• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.103-112
• /
• 2012

This research introduces a trip generation model reflecting time-series effects derived from a panel analysis with the data collected from the national household trip surveys conducted in 1996, 2002 and 2006. The existing methods are unable to reflect time-series effects from the change of socioeconomic conditions because the parameters applied to the model were basically from the base year of study - the parameter values were unchanged. This study proposes a new trip generation model developed through a panel analysis performed with the data collected from the last three national household trip surveys. From the results, it was found that the number of school trips increases and that the number of shopping trips decreases as time passes. The results showed that there are time-series effects affecting in trip generation.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.4
• /
• pp.1-9
• /
• 2015

According to national regulations and its commentary, such as Rivers Design Criteria & Commentary (KWRA, 2009), Foundation Structure Guideline and its Commentary(MLTM, 2014 and KGS, 2009), the integrity evaluation of river levee includes slope stability evaluation of both riverside/protected low-land and piping stability evaluation with respect to foundation and levee body along with water level conditions. In this case the design hydro-graph can be the most important input factor for the integrity evaluation, however it is fact that the national regulations do not provide any proper determination methods regarding hydro-graph. The authors thus executed an integrity evaluation of sluice gate in levee by changing each hydro-graph factor, including rising ordinary water level, lasting flood water level, falling water level, and flood frequency, in order to suggest a determination method of reasonable hydro-graph. As a result, the authors suggested that at least over 57 hours of rising ordinary water level and over 53 hours of lasting flood water level should be considered for the design hydro-graph of sluice gate in levee at Mun-san-jae.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.28-28
• /
• 2003

한국천문연구원이 개발한 iRTK(inverted Real Time Kinemtic) 시스템의 성능을 분석하고 개선방향에 대해 논의하였다. 제안하는 iRTK 시스템은 기존의 실시간 고정밀 측위기법인 RTK와 측위방법과 적용범위 면에서 유사하지만, 중앙에서 일괄적으로 사용자의 위치를 계산하고 유무선 인터넷을 이용하므로 통신범위에 제약을 받지 않는 장점이 있다. iRTK 시스템의 성능분석은 소요시간, 성공률, 정확도를 판단기준으로 하여 이루어졌으며 측정점에서는 중저가의 GPS 수신기를 사용하였다. 분석결과 기준점과의 기선거리 5km 이내에서 1-3m 수준의 측위정밀도를 얻을 수 있었으며, 측위성공률은 최적의 측정시간을 이용할 경우 약 90% 수준이었다. 이를 통해 iRTK 시스템의 적용가능 분야를 살펴보고 적용범위와 정밀도 개선을 위한 몇 가지 개선사항을 검토하였다. 이 중 VRS(Virtual Reference System)는 iRTK 시스템의 성능을 개선하고 단점을 보완할 수 있는 대안으로 검토되었으며, iRTK+VRS 시스템 구축의 가능성에 대해 논의하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.617-624
• /
• 2008

In general, RTK-GPS(Real Time Kinematic GPS) based on the single reference station is able to determinate the high accurate position of rover on the spot using error correction information of transmitted carrier phase from the base station via wireless modem. However, single reference station method has some weak points to decrease positioning accuracy because it must be obtained carrier phase from the each satellite continuously, allowed to transmit without obstacle and limited to short base line distance between base and rover station. This paper aims to attempt network based GPS carrier phase differential positioning using three multi reference stations to overcome the method of single reference station and RTK network is realized by real time monitoring program with Visual C++. The optimum error correction value of three multi reference stations by RTK networking is selected automatically to correct the position of rover station. In this paper, this algorithm is applied to determine sea water level using GPS buoy, and the accuracy results of water level change were analyzed and compared with each other using single and multi reference stations.

