• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.1
• /
• pp.15-22
• /
• 2020

Understanding the strength characteristics of model ice is an important issue for model testing in an ice model basin to estimate the ship performance in ice. In particular, the mechanical properties of the model ice including elastic modulus, flexural strength and compressive strength are key consideration factors. In order to understand the characteristics of the model ice during warm-up phase at KRISO's ice model basin, the strength properties are tested in this study. The infinite plate-bending method, in-situ cantilever beam test and ex-situ uniaxial compressive test are conducted to determine the strength properties of model ice. The strength characteristics of the model ice are then analyzed in terms of the warm-up phase and seasonality. These results could be valuable to quality control of the model ice characteristics in KRISO's ice model basin and to better understand the variations in strength properties during the ice model tests.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.37-39
• /
• 2001

구리 이온을 함유한 XCuOㆍ(50-X) Na₂Oㆍ50P₂O/sub 5/ 조성을 승온속도 10K/min로 900℃까지 숭온한 후 1시간동안 유지하여 용융하였으며, 연속적으로 가열되어진 흑연판에 부어 급냉함으로써 모유리를 제조하였다. 제조된 유리를 분말상의 시편으로 만들어 상온에서 증류수로 3일동안 용해시켰다. 각각의 조성에 따른 살균효과를 측정하였으며, 제조된 시편을 소지토에 첨가하여 그 항균특성을 관찰하였다. 항균특성 평가를 위하여 사용된 균주는 Staphylococcus aureus 와 Salmonella typhi가 사용되었으며, Staphylococcus aureus 균주에 대해서는 모든 시편 담지후 3시간 이후에, Salmonella typhi에 대해서는 6시간 이후에 모든 균이 소멸되는 것으로 관찰되었다.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.173-177
• /
• 2000

인산염계 5Li₂O, 36CaO, 20TiO₂, 27P₂O/sub 5/의 조성을 선정하여 10K/min 승온속도로 1300℃에서 2시간동안 유지시켜 모유리를 제조하였고, 최적의 핵형성을 위해 610℃에서 20시간, 최고 결정성장을 위해 840℃에서 20시간 동안 열처리함으로써 LiTi₂(PO₄)₃상과 β-Ca₃(PO₄)₂결정상이 존재하는 Glass Ceramics를 제조하였고, 이를 1N-HCI용액에서 3일간 담지하여 β-Ca₃(PO₄)₂결정상을 용출시켜 LiTi₂(PO₄)₃상만이 존재하는 다공성 Glass Ceramics를 제조하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.34-40
• /
• 2011

The bulk density, water absorption and microstructure of the artificial aggregates were controlled as a function of sintering temperature (1100 and $1200^{\circ}C$) and time (10~60 min) in the fabrication process of the artificial aggregates by the direct sintering process using dredged soil, the inorganic wastes. Also, the physical properties of the artificial aggregates fabricated according to the different sintering methods such as the direct sintering method used in this study and the increasing temperature sintering method used in the previous report, were compared and analysed. The bulk density of aggregates sintered at $1200^{\circ}C$ by the direct sintering method showed below 1.0, and the thickness of a shell and the pore size of the black core were increased with sintering temperature. Also, in the same sintering temperature, the area of black core was decreased, the thickness of shell was increased and the water absorption was decreased with sintering time. The black core of artificial aggregates of bulk density below 1.0 had the similar microstructure, regardless of sintering methods. In contrast, the shell of aggregates fabricated by the increasing temperature sintering method showed more dense microstructure than that by direct sintering method, hence the water absorption of aggregate sintered using direct sintering was relatively high. Thus, the direct sintering method is suitable for fabrication of artificial aggregates in ceramic carriers or absorbents applications.

• The Korean Journal of Rheology
• /
• v.10 no.2
• /
• pp.106-112
• /
• 1998

항공기용 소재로 개발된 에폭시/탄소섬유 복합재료가 매트릭스의 유리전이온도에 육 박하는 온도주기를 경험할 때 발생하는 복합재료의 구조 및 물성변화를 실험과 모델링을 통 하여 연구하였다. 복합재료의 표준 경화온도인 177$^{\circ}C$에서 2시간 체류시킨후 냉각시키는 바 복 열주기는 복합재료를 취약하게 하여 결국 표면에서부터 미세크랙이발생한다는 것을 알수 있었다. 이러한 열주기에 따른 미세크랙 현상은 매트릭스의 분해반응이 발생할수 있는 유효 표면적을 증가시키고 크랙을 통하여 산소의투과를 용이하게 함으로서 산화반응을 가속화하 여 복합재료시편의 무게감소를 가속화시키는 것으로 판단된다. 특히 본 연구에서는 등온과 등속도 승온조건을 주기적으로 반복하는 열주기 조건을 해석하기 위하여 열주기 조건을 특 정온도에서의 등오시간으로 전환할 수 있는 e-quivalent cycle time(ECT)를 제안하였고 이 를 이용하여 열주기에 의한 복합재료 손상의 가속/감속 현상을 규명할수있었다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.669-674
• /
• 2002

