• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.18-18
• /
• 2022

하천 합류부에 있어 수체의 혼합양상을 분석은 고해상도의 자료가 필요하다. 반면에 수질환경 문제와 기존 모니터링 시스템이 고정된 측정 방식으로 이루어지기 때문에 하천 전체의 정보는 저해상도의 결과값은 나타낸다. 또한, 많은 수중 환경 문제가 1차원에서 3차원에 걸쳐 있지만, 대부분의 관측 시스템은 1차원에 머물러 있음을 확인할 수 있다. 이러한 문제를 해결하기 위해서는 보다 발전된 관찰 및 계측이 필요하다. 그에 따른 고해상도의 측정 자료를 얻기 위해서는 측정자가부담을 많이 가지며, 측정할 수 있는 영역이나 시간적으로 제한적이다. 해상도는 낮추되 광범위한 데이터를 취득하기 위해서는 적절한 보간법이 선정되어야 한다. 관련 논문을 검토한 결과, 측정 결과에 따른 2차원 횡단면 분포의 내용이 지배적이었고, 3차원 매핑 및 3차원 분석을 통한 수리학적 정보 획득에 관한 연구는 부족한 실정이였다. 특히 3차원 하천 수질 농도의 연구가 불충분했다. 그에 따라 저해상도 측정결과에서의 예측과 보간법에 대한 시각화를 통해 하천의 전체적인 수리·수질정보를 표기하였다. 각각의 보간법을 비교함으로써 하천 매핑에 있어 IDW, Natual Neighbor, Kriging 기법을 적용하여 시각화된 자료와 정량적 평가를 통해 하천매핑의 정밀성을 향상시켰다. 이를 통해 3차원화된 공간보간 자료를 이용한 하천합류부의 혼합양상을 해석하였다. 3차원 데이터를 활용하는 방법으로 측정 및 모니터링 기술의 중요한 데이터로 활용되며, 이러한 데이터는 유해물질 저감 기술 및 평가 예측 기술의 기초 데이터로 활용되고 있다. 유해화학물질 추정, 호수의 고위험 조류군 계층분석 등 다양한 수생건강 진단기술을 활용할 수 있다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.38-38
• /
• 2022

동해안 지역에서 발생되는 대형 산불의 원인은 건조주의보, 영동지역에서 불어오는 강한 바람, 소나무의 단순림, 임도 유무와 상태 등을 들고 있다. 조사 대상지인 삼척 검봉산 일대는 기존 소나무가 우점하는 곳으로 2001년 복원을 위해 소나무, 곰솔, 굴참나무 등을 조림하였고, 일부는 자연복원을 하였다. 복원 이후 21년 지난 현재 삼척 검봉산 일대 산불피해 복원지역의 식생은 크게 굴참나무-소나무군락, 소나무신갈나무군락, 곰솔-소나무군락으로 나누어지는 것으로 나타났다. 산불피해지 식생 회복은 굴참나무, 소나무, 곰솔 등 조림으로 현재 식생은 산불 발생 이전의 임상으로 회복되고 있다. 특히, 산불의 유형 중 지표화 피해지역은 하층 식생의 피해가 크다. 기존의 소나무는 결실된 종자를 비산하여 치수를 발생시켜 자연복원의 속도를 높이고 굴참나무를 활용한 인공복원은 맹아를 발달시켜 본인의 영역을 확장하는 전략을 지니고 있다. 단, 입지적 환경이 동일하다는 전제 조건에서 숲에서 재생 기작이 진행되는 자연복원보다는 인공복원이 회복시간과 종다양성이 높은 측면에서는 효과적인 것으로 결론을 지을 수 있다. 식생군락을 분류한 결과 굴참나무-소나무군락, 소나무-신갈나무군락, 곰솔소나무군락으로 3개 군락으로 나누어졌다. 인공복원지에 식재한 굴참나무, 소나무, 곰솔은 복원 이후 지속적으로 해당지역의 식생이 우점종으로 자생하고 있는 것으로 나타났으나, 소나무-신갈나무군락의 경우 참나무과 식물인 신갈나무와 굴참나무, 졸참나무가 교목층과 아교목층에 자연유입되고 있어 향후 신갈나무가 우점하는 활엽수림으로 천이 될 것으로 예상된다. 군락의 종다양도지수는 낙엽활엽수가 우점하는 굴참나무-소나무군락이 가장 높게 나타났으며, 침엽수림인 곰솔소나무군락이 가장 낮게 나타났다. 산불피해지 식생은 조림수종에 영향을 크게 받으며, 21년이 지난 현재 산불 이전 임상으로 회복되는 경향을 나타내었다. 향후, 효과적인 복원을 위한 DB구축 및 모니터링자료 마련을 위해 산불피해지에 대한 지속적인 식생조사를 통한 자료구축이 필요하다.

