• Journal of Radiation Protection and Research
• /
• v.27 no.3
• /
• pp.165-170
• /
• 2002

Combined with deposition model onto the ground of radionuclides, the influence of radioactive contamination to agricultural products was analyzed due to wet deposition as well as dry deposition from radioactive air concentration during a nuclear emergency. The previous dynamic food chain model, in which initial input parameter is only radionuclide concentrations on the ground, was improved for the evaluating of radioactive contamination to agricultural products from either radionuclide concentrations in air or radionuclide concentrations on the ground. As the results, in case of deposition onto the ground, wet deposition was more dominant process than thy deposition. While the contamination levels of agricultural products were dependent on the a variety of factors such as radionuclides and rainfall rate. It means that the contamination levels of agricultural products are determined from which is more dominant process between deposition on the ground and interception onto agricultural plants.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.11a
• /
• pp.35-37
• /
• 2001

입자상 물질에 대한 건성침적속도를 구하는 두 가지 모형 중 Slinn의 모수화로 구축된 건성침적모형이 ADOM 건성침적모형에 비해 좀 더 신뢰성있는 결과를 산출하였고 부산광역시에서의 입자상 물질에 대한 건성침적속도 수치모의 결과도 전반적으로 거칠기 길이가 큰 산림지역에서 높은 값이 나타남을 보여주었다. 입자상 물질의 건성침적속도 계산에 있어 가장 중요한 것은 대상 입자의 크기이므로 무엇보다도 그 물질에 대한 정확한 크기분포에 대한 규명이 있어야 하고 또한 본 연구에서는 다루지 못한 수면의 높은 풍속에서의 물결 파괴, 물보라 형성 그리고 물과 공기경계면 근처의 습한 지역에서 입자 성장의 영향 등을 고려하는 좀더 자세한 연구가 추후에 이루어져야 할 것이다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.402.1-402
• /
• 2002

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.461-466
• /
• 1999

The humidity sensor containing ammonium salt was prepared from the copolymer of 2-methacryloxyethyl dimethyl 2-hydroxyethyl ammonium bromide (MDHAB)/MMA/DAEMA = 6/3/1. The humid membrane was fabricated on the gold/alumina electrode by dipping. The impedances were $298k{\Omega},\;11k{\Omega}$, and $2.3k{\Omega}$ at 40%RH, 70%RH and 90%RH, respectively, at $5^{\circ}C$ and the humidity-sensitive characteristics were suitable for low temperature humidity sensor. The temperature-dependent coefficient between $5^{\circ}C$ and $20^{\circ}C$ was found to be $-0.80%RH/^{\circ}C$ and the hysteresis falled in the ${\pm}2%RH$ range. The response time was found to be 38 sec for the relative humidity ranging from 34%RH to 88%RH at $20^{\circ}C$. The reliabilities such as temperature cycle, humidity cycle, high temperature and humidity resistance, electrical load stability, stability of long-term storage and water durability were measured and evaluated for the application as a humidity sensor.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.554-560
• /
• 1998

Vinylbenzyl triphenyl phosphonium chloride(VTPC)/styrenes=3.7 copolymer was prepared for the moisture-absorptive polyelectrolyte dew sensor containing phosphonium salts. The humid membrane was fabricated on the gold/alumina electrode by dipping. The impedances were $11M{\Omega}$, $980k{\Omega}$, $50k{\Omega}$, and $11k{\Omega}$ at 70%RH, 80%RH, 90%RH and 95%RH, respectively, at $25^{\circ}C$ and the humidity-sensitive charactristic was suitable for the dew sensor. The temperature-dependent coefficient between $15^{\circ}C$ and $35^{\circ}C$ was found to be $-0.25%RH/^{\circ}C$ and the hysteresis falled in the ${\pm}2%RH$ range. The response time was found to be 45 sec for the relative humidity ranging from 70%RH to 98%RH at $25^{\circ}C$. The reliabilities such as temperature cycle, humidity cycle, high temperature and humidity resistance, electrical load stability, stability of long-term storage and water durability were measured and evaluated for the application as a dew sensor.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.326-332
• /
• 2009

New humidity-sensitive monomer, N-methacryloyl-N'-ethyl-N'-propyl piperazinium bromide (MANEPPB) was prepared by the quaternization reaction of N-methacryloyl-N'-ethyl piperazine (MANEP) with 1-bromopropane. Polyelectrolytes derived from the copolymers composed of MANEPPB/MMN/AA=60/35/5, 70/25/5, 80/15/5, 90/5/5 and 95/0/5 were prepared for the humidity-sensitive membranes, which were fabricated on the gold electrode by dipping method and were crosslinked by reacting copolymers with aziridine crosslinker, trimethylolpropane tris(2-methyl-1-aziridinopropionate) (TTAP). When the resistance dependences on the relative humidity of the sensors were measured, it was found that the resistance varied three orders of magnitude between 20 and 90%RH, which was satisfied with the requirement for the common humidity sensor operating at ambient humidity. Their hysteresis, temperature dependence, frequency dependence, response and recovery time and water durability were measured and evaluated as a humidity-sensing membrane.

