• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.94-104
• /
• 2010

The capacity of highway is restricted and traffic congestion is caused by increasing traffic demand. Also, greenhouse gases are increased by traffic congestion. CDM (Clean Development Mechanism) is an idea of interest to reduce greenhouse gases. However, CDM's cases applied in traffic field are rare. Thus, it is necessary that methodology to reduce greenhouse gas should be developed and applied to CDM. A methodology for identifying greenhouse gas emissions was developed in this paper. This methodology was developed on the basis of baseline methodology registered at UN. Travel time and speed in the conventional traffic condition and in the automated traffic condition are compared by BPR function. The calculated speed applied to emission factor equation and then $CO_2$ emissions was calculated. A simulation was executed to evaluate the validity of the developed methodology. In the result, advanced vehicle's $CO_2$ emissions are more than conventional vehicle's $CO_2$ emissions in the stable flow condition. However, advanced vehicle's $CO_2$ emissions are less than conventional vehicle's $CO_2$ emissions in the unstable flow condition. It is assure that capacity of highway is enhanced and efficiency of highway is improved by adopting advanced safety vehicle in the smart road.

• Journal of Korean Society of Transportation
• /
• v.16 no.4
• /
• pp.99-112
• /
• 1998

국가경제의 기반시설인 지역간 고속도로와는 달리 도시고속도로는 도시내 교통을 담당하는 교통시설로서 대부분의 도시에서 건설중이거나 운용 중에 있다. 연속류 도로라는 시설측면을 지역간 고속도로와 비슷하나 이용주체, 차량구성비, 정시성, 제한속도 등 그 성격에는 다소 차이가 있을 것으로 판단된다. 이런 이유에서 현재 도시고속도로의 계획이나 운영에 대한 지침이 지역간 고속도로의 계획 및 운영에 대한 지침과 동일시 되고 있다는 점은 불합리한 것으로 판단된다. 그러므로, 본 연구에서는 도시고속도로의 계획과 운영에 대한 지침을 마련하기 위해 현재 운영중인 대구신천대로를 대상으로 교통류특성 등 기초적 연구를 수행하였다. 연구결과를 간략하게 나타내면 다음과 같다. . 교통류 모형분석에서 기존의 Greenshield 모형이 설명력 90%이상을 나타냈다. . 승용차환산계수 분석에서 중형차량이 1.16, 대형차량이 1.47로 분석되었다. . 용량분석에서 최대관측교통량은 4,684pcphpl, 차두시간분석은 2,432pcphpl, 교통류 모형에서는 2,422pcphpl로 분석되어, 대구신천대로의 서비스용량은 2,300pcphpl에 가까운 것으로 판단되며, 차로폭, 측방여유폭에 따른 보정으로 이상적 조건에서의 용량은 약 2,400pcphpl로 분석되었다. 이 결과는 도시고속도로가 지역간 고속도로의 기본교통용량 2,200pcphpl보다 약 200대 정도 높을 것으로 추정된다.