• Solar Energy
• /
• v.10 no.3
• /
• pp.60-65
• /
• 1990

[ $n^+-p^+$ ] InP homojunction solar cells were fabricated by thermal diffusion of sulphur into a $p^+$-InP wafer($p=4{\times}10^{18}cm^{-3}$), and a SiO film($600{\AA}$ thick) was coated on the $n^+$ layer as an antireflection(AR) coating by an e-beam evaporator. The volume of the cells were $5{\times}5{\times}0.3mm^3$. The front contact grids of the cells with 16 finger pattern of which width and space were $20{\mu}m$ and $300{\mu}m$ respectively, were formed by photo-lithography technique. The junction depth of sulphur were as shallow as about 0.4r m We found out the fabricated solar cells that, with increasing the diffusion time, short circuit current densities($J_{sc}$), series resistances($R_s$) and energy conversion efficiencies(${\eta}$) were increased. The cells show good spectral responses in the region of $5,000-9,000{\AA}$. The short circuit current density, the open circuit voltage( $V_{oc}$), the fill factor(F.F) and the energy conversion efficiency of the cell were $13.16mA/cm^2$, 0.38V, 53.74% and 10.1% respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.2
• /
• pp.49-55
• /
• 2001

ZnO films were fabricated on p-type Si(100) wafer ITO glass and quartz glass by the sol-gel process using zinc acetate dihydrate as starting material. A homogeneous and stable solution was prepared by dissolving the zinc acetate dihydrate in a solution of 2-methoxyethanol and monoethanolamine (MEA). ZnO films were deposited by spin-coating at 2800 rpm for 25 s and were dried on a hot plate at $250^{\circ}C$ for 10 min. Crystallization of the films was carried out at $400^{\circ}C$~$800^{\circ}C$ for 1 h in air. X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), UV-vis transmittance spectroscopy, FTIR transmittance spectroscopy and Photoluminescence (PL) spectroscopy measurements have been used to study the structural and optical properties of the films. ZnO films highly oriented along the (002)plane were obtained. In all cases the films were found to be transparent (above 70%) in visible range with a sharp absorption edge at wavelengths of about 380nm, which is very close to the intrinsic band-gap of ZnO(3.2 eV). The low temperature band-edge photoluminescence revealed a complicated multi-line structure in terms of bound exciton complexes and the phonon replicas.

• Korean Journal of Acupuncture
• /
• v.34 no.3
• /
• pp.164-171
• /
• 2017

Objectives : The purpose of this study is to study the effects of acupuncture on Young-gol and Dae-back on night fever and investigate the meridian and collateral aspects of Dong-Si acupuncture through cases of night fever due to Yin deficiency. Methods : Patients have received acupuncture on both sides(Young-gol and Dae-back) at 10 pm. The acupuncture treatment lasted for 15 minutes. Body temperature, pulse, and Numeric Rating Scale(NRS) scores for dryness of mouth were measured for the evaluation. Results : Both patients reported symptomatic reduction including night fever, pulse rate, NRS about dry mouth following the described treatments. The night fever disappeared after acupuncture treatment. The mean of pulse rate changed from 82.6 to 74.8(case 1), from 83.5 to 74.3(case 2). The mean of NRS changed from 4.2 to 1.7(case 1), from 3.3 to 2.4(case 2). Conclusions : In both cases, acupuncture was effective in relieving night fever symptoms. This can be considered from meridian and collateral aspects and the Korean medicine physiological perspective. In the future, systematic and diverse studies related to this will be needed.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.152-157
• /
• 2007

AlGaN/GaN high electron mobility transistors (HEMTs) were fabricated and the effect of ${N_2}O$ plasma on the electrical characteristics of the devices was investigated. The HEMT exposed to ${N_2}O$ plasma formed by 40 W of RF power in a chamber with pressure of 20 mTorr at a temperature of $200^{\circ}C$, exhibited a reduction of gate leakage current from 246 nA to 1.2 pA by 10 seconds treatment. The current between the two isolated active regions reduced from 3 uA to 7 nA and the sheet resistance of the active layer was lowered also. The variations of electrical characteristics for HEMT were occurred within a short time expose of 10 seconds and the successive expose did not influence on the improvements of gate leakage characteristics and conductivity of the active region. The reduced leakage current level was not varied by successive $SiO_2$ deposition and its removal. The transconductnace and drain current of AlGaN/GaN HEMTs were increased also by the expose to the ${N_2}O$ plasma.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.715-723
• /
• 2020