• Journal of Conservation Science
• /
• v.6 no.2 s.8
• /
• pp.141-148
• /
• 1997

When we have entered high economic growth since 1970s, many archaeological excavations were performed all over the country. Excavated objects composed of variable materials are inevitably subjected to deformations owing to surrounding environments and storage conditions. Although the importance of conservation treatment of the objects is greatly increased, a few conservation laboratories are there comparing with excavation groups. The metallic objects excavated are very unstable and deformable state. So it is important not to allow iron objects, especially cast iron, to dry out once excavated. Because the corrosion reactions on the surface proceed rapidly, the objects may be destroyed at the moment. The conservation procedures of the excavated metallic objects are as follows: (1)It is stable on-site storage method for objects to keep vinyl film with envelop or to immerse alkaline solution to prevent the environmental changes. (2)The objects must be treated at once under suitable methods in the conservation laboratory after excavation. (3)The continued existence of objects depends on environmental factors such as relative humidities, regular inspection, light etc.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.3
• /
• pp.202-211
• /
• 2011

In this study the seasonal and spatial pattern of mercury (Hg) concentrations in multimedia environments were investigated in Lake So-Yang. Total mercury (TM) in water column greatly enhanced as turbidity and particulate organic carbon (POC) increased due to the severe runoff, suggesting that most of Hg existed as particulate Hg in Lake Soyang. We also collected 22 species of fish in Lake Soyang and Han River, and the average total mercury in fish was 0.073 ppm, lower than both Korean (0.5 ppm) and EPA criteria (0.3 ppm). However when considering the amount of fish intake for Korean the Hg criterion in fish must be more stringent than current value, and the advisory for fish consumption should be made. Hg in fish considerably varied with sampling sites, having the highest in the upper region (Yang-gu) and the lowest in downstream (Han River). This spatial variation was possibly derived by "bloom dilution" associated with high phosphorus loading or elevated DOC concentrations, or both. Total mercury in sediment varied from 69.9 to $98.3{\mu}g/kg$, which was relatively lower than those measured in Voyageurs National Park in Minnesota in USA ($102{\sim}364{\mu}g/kg$).

• Polymer(Korea)
• /
• v.34 no.4
• /
• pp.313-320
• /
• 2010

New cinnamate group-containing copolymers for a self-curable, humidity-sensitive polyelectrolyte and polymeric anchoring agents were prepared by copolymerization of [2-[(methacryloyloxy) ethyl]dimethyl]propyl ammonium bromide(MEPAB), methyl methacrylate(MMA), 3-(trimethoxysilyl) propyl methacrylate(TMSPM) and 2-(cinnamoyloxy)ethyl methacrylate(CEMA). Photocrosslinkable copolymer composed of MEPAB/MMA/TMSPM/CEMA＝70/20/0/10 were used for humidity-sensitive membrane, and those of 50/0/20/30 and 0/0/50/50 were used for polymeric anchoring agents. 3- (Triethoxysilyl)propyl cinnamate(TESPC) was also used as a surface-pretreating agent for the comparison of capability of attachment of polyelectrolyte to the electrode surface with polymeric photocurable silanecoupling agents. Pretreatment of the electrode substrate with anchoring agents was performed to form a cinnamate thin film on the electrode through covalent bonds. When the sensors were irradiated with UV light, the anchoring of a polyelectrolyte into the substrate was carried out via the [2$\pi$+2$\pi$] cycloaddition. The resulting sensors using polymeric anchoring agents and TESPC showed water durability with increase of resistance by 60~85%, which is corresponding to the reduction of 2.25~3.15%RH, after soaking in water for 24 h. They showed good hysteresis (-0.2%RH), response time (90 sec) and long-term stability at high temperature and humidity.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.549-561
• /
• 2020

This study aimed to assess the performance and life of nine natural mineral dancheong pigments: Seokganju, Jinsa, Hwangto, Jahwang, Wunghwang, Seokrok, Noerok, Seokcheong, and Baekto. The design of the accelerated weathering test considered the domestic climate characteristics and the location of Dancheong. Outdoor weathering tests were conducted at the Research Institute in Daejeon and the Sungnyemun Gate in Seoul to confirm the field reproducibility of the accelerated weathering test. Monitoring of the physical changes in pigments through accelerated and outdoor weathering tests are based on ultraviolet exposure dose. Despite small cracks at the beginning of the tests, the monitoring showed that Seokganju and Baekto had no marked physical changes, but the surface cracks of Jinsa and Seorok continue to expand. Hwangto and Noerok were marked with water or were resin stained, and the particles of Jahwang, Wunghwang, and Seokcheong had lost their luster. Despite the absolute difference in color change in each test, the final chromaticity change patterns of pigments were similar in that the color difference between Baekto and Noerok was below five, and Jina was above 28. The physical and surface color pigment changes were more concentrated in outdoor weathering tests than in accelerated tests, and the Seoul site was more intense than the Daejeon site. This is because outdoor weathering tests are exposed to severe variations of temperature and moisture or deposition of dust particles and, in the case of Seoul, the site is more exposed to the external environment than the Daejeon site.