• Proceedings of the KOR-KST Conference
• /
• 1996.02a
• /
• pp.29-58
• /
• 1996

현재 서울은 교통사고문제, 교통혼잡문제와 자동차로부터 배출되는 유해가스에 의한 대기환경오염문제를 갖고 있다. 본 논문의 목적은 대기환경오염을 악화시키는 자동차의 주된 배출오염가스인 일산화탄소, 탄화수소 및 질소화합물량을 교차로 교통량을 중심으로 어떻게 계산하는가에 있다. 연구의 대상지역은 서울시의 송파구 교차로들과 도심지역의 링크들을 선택하였다. 그리고 교통량, 지체시간, 링크길이, 정지회수, 운행속도, 주행속도 등을 고려하여, 제작차 배출가스 허용기준, 총량기준, 불량차 기준, 속도기준 등에 의한 계수산정 및 TRAF-NETSIM에 의한 시뮬레이션을 통하여 일정 도로상의 제한된 범위내의 배출량 산출을 시도하였다. 본 연구의 결과에 의하면 첫째, 어느 방법이든 실제배출량의 정확한 값을 표현 할 수는 없는 것이고, 단지 상대적인 비교에 의하면 배출가스량의 수준을 추정 할 수 있었다. 또한, 시뮬레이션 배출율표를 우리 현실에 맞는 자료에 의해 수정할 수 있다면, 그 결과는 실제량에 보다 근접할 수 있을 것이다. 둘째, 서울도로의 현재 혼잡상태에서 속도의 저감에 배출량이 민감한 반응을 보이고 있다는 사실이다. 셋째, 교통량변화에 따른 배출량의 변화가 일산화탄소에서 가장 심하게 나타남을 알 수 있었고, 신호운영상의 옵셋값이 잘못 설정되면 탄화수소는 35%, 일산화탄소는 40%, 질소산화물은 75%까지 초과발생할 수 있으며, 유해배출가스량을 최소화시키는 측면에서의 신호최적화를 위해서는 현재의 Stop Penalty는 상향 조정되어야 함이 밝혀졌다. 앞으로는 자동차로 인한 대기환경오염 농도의 저감을 위해서는 도로별 자동차 유해가스 배출 총량규제 방안도 고려해 볼 가치가 있으며, 이를 위해 환경공학과 교통공학의 다학제적 공동연구가 지속적으로 필요하며 교통정책에 반영되어야 할 것이다.분석, 리용수 학모형대이십일세기상해항공운량진행예측, 제출발전상해항공운수적전 략목표급발전중점. 예측2020년 상해항공항총객운탄토량4300만인/년, 화운량달120만돈; 2050년객운량장달18150만인차/년, 화운량518만돈. 사, 발전상해민항기출경제정책, 제출위료$\ll$진흥상해, 개발포동, 복무전국, 면향세계$\gg$ 화도이십일세기중기국민경제달도중등발달국가수 평굉관전략목표적실현, 제료필수재지도사상상파교통운수진정방도전략 산업지위, 환응재관리체제상채취과단유효적개혁조시, 재기출경제정책 상급여대력부지. 오, 전략목표, 위파상해건설성위태평양서안최대적경제, 김융, 무역적중심, 요구상해항공항성위화동지구통향세계각지항선망출발참, 구성대외개방선면축심, 실현국제항선적함접화국내항반적전항, 형성다축심복사식항선망; 가강기장건설, 개피포동제이국제기장건설, 괄응포동개발경제발전적수요. 부화개시일은 각 5월 26일과 5월 22일이었다. 11. 6월 중순에 애벌레를 대상으로 처리한 Phenthoate EC가 96.38%의 방제가로 약효가 가장 우수하였고 3월중순 및 4월중순 월동후 암컷을 대상으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase i

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.3
• /
• pp.215-222
• /
• 2022

The purpose of air traffic flow management is to balance demand and capacity in the national airspace, and its performance relies on an accurate capacity prediction of the airport or airspace. This paper developed a regression model that predicts the number of aircraft actually departing and arriving in a terminal maneuvering area. The regression model is based on a boosting ensemble learning algorithm that learns past aircraft operational data such as time, weather, scheduled demand, and unfulfilled demand at a specific airport in the terminal maneuvering area. The developed model was tested using historical departure and arrival flight data at Incheon International Airport, and the coefficient of determination is greater than 0.95. Also, the capacity of the terminal maneuvering area of interest is implicitly predicted by using the model.

• Journal of Korean Society of Transportation
• /
• v.36 no.2
• /
• pp.155-168
• /
• 2018

In this study, we studied the directional pattern of entering the intersection from the intersection upstream link prior to predicting short future (such as 5 or 10 minutes) intersection direction traffic volume on the interrupted flow, and examined the possibility of traffic volume prediction using traffic assignment model. The analysis method of this study is to investigate the similarity of patterns by performing cluster analysis with the ratio of traffic volume by intersection direction divided by 2 hours using taxi DTG (Digital Tachograph) data (1 week). Also, for linking with the result of the traffic assignment model, this study compares the impact area of 5 minutes or 10 minutes from the center of the intersection with the analysis result of taxi DTG data. To do this, we have developed an algorithm to set the impact area of intersection, using the taxi DTG data and traffic assignment model. As a result of the analysis, the intersection entry pattern of the taxi is grouped into 12, and the Cubic Clustering Criterion indicating the confidence level of clustering is 6.92. As a result of correlation analysis with the impact area of the traffic assignment model, the correlation coefficient for the impact area of 5 minutes was analyzed as 0.86, and significant results were obtained. However, it was analyzed that the correlation coefficient is slightly lowered to 0.69 in the impact area of 10 minutes from the center of the intersection, but this was due to insufficient accuracy of O/D (Origin/Destination) travel and network data. In future, if accuracy of traffic network and accuracy of O/D traffic by time are improved, it is expected that it will be able to utilize traffic volume data calculated from traffic assignment model when controlling traffic signals at intersections.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.41-53
• /
• 2009

