment of the proposed system and implementation of the salient hardware, software. Additionally, the usefulness of proposed system was demonstrated using performance simulations and actual measurements of implemented sensor output.

• Journal of Marine Bioscience and Biotechnology
• /
• v.1 no.2
• /
• pp.63-70
• /
• 2006

Natural product compounds are the source of numerous therapeutic agents. The marine environment produces natural products from a variety of structural classes exhibiting activity against numerous disease targets including anticancer agents. Among these, pectenotoxin-2 (PTX-2), which was first identified as a cytotoxic entity in marine sponges, which depolymerizes actin filaments, was found to be highly effective and more potent to activate an intrinsic pathway of apoptosis in p53-deficient tumor cells compared to those with functional p53 both in vitro and in vivo. However, the anti-proliferative mechanism of the compound at non-cytotoxic concentrations has not yet been explored. In the current study, we sought to investigate anti-proliferation and apoptosis of PTX-2 against U937 human leukemic cells and its underlying molecular mechanism. Exposure of U937 cells to PTX-2 resulted in growth inhibition and induction of apoptosis in dose- and time-dependent manner as measured by MTT assay, fluorescent microscopy and flow cytometric analysis. The anti-proliferative effect of PTX-2 was associated with a marked increase in the expression of cyclin-dependent kinase p21 (WAF1/CIP1) mRNA which was tumor suppressor p53-independent. The increase in apoptosis was connected with a time-dependent down-regulation of anti-apoptotic Bcl-XL and inhibitor of apoptosis proteins (IAPs) family such as XIAP and cIAP-2. Though additional studies are needed, these findings suggested that PTX-2-induced inhibition of U937 cells was associated with the induction of apoptotic cell death and the results provided important new insights into the possible molecular mechanisms of the anti-cancer activity of PTX-2.

• Journal of Plant Biotechnology
• /
• v.42 no.2
• /
• pp.117-122
• /
• 2015

Canola is a crop globally used for production of oil and biofuel. Cultivation area and import volume of living modified (LM) canola have been increasing every year. As canola import dependence has reached 100% in Korea, efforts have been made for safety management of LM canola and ecological risk assessment. We developed a set of multiplex PCR method for simultaneous detection of 5 LM canola events (Topas 19/2, Rf3, Ms8, RT73 and T45) approved in Korea. The multiplex PCR assay developed allows amplification of estimated products of 5 LM canolas from event specific primer sets. Primer extension time was skipped for a time-consuming process and two annealing steps (20 cycles at $55^{\circ}C$ and 20 cycles at $60^{\circ}C$) were performed for yielding the best result which was sufficient to distinguish five LM canolas. Our results suggest that multiplex PCR method provides a cost and time-effective approach for LM canola detection.

• Journal of Food Hygiene and Safety
• /
• v.13 no.2
• /
• pp.106-111
• /
• 1998

This study has been focused on both estrogenic and proliferating activity of genistein (GEN) and bisphenol A (BPA). GEN and BPA enhance the proliferation of estrogen-dependent MCF-7 human breast cancer cells at concentrations as low as 100 nM of GEN and 8 ng/ml of BP A achieving similar effect to that of estradiol at 1 nM. Expression of the estrogen responsive gene, pS2 was also induced in MCF-7 cells by treatment with genistein at dose as low as 1 nM and BPA at dose as low as 4 ng/ml. Using 21 day-old ovariectomized nude mice, we examined end-bud formation and mammary gland development after treatment with bisphenol A or genistein. Compared with untreated control, mammary gland development and end-bud formation were significantly increased in mice fed genistein or bisphenol A (p<0.05). Taken together, it is concluded that GEN and BP A can act as an estrogen agonist resulting in cell proliferation and induction of the estrogen responsive pS2 gene in MCF-7 cells in vitro and in athymic mice in vivo, respectively. Therefore, it is suggested that GEN and BP A might modulate human endocrine system and these compounds might be considered as a endocrine modulator at the low levels of doses.