• Radiation Oncology Journal
• /
• v.27 no.2
• /
• pp.91-102
• /
• 2009

Purpose: To compare the accuracy and efficacy of EDR2 film, a 2D ionization chamber array (MatriXX) and an amorphous silicon electronic portal imaging device (EPID) in the pre-treatment QA of IMRT. Materials and Methods: Fluence patterns, shaped as a wedge with 10 steps (segments) by a multi-leaf collimator (MLC), of reference and test IMRT fields were measured using EDR2 film, the MatriXX, and EPID. Test fields were designed to simulate leaf positioning errors. The absolute dose at a point in each step of the reference fields was measured in a water phantom with an ionization chamber and was compared to the dose obtained with the use of EDR2 film, the MatriXX and EPID. For qualitative analysis, all measured fluence patterns of both reference and test fields were compared with calculated dose maps from a radiation treatment planning system (Pinnacle, Philips, USA) using profiles and $\gamma$ evaluation with 3%/3 mm and 2%/2 mm criteria. By measurement of the time to perform QA, we compared the workload of EDR2 film, the MatriXX and EPID. Results: The percent absolute dose difference between the measured and ionization chamber dose was within 1% for the EPID, 2% for the MatriXX and 3% for EDR2 film. The percentage of pixels with $\gamma$%>1 for the 3%/3 mm and 2%/2 mm criteria was within 2% for use of both EDR2 film and the EPID. However, differences for the use of the MatriXX were seen with a maximum difference as great as 5.94% with the 2%/2 mm criteria. For the test fields, EDR2 film and EPID could detect leaf-positioning errors on the order of -3 mm and -2 mm, respectively. However it was difficult to differentiate leaf-positioning errors with the MatriXX due to its poor resolution. The approximate time to perform QA was 110 minutes for the use of EDR2 film, 80 minutes for the use of the MatriXX and approximately 55 minutes for the use of the EPID. Conclusion: This study has evaluated the accuracy and efficacy of EDR2 film, the MatriXX and EPID in the pre-treatment verification of IMRT. EDR2 film and the EPID showed better performance for accuracy, while the use of the MatriXX significantly reduced measurement and analysis times. We propose practical and useful methods to establish an effective QA system in a clinical environment.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.465-470
• /
• 1996

본 연구는 원자로 RPV(Reactor Pressure Vessel)를 두 개의 이상적인 입체 구조물 즉, 원통면과 반구로 나누어, 원통면에서의 충격위치를 검출할 수 있는 알고리즘을 제안하고 그 효용성을 고찰하는데 있다. 현재 사용중인 원전내네 금속파편 감시계통(LPMS : Loose Parts Monitoring System)의 경우 충격신호를 레코더에 저장하고 전문가를 통해 데이터베이스화된 기준신호와 비교 분석하는 Off-line분석방법을 사용해 왔다. 그리나 이러한 방법은 많은 소요시간을 가지므로 손상잠재성이 큰 경우 즉각적인 대처를 할 수가 없다는 단점을 가진다. 따라서 본 논문에서는 이러한 방법을 지양하고 센서로부터 얻은 충격신호를 분석컴퓨터에 입력하여 즉각적으로 충격위치를 찾을 수 있는 On-line분석방법을 제안함에 있어, 기초적 연구로서 원통면에서의 충격위치 검출방법을 제시하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.57-57
• /
• 2012

피부염 증상 완화특성을 갖는 힐링섬유소재 제조를 연구하였다. 면소재, 폴리에스테스/나일론 소재에 피부염 증상완화특성이 있다고 알려진 기능성물질을 바인더, 수지 등의 혼합물 페이스트로 만들어 스크린프린팅법을 사용하여 실험을 시도하였다. 제조한 힐링섬유시편소재의 항균특성은 면소재의 경우 99.9% 의 우수한 항균특성을 나타냈다. 암모니아가스의 소취성능은 시간경과에 따라 최대 68%의 소취율을 보였다. 타소재와의 오염견뢰도는 평균 4.5 ~ 5등급, 변퇴세탁견뢰도는 5등급, 마찰견뢰도는 3 ~ 4.5 등급, 일광견뢰도는 5등급을 나타냈다. 의약품 등의 독성시험기준에 따른 힐링소재의 피부자극성을 평가하기 위해 NZW토끼의 피부에 24시간 동안 부착한 후 72시간 동안 사망률, 일반증상, 체중변화 및 피부자극성을 시험한 결과 사망토끼는 관찰되지 않았고, 모든 시험동물에서 특이할 만한 이상증상은 관찰되지 않았다. 체중측정결과 모든 동물에서 정상적인 체중증가를 보였다. 시험소재의 피부자극성을 관찰한 결과 피부자극성이 관찰되지 않아 비자극성(None Irritant)섬유소재로 판단되어 피부염증상완화 특성을 갖는 힐링섬유소재 제조의 실용화 가능성을 연구하였다.