Cross-talk artifacts occur in two adjacent groups of axial imaging of lesions lumbar 4-5 and sacrum 1 in lumbar spine MRI. This causes problems in reading lesions in areas corresponding to the posterior vertebra. In this study, we are going to completely remove the cross-talk artifacts through optimal concatenation TR. The region of interested were measured by averaging them into fat (ROI1), erector spinal muscle(lateral tract: iliocostalis lumborum muscle) (ROI2), erector spinal muscle(lateral tract: longissimus muscle) (ROI3), and spinous process (ROI4). The mean signal intensity (SI) was 163.43 ± 25.08 at C4 for ROI1, ROI 2 and ROI 3 at C6, 67.89 ± 11.75 and 69.99 ± 10.91 and ROI4 at C5, respectively (p<0.000). The mean signal to noise ratio (SNR) was 135.45 ± 35.90, 56.92 ± 15.90, 58.77 ± 15.59, and 54.91 ± 118.95 for SNR 1, 2, 3 and 4 (p<0.000). The contrast-to-noise ratio (CNR) was CNR1 78.52 ± 24.11, CNR2 was 76.67 ± 24.38 and CNR3 was 80.54 ± 26.33 in concatenation 6, respectively (p<0.000). The SNR, CNR, and the most efficient concatenation TR value over time are 6, and it is considered to help reduce cross-talk artifact if this is applied to T1 axial images.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.4
• /
• pp.311-324
• /
• 2014

The Hongjeom formation of the Pyeongan Supergroup in the Munkyeong coalfield mainly consists of metapsammite and metapelites. Metampelites occur as slate preserving chloritoid+chlorite+muscovite and andalusite+biotite+chlorite+muscovite mineral assemblages. Chloritoid and andalusite occur as porphyroblast, and the matrix composed of fine-grained micas. Metamorphic P-T conditions for these mineral assemblages are $510-520^{\circ}C$ and 3.0-3.5kbar based on P-T pseudosection in $MnO-K_2O-FeO-MgO-Al_2O_3-SiO_2-H_2O(MnKFMASH)$ system and isopleth intersections of Fe/(Fe+Mg) ratios in chloritoid and chlorite. The medium temperature and low pressure metamorphism resulted from a higher geothermal gradient ($40-45^{\circ}C/km$) condition than that of burial metamorphism. The youngest (SHRIMP U-Pb age; ca. 327-310 Ma) detrital zircon grains from the Hongjeom formation display oscillatory zoning and relatively high Th/U ratio (0.60-1.12). Based on the previous sedimentary, paleontological, and geochronological studies in the Taebaeksan basin together with results of this study, we suggest that (1) initial deposition of the Hongjeom formation was contemporaneous with a magmatic activity in the provenance, (2) the Pyeongan Supergroup was deposited in an arc-related basin at an active continental margin during the Carboniferous to Permain, and (3) magmatic activities occurred repetitively in relatively short interval in the active continental margin had continuously supplied sediments to the basin.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.13-19
• /
• 2009

A 440MHz wireless and passive surface acoustic wave (SAW) based chemical sensor was developed on a $41^{\circ}YX\;LiNbO_3$ piezoelectric substrate for simultaneous measurement of $CO_2$ gas and relative humidity (RH) using a reflective delay line pattern as the sensor element. The reflective delay line is composed of an interdigital transducer (IDT) and several shorted grating reflectors. A Teflon AF 2400 and a hydrophilic $SiO_2$ layer were used as $CO_2$ and water vapor sensitive films. The coupling of mode (COM) modeling was conducted to determine optimal device parameters prior to fabrication. According to simulation results, the device was fabricated and then wirelessly measured using the network analyzer. The measured reflective coefficient $S_{11}$ in the time domain showed high signal/noise (S/N) ratio, small signal attenuation, and few spurious peaks. In the $CO_2$ and humidity testing, high sensitivity ($2^{\circ}/ppm$ for $CO_2$ detection and $7.45^{\circ}/%$RH for humidity sensing), good linearity and repeatability were observed in the $CO_2$ concentration ranges of $75{\sim}375ppm$ and humidity levels of $20{\sim}80%$RH. Temperature and humidity compensations were also investigated during the sensitivity evaluation process.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.3
• /
• pp.119-126
• /
• 2023

Sarcopenia is not well known enough to be classified as a disease in 2021 in Korea, but it is recognized as a social problem in developed countries that have entered an aging society. The diagnosis of sarcopenia follows the international standard guidelines presented by the European Working Group for Sarcopenia in Older People (EWGSOP) and the d Asian Working Group for Sarcopenia (AWGS). Recently, it is recommended to evaluate muscle function by using physical performance evaluation, walking speed measurement, and standing test in addition to absolute muscle mass as a diagnostic method. As a representative method for measuring muscle mass, the body composition analysis method using DEXA has been formally implemented in clinical practice. In addition, various studies for measuring muscle mass using abdominal images of MRI or CT are being actively conducted. In this paper, we develop an AI image segmentation model based on abdominal images of CT with a relatively short imaging time for the diagnosis of sarcopenia and describe the multicenter validation. We developed an artificial intelligence model using U-Net that can automatically segment muscle, subcutaneous fat, and visceral fat by selecting the L3 region from the CT image. Also, to evaluate the performance of the model, internal verification was performed by calculating the intersection over union (IOU) of the partitioned area, and the results of external verification using data from other hospitals are shown. Based on the verification results, we tried to review and supplement the problems and solutions.