• Journal of the Korean Geotechnical Society
• /
• v.32 no.5
• /
• pp.49-55
• /
• 2016

This study aims to present the practical Nitrogen monoxide (NO) removal capacity of cement mortar with Titanium dioxide ($TiO_2$) which is one of the paving materials by considering the environment of pavement in urban areas. NO removal capacity test under designated conditions of humidity of inflow gas and the test with variation of the degree of saturation of specimen were conducted. In the test for humidity, dry specimen is subject to the test and NO removal ratio was observed. Humidity-NO removal ratio curve is a log normal distribution in shape, and the maximum NO removal ratio appears at specific humidity. NO removal capacity test relying on the degree of saturation was carried out with wet specimen to reflect the unsaturated pavement by rainfall and domestic sewage. Wet specimen presents less NO removal capacity than dry specimen and the recovering evolution of NO removal capacity follows evaporation. Moreover, $TiO_2$ under the specific depth of specimen hardly contributes to NO removal capacity.

• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.570-577
• /
• 1999

Intuitively, higher bond strengths should result in less leakage. However, the relationship between bond strengths and microleakage value is complex and not clearly understood. The purpose of this study was to evaluate the relationship between tensile bond strengths and microleakage values in the same restorations to understand the behavior of resin bonding to tooth structure. One-hundred and twenty enamel or dentin specimens from freshly extracted bovine mandibular incisors were used. The specimen was treated with 32% phosphoric acid for 15 seconds and rinsed for 20 seconds. the teeth were divided into four groups by means of wet bonding technique or dry bonding. One-Step$^{TM}$ adhesive were applied to the specimen. The specimens were immersed in 2% methylene blue solution for 7 days, and tensile bond strength and microleakage were measured. The results were as follows: 1. Significant negative correlation was found between bond strengths and micro leakage values. Hence, higher bond strengths seem to be associated with lower microleakage, and vice versa (r=-0 50, p<0.05). 2. The Enamel/Wet group showed significantly higher bond strength than Enamel/Dry one, and Dentin/Wet group showed higher strength than Dentin/Dry one (p<0.05). 3. Microleakage was significantly less ill wet bonding than in dry one at dentin (p<0.05), however, there was no significant difference between wet and dry bonding at enamel (p>0.05).

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.129-130
• /
• 2008

텐터의 성능을 결정하는 요인은 여러 가지가 있으나, 섬유의 종류 또는 가공 공정의 목적에 따라 적절한 건조속도 및 효율성, 원단의 전 폭에 걸친 건조 균일도, 습윤 공기의 자동 배출, 원단의 장력 및 오버피드, 그리고 각종 자동화 제어 장치의 활용 등으로 구분되어 질 수 있으며, 그러므로 텐터기 챔버 내부의 공간구조에 따른 비효율적 유로형상과 공기 분사노즐 정확한 압력 및 온도분포에 대한 현장 기초자료를 확보하여 텐터의 에너지 절약 및 건조 원단의 품질을 향상시킬 수 있는 구조의 설계가 요구된다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.53-64
• /
• 2013

The car-following model is one of core models in Advanced Vehicle & Highway Systems (AVHS). The car-following model has been developed in aspects such as human factor and reduction error rates. However, the consideration of safety depending on weather condition has not been completed yet. In this paper, therefore, changes of driving condition for car-following due to different road condition were dealt with, and optimal safety distance corresponding to road condition such as dry, wet and snowy were computed. The GMIT(GM Model with Instantaneous T) model was picked over for simulation of adaptive cruise control applied the suggested optimal safety distance. As the results, the 1.7 times longer safety distance was required for wet road condition than dry road condition, and the 5.6 times longer safety distance was required for snowy road condition.

• Korean Journal of Food Science and Technology
• /
• v.18 no.2
• /
• pp.93-97
• /
• 1986

Dried barley moodle was made with the addition of gelatinized corn flour as binder by using piston type noodle piston press, in which the temperature was kept below the temperature of protein denaturation. The evacuation of air bubble from the dough strengthened the wet noodle strands and improved the cooking quality of the dry noodle. Although the binder was indispensable, the addition should be less than 20%, because the gelatinized corn flour increased the turbidity of the cooking water. Kneading with 3% solution of soy protein resulted in improvement of the noodle's cooking quality.

• Journal of the Korean earth science society
• /
• v.22 no.2
• /
• pp.105-111
• /
• 2001

Seven specimens of raindrop imprints are discovered from the Late Triassic Amisan Formation of Nampo Group distributed in the Myeongam area of Boryeong-City, Chungcheongnam-do. The raindrop imprints are interpreted to had been formed in lacustrine environments under subtropical humid climate during the lowered period of the surface of the water by temporally or seasonally arid climate. The raindrop imprints are the first finding in the Lower MesozoicNampo Group, Korea.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.63-63
• /
• 2000