• The Journal of Engineering Geology
• /
• v.13 no.1
• /
• pp.17-27
• /
• 2003

In this study, a phenomenon of saltwater intrusion was monitored under various conditions regarding recharge and pumping rate using time domain reflectometry for a laboratory scale unconfined aquifer to verify the basic theory behind seawater intrusion and to investigate movement of salt-freshwater interface in accordance with the ratio of pumping and recharge rate. Results showed that a thick mixing zone was formed at the boundary instead of a sharp salt-freshwater interface that was assumed by Ghyben and Herzberg who derived an equation relating the water table depth $(H_f)$ to the depth to the interface $(H_s)$. Therefore our experimental results did not agree with the calculated values obtained from the Ghyben and Herzberg equation. Position of interface which was adopted as 0.5 g/L isochlor moved rapidly as the Pumping rate $(Q_p)$ increased for a given recharge rate $(Q_r)$. In addition, interface movement was found to be about 7 times the ratio of $Q_p/Q_r$ in our experimental condition. This indicates that Pumping rate becomes an important factor controlling the seawater intrusion in coastal aquifer.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.5
• /
• pp.142-151
• /
• 2007

The rock excavation work on the sea is planned as underwater process if the elevation of the rock is lower than the M.S.L.(Mean Sea Level). However, in case of West and South sea which are largely different between the rise and fall of the tide, the earth work can be performed on the ground while the work surface is exposed above the sea according to the tide cycle. Thus, it may a good substitute to make up for shortcomings of underwater construction works such as safety problems of workers, loss of efficiency and increasement of construction costs. But the difference between the height of the rock excavation surface and the water surface changed by the tide makes the exposure time of work surface, that is the possible working hours be changed. Also, it may cause the changes of construction cost. Thus, this study analyzes the economical efficiency of the construction method using the difference between the rise and fall of the tide in comparison with the construction method which is performed under the sea, and it also suggests the way to analyze the economical working hours by estimating the possible working hours on the ground. We also try to find out the application possibility of the way like the rock excavation work on the sea using the difference between rise and fall of the tide.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.289-291
• /
• 2003

IP멀티캐스트가 현재 보편적 서비스로 사용되지 못하는 한계로 인하여 그 대안으로 응용 계층 멀티캐스트 기법들이 제안되고 있다. 기존의 응용 계층 멀티캐스트의 성능 분석 기준으로 네트워크 자원의 효율적 사용면을 고려하여 스트레스, 스트레치와 전송 트리 관리 비용등이 사용되었다. 그러나, 응용 계층 멀티캐스트는 데이터의 전송이 참가자인 종단 시스템에 의해 이루어지고, 종단 시스템은 범용 장비로서 데이터 전달에 최적화된 성능을 갖지 못한다. 따라서, 데이터 전달을 위해 종단 시스템에서의 처리 지연이 발생하고 이로 인한 종단간 데이터 전송 지연에 영향을 끼치게 된다. 본 논문에서는 종단 시스템에서의 데이터 전달을 위한 전달 지연 시간을 모델링 하고, 대표적 다대다 응용 계층 멀티캐스트 기법인 End­system Multicast와 NICE에 대하여 종단 시스템에서 발생하는 처리 지연 시간이 전체 참가자간의 데이터 전송 지연 시간에 미치는 영향을 분석한 결과를 기술한다.