• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.3
• /
• pp.19-31
• /
• 2007

Humidity and strain were estimated for understanding the relation between humidity change by self-desiccation and shrinkage in high-performance concrete with low water binder ratio and containing fly ash and blast furnace slag. Internal humidity change and shrinkage strain were about 10%, 10%, 7%, 11%, 11% and $320{\times}10^{-6}$, $270{\times}10^{-6}$, $231{\times}10^{-6}$, $371{\times}10^{-6}$, $350{\times}10^{-6}$ respectively on OPC30, O30F10, O30F20, O30G40, O30G50 and from the results, fly ash made humidity change and strain decrease but slag increase comparing with ordinary portland cement. Considering only relation internal humidity and shrinkage by self-desiccation, humidity change and shrinkage represented the strong linear relation regardless of mineral admixture. For specifying the relation on internal humidity change and autogenous shrinkage strain, shrinkage model was established which is driven by capillary pressure in pore water and surface energy in hydrates on the assumption of a single network and extended meniscus in pore system of concrete. This model and experimental results had a similar tendency so it would be concluded that the internal humidity change by self-desiccation in HPC originated in small pores less than 20nm, therefore controlling plan on autogenous shrinkage might be focused on surface tension of water and degree of saturation in small pore.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1458-1459
• /
• 2002

PE(Polyethylene)와 PP(Polypropylene)의 sheet 에 $Co^{60}{\gamma}$-ray 선원을 실온, 대기 중에서 10 kGy, 30 kGy, 50 kGy의 방사선량으로 조사시키고 습도 분포에 따른 표면 및 체적 저항을 측정한 결과 방사선이 조사되지 않은 시료와 방사선이 조사된 시료와의 저항 값은 큰 차이를 보이지 않았으나 습도 효과에 따른 변화는 습도 분포가 높을수록 저항 값은 상대적으로 낮게 나타났다.

• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.253-259
• /
• 2014

This study was conducted to investigate survival of Bacillus cereus (B. cereus) on stainless steel and polyvinyl chloride (PVC) and its transfer from two material to lettuce. The stainless steel and PVC were innoculated with B. cereus and stored at 6 combination conditions (temperature : $20^{\circ}C$ and $30^{\circ}C$, relative humidity (RH) : 43%, 69%, and 100%). Although the total numbers of B. cereus at RH 43% and RH 69% were reduced by 3.53-4.00 log CFU/coupon within 24 h regardless of material type, the spore numbers of B. cereus was lasted at 3.0 log CFU/coupon. When two materials were stored at $30^{\circ}C$, RH 100%, the spore numbers of B. cereus was rapidly increased by 3.0 log CFU/coupon. In addition, the reduction rate of B. cereus was decreased in the presence of organic matter. Transfer rate of B. cereus from surface of stainless steel and PVC to lettuce was increased by 10 times in the presence of water on the lettuce surface. As a result of this study, the presence of B. cereus on produce contact surfaces can increase the risk of cross-contamination. Thus, it is important that the packing table and conveyer belt in post harvest facility should be properly washed and sanitized after working to prevent cross-contamination.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.865-871
• /
• 2017

In this paper, a gelatin layer was formed on the surface of the twisted fiber-optic couplers fabricated by hydrofluoric acid, which can be used to measure relative humidity. The proposed method of sensors has advantage of low cost compared with the sensors based on the conventional electronic devices and takes beneficial characteristics of optical fibers and light. The fiber-optic sensors presented in this study show a measurement from about 40% to 85% relative humidity, and the experimental results agree well with the calculated results. Based on the design presented in this paper, the structure will enable promising applications in the detecting humidity and various hazardous gases.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.741-744
• /
• 2008

Quality control of early age concrete significantly influences the long term performance. Primary factors for early age concrete quality control should include the relative humidity and temperature variation, and these are more important as structures become massive and huge. Temperature raise due to cement hydration causes stress, which can develop to cracking with internal and/or external restraints. Exposure conditions including ambient temperature, humidity and wind also significantly affect the cracking behavior of early age concrete. Among many of studies on the early age concrete behavior, investigation on the variation of temperature and relative humidity internal of concrete is not common. That is in part because the difficulties in measuring the relative humidity and temperature inside the concrete. This study used a digital sensor with an appropriate logger to measure internal temperature and relative humidity. This direct measuring method is expected to provide more reliable and comprehensive data acquisition on the early age behavior of concrete.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.10a
• /
• pp.151-153
• /
• 2008

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.1056-1061
• /
• 1994

Adhesion between cord and rubber compound of brass plated steel cords pretreated at $80^{\circ}C$ in air and at $80^{\circ}C$ and 85% of relative humidity was studied. Surface change of brass with pretreatment was also studied. Brass was oxidized at thermal treatment and oxidation was accelerated with water at humid treatment. Adhesion of pretreated cords decreased with treatment period. The decreasing tendency of rubber coverage was severe. Decrease in adhesion properties due to brass oxidation was discussed relating to the overgrowth of zinc oxide layer.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.91-100
• /
• 2011

This study is to examine the PEG concentration, and drying humidity and drying periods of humidity-controlled drying(HCD) for conservation of waterlogged woods(Pinus densiflora S. et Z.), and dimension stability of HCD were compared with those of air-drying and vacuum freeze-drying(VFD). Dimension stability of vacuum freeze-drying was the most excellent, i.e., PEG crystal was uniformly distributed in woods. Increasing concentrations of PEG, dimension stability of HCD was increased and drying periods decreased. Dimension stability of HCD after the treatment with the high concentration(70%) of PEG soaking was similar to those of VFD after the treatment with the low concentration(40%) of PEG soaking. In conclusion, high concentration(about 70% in water) PEG solution was the most suitable as a pre-treatment for HCD of waterlogged woods. However, drying should be maintained with enough high humidity and longer period.

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.203-211
• /
• 1989

During hot air drying of root vegetables such as radish and sweet potatoes, shrinkage and casehardening occurred, and thereby the quality change appeared. Therfore the hot air drying apparatus in which air temperature, relative humidity and air velocity could be controlled was designed, and the drying and shrinking characteristics of radish and sweet potatoes were studied. Also the external factors that affected these characteristics were investigated. The whole drying process of radish and sweet potatoes could be divided into four different drying rate periods, namely constant rate period, first falling rate period, second falling rate period (a) and (b). The shrinking rate curve consisted of four periods nearly corresponding to drying rate periods. The shrinking rate slowly increased in the constant rate period, rapidly increased in the first falling rate period, and reached the highest value in the early period of the second falling rate period. The surface shrinkage was greatly affected by the thickness of sample, relative humidity and initial moisture content. The shrinking ratio was increased with decreasing thickness and increasing relative humidity and initial moisture content.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.03a
• /
• pp.71-88
• /
• 2005

With biological organism brown pollutants layers are thickly formed on inner stone materials in Gyeongjuseokbinggo(Ice storage in Gyeongju). Some simples were taken from this layer and its chemical composition, mineral composition, salt and microstructures were analyzed. This study shows that the pollutants layer can be removed easily, because it attached softly in stone surface. But because of its serious weathering state the stone surface also can be removed during the removing process. The origins of brown layer are assumed to be the soil in the mound over the Seokbinggo and the coarse sandy soil in the entrance. For the preservation of the Seokbinggo Waterproof and replacement of the coarse sandy soil should take precedence over the remove works. Subsequently moistureproof works should be enforced.