저급의 고지 원료를 두께 방향으로 고온 압착을 가하여 건조함으로써 전반적인 종이 물성 을 향상시키는 콘디벨트 건조 방식은 70년대 중반부터 80년대에 이르는 10여년에 걸친 개발 과정을 거쳤으며 90년대에 들어서 핀랜드의 Inkeroinen에 위치한 V alemt- Tarnpella의 연구 소에 최초의 파일로트 설비가 설치되었으며 그 후 1996년에는 핀랜드 ENSO사의 P Pank밟oski 판지공장에 설치됨으로써 세계 최초의 상업생산설비를 이루게 되었다. 기존의 실린더 건조 기술과 비교할 때 콘디벨트 건조방식은 건조속도를 약 5-15배 향상시킬 수 있 으며, 건조 에너지 절감에 큰 효과가 있을 뿐만 아니라 기존의 실린더 건조시 종이가 폭방 향으로 수축되 어 인장 stiffness와 압축 강도 동의 종이 물성 이 저 하되 는 반면 습윤상태 의 섬유를 120도씨이상에서 가열에 의해 리그닌을 연화시킴과 동시에 섬유의 유연성을 증가시켜 준다. 그리고 높은 압력을 가해줌으로써 섬유간의 결합 면적을 증가시키고 건조시 종이의 폭방향의 수축을 감소시켜 인장강도, 내부결합강도, 밀도, 표면평활성, 투기저항성 등 종이의 물성을 대폭 향상시켜주는 혁신적인 제지기술로 인정받고 있으며 국내의 경우 현재 1998년 부터 상업생산을 이루어짐으로써 그 공헌도는 매우 크다고 할 수 있다. 골판지의 주원료가 되는 국산 골판지 고지 (Korean old corrugated container, K KOCC)의 거듭된 재생처리로 인하여 미세분의 함량이 전체 지료의 절반 이상에 달할 뿐만 아니라, 섬유가 각질화와 단섬유화로 인하여 고온압착 건조처리 만으로는 골판지 고지로 생 산된 원지의 강도를 버진펄프로 생산된 원지가 가지는 강도에 준하는 강도로 향상시키는데 한계점을 가지게 된다. 유럽의 제지선진국들은 골판지 원지의 강도를 향상시키는 방편으로 표변에 전분 사이즈 프레스 처리를 도입하였으며 본 연구에서는 고온 압착 건조 처리 설비를 활용한 전분 표면처리의 가능성을 검토하고 골판지 원지의 강도를 향상시키기 위한 표면처리조건을 탐색하였다.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.4
• /
• pp.113-121
• /
• 2011

River sand has generally used for the backfill material of underground power cables. The thermal resistivity of it has $150^{\circ}C$-cm/Watt in wet condition and more than double in dry condition. The final goal of this study is to find the backfill material which has a small change in thermal resistivity with various water contents, for example thermal resistivity is $50^{\circ}C$-cm/Watt and $100^{\circ}C$-cm/Watt in wet and dry conditions respectively. In this study it is presented that the comparison of thermal resistivity using stone powder, crush rock, weathered granite soil and Jumunjin sand as well as river sand in the needle method regarding water content, dry unit weight and particle size distribution. As a result, the thermal resistivity of a material is minimized when they have maximum dry unit weight at optimum moisture content and maximum density by appropriately mixing materials for particle size distribution. Therefore thermal resistivity characteristics should be considered two factors: one is the difference between natural dry condition and dry state after optimum moisture content, and the other is the difference between unit weight of raw material and maximum dry density.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.255-264
• /
• 2011

Purpose: To study the effect of hyaluronic acid(HA), which was widely used in artificial tears, multi-purpose solution(MPS), cosmetics, and drug acting on the musculo-skeletal system, in wettability and comfort of contact lens, we compared HA including lens(+HA) with HA excluding lens(-HA) by clinical evaluation. Methods: During four weeks, the selected 28 university student volunteers who did not have any eye disease wore +HA contact lens on their right eyes, and -HA contact lens on their left eyes, and then compared right eyes to left eyes as control. After prescribing by spherical equivalent calculation, over-refraction by auto-refractometer, and contact lens wearing for two weeks and four weeks, tear evaluation, the anterior of eyes examination, fitting convenience evaluation, surface wetting test, surveys were checked up. Results: Compared with the control group (-HA contact lens), +HA contact lens provided better wetting properties. The amount of released tear in -HA contact lens group became less in four weeks than before, but that in +HA contact lens group showed no significant difference from the initial one. In terms of the redness in eye, there was no significant difference between +HA and -HA contact lens groups. Fitting of +HA contact lens on eye was much easier than the control, -HA contact lens. From the results of survey, comfort, wettability, ease of cleaning, and dryness of eye in +HA contact lens group were generally better than those of -HA group, but redness and contact lens handling showed little difference. Conclusions: The addition of HA in soft contact lens(+HA) may enhance the wettability of lens during lens wearing, resulted in the better comfortable wearing of lens eventually.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.2
• /
• pp.127-134
• /
• 2017

In this study, moist curing equipment was used in the exist gang-form system. By achieving sufficient spray curing, the quality of the concrete was improved and the cracking occurred in building's side wall was decreased. The following results could be made as the conclusion. For the compressive strength, all zones showed the similar results. Comparing with the zone without using moist curing equipment, the zone used moist curing equipment showed higher rebound hardness results. For the cracking, the zone utilized moist curing equipment showed the cracking averaged as 6.6 m and the zone without using moist curing equipment showed the cracking averaged as 10.3m. The effectof reducing cracking by utilizing moist curing equipment is about 36 %. Using moist curing equipment is considered as a good solution to reduce the cracking in the structure. Considering all the factors analysed, using moist curing equipment improved the quality of the concrete and decreased the cracking. When this equipment was used in the construction site, it is expected that the construction periodcan be shrunk and the ratio of defect caused by drying shrinkage can be decreased. In this research conditions, The 0.3mm sized moist curing equipment provided the most desirable results on concrete quality and preventing cracking.