• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.255-256
• /
• 2020

본 논문은 0V에서 100V까지 매우 높은 승·강압비를 갖는 양방향 DC-DC 컨버터를 제안한다. 제안하는 시스템은 2-Stage 구조로 SRC(Series Resonant Converter)와 DBC(Differential Buck Converter)로 구성된다. 제안하는 컨버터의 출력 전압은 두 개의 각 벅 컨버터 출력 전압의 전위차로 결정되기 때문에 0V에서도 높은 전압으로 승압이 가능하다. 본 논문에서는 제안하는 컨버터의 타당성을 검증하기 위하여 15kW급 시작품을 제작하였고 96.27%의 최고효율을 달성하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.437-442
• /
• 2001

Recently, transformerless inverters have been studied to reduce sizes and costs of utility-connected PV systems. This paper presents a transformerless PV inverter using a two-phase boost converter of reduced ripples in input current and output voltage, low voltage stress of semiconductor device and reduced size of input reactor. And new PWM method is introduced, whose on-off time is calculated from simultaneous equation induced by fourier series. To verify a validity of the proposed transformerless inverter, computer simulation has been carried out.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.97-98
• /
• 2012

본 논문에서는 친환경 자동차용 양방향 절연형 저전압 직류변환장치(Low voltage DC-DC converter, LDC)를 제안한다. 제안한 컨버터는 직렬 공진형 컨버터를 이용한 2단 방식으로 비절연 컨버터가 전압 및 양방향 제어를 하며 절연부는 고정듀티와 고정주파수로 동작시켜 전 부하영역에서 ZCS 턴온 및 턴오프가 가능한 장점을 갖는다. 또한 양방향 전압제어가 가능한 제어 전략을 제안하였다. 5 kW급 시작품으로 제안한 방식의 타당성을 검증하였으며 강압모드시 최고효율 95.13 %, 승압모드시 최고효율 95.08 %를 달성하였다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.11-12
• /
• 2014

차량용 양방향 DC/DC 컨버터에 적합한 새로운 토포로지 및 그 구성방법을 제안한다. 제안된 구성방식은 공통접지를 사용하는 새로운 양방향 공진형 충전펌프 토포로지와 기존 양방향 컨버터와 결합한 2단방식의 양방향 DC/DC 컨버터이다. 제안된 2배 승압 공진형 충전펌프는 전력변환 효율 증대와 병렬 구동 시 공진회로가 영향이 받지 않게 하기위해 출력 측으로 전력 전달시 인덕터가 입력전원과 직렬로 구성하게 하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.461-468
• /
• 2008

This paper presents a novel series connected DC/DC converter and a proper variable phase shift switching method in order to obtain high voltage ratio for fuel cell system. The proposed series connected DC/DC converter has same rectifier and LC filter for DC output voltage, so it can reduce the number of passive devices regardless of the converter number. In the conventional constant phase shift switching method, the proposed series connected DC converters have inverse bias output voltage. In order to overcome this problem, a simple but proper variable phase shift switching method is proposed in the a novel series connected DC/DC converter. In order to verify the proposed system, simulation and experiments are implemented.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.4
• /
• pp.372-380
• /
• 2004

This paper proposes a single-power-stage high frequency resonant AC-DC converter with high power factor using ZVS(Zero Voltage Switching), and integrates a conventional converter with two stage into single stage converter. Input power factor is possible to be improved as a high power factor because inductor for power factor correction(PFC) is connected in input and converter is operated in discontinued current mode(DCM) with constant duty cycle and variable switching frequency. The conventional converter with two stage need to add a switch in order to control a power factor, but single stage converter have a advantage that system is simple and cost is down, confidence is improved, etc. This paper described a operation principle and characteristic analysis for single stage AC-DC converter with high power factor and have evaluated characteristic values by using normalized parameter. We make a experimental equipment using MOSFET as a switching device on the basis of characteristic values obtained from characteristic evaluations and we conform a rightfulness of theoretical analysis by comparing theoretical waveforms and experimental waveforms.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.41-48
• /
• 2004

In this paper, a PFC(Power Factor Correction) electronic ballast with constant voltage-fed is proposed. The proposed PFC electronic ballast is combined of a high-efficiency boost converter and a conventional half bridge inverter. It is proved that the ripple of input-current and the input-current's harmonic of the proposed PFC electronic ballast are reduced using the voltage divider and soft-switching technique. It is demonstrated that simulation results for fluorescent lamp correspond with theoretical analysis.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.188-192
• /
• 2004

이 논문에서 정 전압형 PFC 전자식 안정기에 대하여 제안하였다. 제안하는 PFC 전자식 안정기는 고효율 승압형 컨버터와 기존의 하프브리지 인버터를 조합한 것이다. 제안된 PFC 전자식 안정기는 전압 분압기와 소프트 스위칭 기술을 사용하여 입력전류의 왜형과 입력전류의 고조파가 감소됨을 증명하였다. 형광램프에 대한 시뮬레이션결과는 이론적인 분석과 일치함을 나타내었다.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.34-36
• /
• 2007

A new soft switching boost converter is proposed in this paper. The conventional boost converter generates switching losses at turn on and off. Because of that, the whole system efficiency is reduced. The proposed converter utilizes soft switching method using an auxiliary switch and resonant circuit. Thus, the converter reduces switching losses lower than ones of hard switching method. The proposed soft switching boost converter can be applied to photovoltaic system, power factor correction circuit and so on.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.289-292
• /
• 2007

The modular line-connected photovoltaic PCS (power conditioning system) is proposed. The proposed system consists of a step-up DC-DC converter and a full-bridge inverter. A step-up DC-DC converter using a dual series-resonant rectifier circuit and a active-clamp circuit is proposed to achieve a high efficiency and a high input-output voltage ratio efficiently. An IncCond (incremental conductance) MPPT (maximum power point tracking) algorithm that improves MPPT characteristic is used. By control a inverter using a linearized output current controller, a unity power factor is achieved. All algorithms and controllers are implemented on a single-chip microcontroller and the superiority of the proposed algorithms and controllers is proved by experiments.