• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.91-106
• /
• 2010

Recently, interest in supply chain management is rising along with the increasing oil prices and traffic congestion. In particular, people started studying the issue, but realized that advantageous strategies for suppliers and retailers are not always advantageous to a carrier. Therefore, in this study the atuhors set up a simulation scenario to understand delivery vehicle routing problems under various inventory policies, namely Economic Order Quantity (EOQ) and Periodic Order Quantity (POQ) and network configurations. First, the authors made a virtual supply chain. Then they analyzed characteristics of delivery vehicle routing under various inventory policies (EOQ and POQ) and network configurations. As a result, the POQ inventory policy decreases the number of vehicles, the number of drivers, and the service time of vehicles. Also, the centralized network increases the load factor of vehicles and decreases the service time of vehicles. In other words, the centralized network and the POQ inventory policy are better for the carrier. These results show a savings of 15,556,806 won ($13,389.10) in a month: a reduction of 17%.

• Current Research on Agriculture and Life Sciences
• /
• v.6
• /
• pp.13-18
• /
• 1988

This experiment was conducted to identify the enzyme treatment time, calcium ion effect, enzyme concentration and leaf position for protoplast isolation. It was also performed to determine the adequate molarity on protoplasts, and to investigate the incubation time, pH, PEG concentration and DMSO effect for protoplast fusion. The results obtained were summarized as follows ; The optimal time of incubation in enzyme solution was 4 hours. And the protoplast releasing time was delayed by $CaCl_2{\cdot}2H_2O$ addition to the enzyme solution compared with no added one. The viability had kept up to above 95% until the 4 hours after digestion. The high viability of the protoplast was preserved more than 16 hours by adding $CaCl_2{\cdot}2H_2O$ to digestion solution. The enzyme concentration had no effect on protoplast yield in range from 1% to 5% and the first or second leaf from the top of the plant produced the highest protoplast yield among the leaf position tested. The purity of healthy protoplast was better in 0.4M and 0.5M sucrose than in others, and the percentage of protoplast aggregation was more 20% to 50% in PEG 6,000 compared with 4,000 and PEG 1,500. Even though the percentage of protoplast aggregation was less increased by 3% to 7% than without DMSO, its treatment was effective to induce binucleated protoplasts.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.966-970
• /
• 2009

경기도 용인시, 오산시와 화성시 지역의 농업용수와 공업용수의 공급원으로 이용되고 있는 신갈호는 현재 유입하천으로부터 미처리된 도시하수, 공장 폐수, 축산 폐수 등의 점오염원 및 도시 지역 불투수층에 쌓여있는 오염물질인 비점오염원이 무분별하게 유입되어 수질이 매우 악화되어 용수로의 사용이 어려운 지경에 달하였으며, 자연정화능력도 감소하는 등 심각하게 오염되었다. 또한 최근에는 신갈호 유역의 개발에 따른 토지이용 변화로 신갈호 유역의 총오염부하량이 증가하고 있는 실정이다. 따라서 본 연구에서는 현재 날로 심각해지는 신갈호 유입하천의 비점오염원 조사를 통해 신갈호 및 유입하천의 기초데이터의 확충 및 현황 파악을 하고자 하였다. 본 연구에서는 강우 시 신갈호로 유입되는 3개의 유입지천인 신갈천(SG), 지곡천(JK), 공세천(KS)에서 비점오염부하량을 산정함으로써 강우 시 호소로 유입되는 총오염부하량 및 비점오부하량의 비율을 알아보고자 하였다. 강우사상에 따른 총 오염물질 부하량은 EMC 농도를 구한 후 총 유출유량을 곱하고 총 강우지속시간을 곱하여 산정하였다. 조사결과 강우기에 있어서 거의 모든 항목의 농도는 평수기보다 매우 높은 수치를 나타냈다. 특히 SS 농도는 토사의 하천유입으로 인해 다른인자에 비해 큰 변동폭을 나타내었으며, COD와 T-P는 토양입자에 흡착되어 함께 이동하기 때문에 SS와 밀접한 관계를 가졌다. 강우시의 각 유입하천별 오염부하 기여율은 SG의 경우 SS 74.1%, BOD 64.4%, COD 65.7%, T-N 63.8%, T-P 73.8%를 나타내었다. JK의 경우 SS 25.4%, BOD 31.5%, COD 30.5%, T-N 32.5%, T-P 24.2% 였고, KS의 경우 SS 0.5%, BOD 4.1%, COD 3.8%, T-N 3.7%, T-P 2.0%를 나타내었다. 강우시의 각 유입하천별 오염부하 기여율을 평수기때의 오염부하 기여율과 비교하였다. 비교결과 SS의 경우는 SG가 강우시에 74%, 평수기에 83%, BOD의 경우는 강우시 64%, 평수기 80%, T-N은 강우시 64%, 평수기에 84%, T-P의 경우는 강우시 74%, 평수기에 82%로 모든 항목에서 평수기에 신갈천이 신갈호의 오염부하에 미치는 영향이 큰 것으로 나타났는데, 이는 강우시 지곡천의 기여율이 평수기 보다 상대적으로 높아지기 때문인 것으로 판단된다.