Ni-Zn ferrite was sintered by microwave hybrid sintering method using microwave energy of 2.45 GHz, 700 W in the temperature range of 900$^{\circ}C$ ∼ 1070$^{\circ}C$. A high density (98%TD) Ni-Zn ferrite, added Bi$_2$O$_3$ and CuO, with a single phase was obtained by microwave sintering at 970$^{\circ}C$ for 15 min. All the sintered samples showed sintered density over 90% of TD. These results indicate that the processing time and energy consumption can be reduced significantly by microwave hybrid sintering method.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.721-727
• /
• 2002

In order to overcome trade-off among compositions, process and properties of the glasses with high PbO-base composition for PDP Rib, we studied glass crystallization and crystallization kinetics by Differential Thermal Analysis(DTA). Glass powder was obtained through melting/cooling/grinding, with 3 wt%TiO2 addition for the crystal nucleation and growth in $62PbO-19B_2O_3-10SiO_2-9(Al_2O_3-K_2O-BaO-ZnO)$(in wt%) composition glass. This powder was heat-treated for 1 to 10 h at $445^{\circ}C$ for nucleation. DTA measurements were performed to obtain the crystallization peak with $5∼25^{\circ}C/min$ heating rates. DTA crystallization peak temperature increased with increasing the heating rate and decreased with increasing the heating time. Because the Avrami parameter (n) was approximately 1, the surface crystallization occurred. The maximum nucleation time was 2 h.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.4
• /
• pp.176-181
• /
• 2003

Rapid densification of a SiC powder with additive 0.5 wt% $B_4$C was conducted by spark plasma sintering (SPS). The unique features of the process are the possibilities of using very fast heating rate and short holding time to obtain fully dense materials. The heating rate and applied pressure were kept to be $100^{\circ}C$/min and 40 MPa, while sintering temperature and soaking time varied to 1800, 1850, 1900 and $1950^{\circ}C$ and 10, 20 and 30 min, respectively. All of the SPS-sintered specimens at $1950^{\circ}C$ reached near-theoretical density. The XRD found that 3C-to-6H transformation at $1850^{\circ}C$. The microstructures of the rapidly densified SiC ceramics consisted of duplex microstructure with ultrafine equiaxed grains under 2 $\mu\textrm{m}$ and elongated grains of 0.5∼2 $\mu\textrm{m}$ wide, length 3∼10 $\mu\textrm{m}$. The biaxial strength increased with the increase of sintering time. Strength of 392.7 MPa was obtained with the fully densified specimen sintered at $1950^{\circ}C$ for 30 min, in agreement with the general tendency that strength increases with decreases pore. On the other hand, the fracture toughness shows the value of 2.17∼2.34 MPa$.$$m^{1/2}$ which might be due to the transgranular fracture mode.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.5
• /
• pp.17-17
• /
• 2001

고유전 (Ba, Sr)TiO₃ (BST) 박막을 이용한 DRAM storage capacitor의 저전계 영역에서의 전하손실을 발생시키는 커패시터의 누설전류는 유전완화전류와 진성 누설전류로 이루진다고 알려져 있다. 특히, 기가급 DRAM의 동작 전압(~IV)에서 유전완화전류가 진성 누설전류에 비해 훨씬 크기 때문에 이에 대한 심도 있는 연구가 필요하다. 본 연구에서는 thermally stimulated current (TSC) 측정법을 BST 박막에 처음으로 적용하여 트랩의 에너지 level 및 공정변화에 따른 트랩 밀도의 상대적 평가를 하였다. 그리고, 기존에 사용되던 전류-전압(I-V) 측정이나 전류-시간(I-t) 측정과 비교 및 분석함으로써 유전완화 전류의 원인을 규명하고 TSC 측정법의 신뢰성을 살펴보았다. 먼저 안정적인 TSC 측정을 위해 전계, 시간, 온도 및 승온속도에 따른 polarization condition을 알아보았다 이 조건을 이용한 TSC 측정으로부터 BST 박막에서의 트랩의 energy level이 0.20(±0.01) eV와 0.45(±0.02) eV임을 알 수 있었다. Rapid thermal annealing (RTA)을 이용한 후속 열처리에 따른 TSC 측정을 통하여 이 트랩들이 산소결핍(oxygen vacancy)에 기인함을 확인할 수 있었다. MIM BST 커패시터의 열처리에 대한 TSC 특성은 전류-전압(I-V) 및 전류-시간(I-t) 특성과 같은 경향성을 보인다. 이것은 TSC 측정이 BST 박막내의 트랩을 평가하는데 있어서 매우 효과적인 방법이라는 것을 보여준다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.191-196
• /
• 1999

Effects of agitation and heating rate on crystallinity, size distribution and mean size of $\alpha$-$SiO_2$powder prepared hydrothermally were investigated. $\alpha$-$SiO_2$crystalline powder, in mean particle size of 1~3.2 $\mu\textrm{m}$, was obtained at $350^{\circ}C$ using KOH as a mineralized for a 3 h reaction. Experimental results showed that particle size became smaller as the rate of agitation increased if it was introduced from the beginning of reaction, however, crystallinity was reduced at the low rate of agitation and it was became enhanced at above 150 r/min. Particle size became larger if agitation was introduced at any time during the reaction rather than introduced from the beginning of reaction. It was also found that particle size became smaller if heating rate was reduced, while the rate of agitation kept constant.