For 5 years and 6 months, ranging from January 2003 to June 2008, SPSS 12.0 Statistical Program was used to analyze the overall analysis, analysis of center line encroachment, analysis of signal violations, analysis of drinking while intoxicated, analysis of driving without license, analysis of two-wheel vehicle, analysis of pedestrian, analysis of safety equipment, analysis of traffic publicity or education and automobile registration accounts, and casualty of traffic accidents that are determined as having statistical implication based on the statistics available from the policy to take a look at traffic accident in the Daejeon area, and there were some meaningful results. With the proof that there is a certain level of ratio for the correlations between traffic control and traffic accident that the effect of traffic control has shown with certain time interval. The relationship of traffic control and the casualty of traffic accident has very low coefficient of correlations that it is not statistically noticeable that traffic control of the police has almost no effect in preventing traffic accident. This is a display of the fact that the conversion of direction for traffic safety measure undertaken to this point is rather urgent that there is a dire need of establishing the effective alternatives.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.4
• /
• pp.323-330
• /
• 2012

Manila Bay is home to the Port of Manila with three harbors: North Harbor, South Harbor and MICT(Manila International container Terminal). There is an adjacent fishing port to the north and another port across the Bay, the Limao Port. This study focuses on the volume of traffic movement in the Bay area taken from Manila VTMS raw data of the arrival and departure movements only. It is a two-year period of study of 2010 and 2011 traffic volume. It divides the data according to their numbers; to their sizes measured in gross tons; to the time of vessels' movements, whether daytime or night-time; and to each voyage trade: domestic or foreign. Quantitative values are calculated from the raw data based on the whole population of the two-year period. The results are illustrated by tables and graphs. Statistical measures are applied to determine the spread and frequencies of the data and test any significance from the hypotheses. These are shown in the tabulated form and interpreted to give a better picture of the frequency and volume of traffic. In the end, a summary is offered where it is hoped that this paper will propel further studies of improving the safety behavior in the premier port of the country.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.151-159
• /
• 2008

Performances of retroreflectivity vary place to place, according to traffic volumes and time lengths after striping, depending on pavement marking materials and colors. The present paper uses the nation wide data of retroreflectivity, which has been collected from freeways and then tries to develop the regression curve setting traffic volume and service life as independent variables and retroreflectivities as dependent variables. The DB system includes two year's measurement in $2005{\sim}2006$ over Korean freeway pavement marking at an interval of three months for the period. The mobile measurement system, a laserlux, was employed for the purpose. The DB has provided a lot of information about materials and performance of the specific pavement marking such as geometric features, traffic volumes, material characteristics and the installation date. This study provides the comparison of pavement marking performances under diversified conditions. Based on accumulated pavement marking performances, this study provides performance curves based on the diversified factors. The goal of the retroreflectivity modeling is to develop equations that can be used to estimate an average retroreflectivity of pavement markings as a function time since application and traffic volume. After representing the variation of retroreflectivities and estimating regression curves by linear, exponential, logarithmic and power function, the regression curve which had the highest coefficient of determination and the value similar to the last field measurement was regarded as the retroreflectivity decay model. As a result of verification, the decay model showed the signification within the 90% confidence level and especially showed the clear relation with field data according to increase of cumulative vehicle exposure. Accordingly, these models can be used to determine service lives, retroreflectivity degradation rates, and retroreflectivity of new markings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4580-4587
• /
• 2014

This study provides an improved transportation mode choice models applicable to the Busan-Ulsan Metropolitan area by scrutinizing previous study results developed using the multinomial logit model. Although the previous model has an appropriate modeling structure in terms of the sign of coefficient estimates and goodness-of-fit, the model ignores the total number of trips and traffic congestion condition between the two zones and partially reflects zone-specific variables and choice set. Therefore, this study considered all of these modeling faults by re-constructing the representative utility functions. The modeling results show that travelers in Busan-Ulsan metropolitan area tend to choose their mode using mode-specific characteristics rather than the classical travel time and/or cost variables.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.471-478
• /
• 2003

In the Signalized Intersection, the capacity analysis is conducted with a large amount of input data such as road way, traffic and signal condition. but the level of service(LOS) is determined by delay estimated as a measure of effectiveness (MOE) based on this procedure. However, It is under the circumstances which are not considered for the errors caused by the uncertainty of input data in the field(the turing volumes, lane geometry, signal timing, grade of approach lane, percentage heavy vehicles, peak hour factor and arrival type etc.) as become the bases in the determination of the capacity and LOS. It includes the problem of reliability which is not verified for the capacity and LOS estimated. So, this study is to suggest the minimization of their influences by examining whether the uncertainty of input data such as the traffic volume, percentage of heavy vehicles and roadway geometry on the approach lane in the intersection under the study affects the capacity analysis and LOS determination.