• Korean Journal Plant Pathology
• /
• v.1 no.2
• /
• pp.122-127
• /
• 1985

Three rice cultivars, Aichi-asahi, Toyotama and Yamabiko, possessing a resistance gene $Pi-\alpha$ were evaluated for penetration, hyphal growth in the leaf epidermis and lesion formation using 6 isolates of Pyricularia oryzae by treating pre- and post disposing temperatures of $23/15^{\circ}C\;and\;29/21^{\circ}C$ (day/night) regimes, respectively. Percent penetration of the fungus was higher on the seedlings disposed at $29/21^{\circ}C$ regime and more lesions were formed at 7 days after inoculation than at $23/15^{\circ}C$ regime. Degree of hyphal growth and number of host cells with hyphal growth were remarkably increased from 72 to 96 hr after inoculation at $29/21^{\circ}C$ regime. However, lesion formation on the seedlings disposed at $23/15^{\circ}C$ regime was delayed, possibly as a result of the suppressed hyphal growth until 96 hr after inoculation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.191-191
• /
• 2008

강유전성 세라믹스 재료로써는 PZT계열의 세라믹재료가 널리 쓰이고 있다. 이는 우수한 유전 및 압전특성을 가지고 있으나, PbO을 다량 함유하고 있어 $1000^{\circ}C$이상에서 PbO가 급격하게 휘발되는 성질 때문에 조성의 변동이 생겨 재현성이 어려우며 이를 방지하기 위하여 PbO를 과잉 첨가시키기 때문에 PbO휘발로 인한 강한 독성이 인체에 유해하고, 비환경 친화적인 물질로 최근에는 환경문제가 대두됨에 따라 대체 또는 보완 할 수 있는 방안에 검토되고 있다. 본 연구는 그 해결책의 한 방안으로 압전특성이 우수한 $(Pb_{0.94}Sr_{0.06})[(Ni_{1/2}W_{1/2})_{0.02}(Mn_{1/3}Nb_{2/3})_{0.07}(Zr_{0.51}Ti_{0.49})_{0.91}]O_3$계 조성을 설계하고 Glass frit(0~1.1 wt%)를 소량 첨가하여 액상 소결 특성을 부여하고 $1000^{\circ}C$ 이하의 저온에서 소결하여 유전 및 압전 특성을 평가하였다. 실험방법은 일반적인 세라믹스 제조공정으로 24시간 ball milling하고 $850^{\circ}C$에서 2시간 하소 후 Glass frit를 소결조제로 소랑 첨가하여 $1000^{\circ}C$ 이하 온도에서 소결을 진행하여 각 소결온도에 따른 유전 및 압전 특성을 평가하였다. 최종 소결된 시편의 밀도와 수축율을 분석하여 최적의 소결온도를 확립하였으며 XRD분석을 통해 perovskite구조를 확인하고 미세구조확인을 위해 SEM으로 관찰하였다. 압전 특성을 평가하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.1-7
• /
• 2018

Suspension bridge cables made of high strength steel wires require periodical maintenance in accordance with the axial force of cable-band bolts, since the bolts in suspension bridges can undergo tension decrease due to creep of cable wires, bolt relaxation, load fluctuation, and cable re-arrangement, etc. Consequently, this study is aimed at investigating and subsequently evaluating the critical factors with respect to the bolt tension-decrease phenomenon in SR suspension bridge in Korea, based on field monitoring, theoretical studies, and field record management works. From the observation, it is interesting to note that the decrease in the bolt tension force is typically accompanied by plastic deformation of the zinc plating layers in the cable wires. In addition, a framework corresponding to generic methodologies to characterize the deformation in terms of the bolt tension-decrease and long-term history management has been developed in this exploratory study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.542-542
• /
• 2015

비점오염원은 기상조건과 토지이용에 따라 시간에 따른 오염부하량의 변동폭이 크게 발생하며, 강우초기에 오염물질의 농도가 크게 나타난다. MFFn은 강우지속시간에 따라 다양하게 변화하는 오염물질의 부하량과 유출량을 특정시점에서 강우유출율과 오염물질 유출율을 계산할 수 있으며, 강우가 시작될 때 0, 종료될 때 1의 값을 나타내며, 1보다 크면 초기세척이 있음을 나타낸다. 예를 들면 MFF20에서 평균값이 2.5이면 초기우수유출수의 부피 20%에 오염물질 부하량의 부피 50%를 포함하는 것을 의미한다. 본 연구에서는 논에서의 초기세척비율 정량화하기 위해 영산강수계 논지역(이하, 학야지구)과 섬진강수계 논지역(이하, 적성지구) 각 1개유역을 선정하여 2009년부터 2012년까지 수문 및 수질 모니터링을 수행하였다. 유역면적은 학야지구는 13.69 ha 이며, 적성지구는 8.06ha 이다. 두 지역 모두 외부유입이 없으며, 배수로가 구조물화 되어 있어 관측이 용이한 지점이다. 논에서 강우시유출되는 오염물질을 산정하기 위해서 배수로 말단에 압력식 수위계와 자동채수기를 설치하여 일정간격으로 관측하였으며, 수위별 유량관측을 통해 수위-유량관계곡선식을 산정 후 유량으로 환산하였다. 채취된 수질은 수질공정시험법을 통해 BOD, COD, TOC, T-N, T-P, SS를 분석하였으며, 관측된 유량과 수질자료를 이용하여 부하량을 산정하고, MFFn을 이용하여 초기세척비율을 정량화 하였다. BOD COD, TOC, T-N, T-P, SS 의 논 초기세척비율은 n 값이 10% 때 중앙값이 각각 1.3, 1.18, 1.13, 1.2, 1.13, 1.1 였으며, 13%, 11.8%, 11.3%, 12%, 11.3%, 11% 가 유출되는 것으로 나타났으며, n 값이 20%일 때 1.3, 1.1, 1.1, 1.25, 1.2, 1.2 이였으며, 26%, 22%, 22%, 25%, 24%. 24%가 유출되는 것으로 나타났다. n 값이 30%일 때 1.25, 1.0, 1.0, 1.25, 1.13, 1.3 였으며, 37.5%, 30%, 30%, 37.5%, 33.9%, 39%가 유출되는 것으로 나타났다.

• Journal of Korea Port Economic Association
• /
• v.37 no.2
• /
• pp.1-17
• /
• 2021

Private investment projects have the characteristic of generating profits for a long period of 30 to 40 years, and fluctuations in profits and costs occur over time, so the interaction of variables over time rather than statistical models or discounted cash flows If the system dynamics technique, which enables simulation of the system, is used, it is considered that meaningful simulation results can be derived for internal and external variables. In other words, by establishing a financial feasibility comparison/verification model based on system dynamics for private investment projects in the port sector that have not been attempted before, we compare the differences with the existing cash flow discount method, macroeconomic factors, operating period, social discount rate We will conduct a differentiated study that has not been tried before by simulating how the interrelationships of such variables affect the change in financial performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.1
• /
• pp.77-82
• /
• 2023

Multi-cloud rendering has been attracting attention recently as the computational load of rendering fluctuates over time and each rendering process can be performed independently. However, it is challenging in multi-cloud rendering to deliver large amounts of input data instantly with consistency constraints. In this paper, we develop a new distributed file system for multi-cloud rendering. In our file system, a local machine maintains a file server that manages versions of rendering input files, and each cloud node maintains a rendering cache manager, which performs distributed cooperative caching by considering file versions. Measurement studies with rendering workloads show that the proposed file system performs better than NFS and the uploading schemes by 745% and 56%, respectively, in terms of I/O throughput and execution time.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.3
• /
• pp.128-137
• /
• 2013

Due to the global warming and air pollution, interest in renewable energies has increased in recent years. In particular, the crisis of the depletion of fossil energy resources in the near future has accelerated the renewable energy technologies. Among the renewable energy resources, oceans covering almost three-fourths of earth's surface have an enormous amount of energy. For this reason, various approaches have been made to harness the tremendous energy potential. In order to achieve two purposes: to improve harbor water quality and to use wave energy, this study proposed a sea water exchange structure applying an Oscillating Water Column (OWC) wave generation system that utilizes the air flow velocity induced by the vertical motion of water column in the air chamber as a driving force of turbine. In particular, the airflow velocity in the air chamber was estimated from the time variations of water surface profile computed by using 3D-NIT model based on the 3-dimensional irregular numerical wave tank. The relationship of the frequency spectrums between the computed airflow velocities and the incident waves was analyzed. This study also discussed the characteristics of frequency spectrums in the air chamber according to the presence of the structure, wave deformations by the structure, and the power of the water and air flows were also investigated. It is found that the phase difference exists in the time series data of water level fluctuations and air flow in the air chamber and the air flow power is superior to the fluid flow power.