• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.07a
• /
• pp.89-90
• /
• 2015

본 논문에서는 폐 스마트폰을 활용하기 위한 원격제어 CCTV 시스템에 대하여 기술한다. 시스템은 폐 스마트폰용 애플리케이션과 폐 스마트폰을 거치할 수 있는 스마트독, 그리고 사용자용 애플리케이션으로 구성된다. 폐 스마트폰용 애플리케이션은 스마트독을 제어할 수 있고 영상을 전송할 수 있다. 스마트독은 온도, 습도, 적외선 센서와 서보모터가 장착되어 있다. 사용자용 애플리케이션은 영상을 확인할 수 있고 스마트독의 센서 데이터를 전송받을 수 있다. 본 논문에서 제안하는 시스템은 늘어나는 폐 스마트폰을 효율적으로 활용할 수 있고 적은 비용으로 실내 CCTV 환경을 구축할 수 있다는 장점이 있다.

• Journal of the Korean Society of Radiology
• /
• v.5 no.3
• /
• pp.127-134
• /
• 2011

In this paper we propose an improved PV generation systems. Improved systems for temperature and humidity controlled heating and air conditioning offers a pleasant environment within the building, set up chopper and consists of a PWM voltage type inverter. The proposed system is stable modulation for a one-chip microprocessor using the synchronous signal and control signals was treated. The proposed system is a PWM voltage type inverter and phase of the synchronous to the grid voltage to detect the system voltage and inverter output to drive the statue, so surplus power to connection was able to, certain buildings such as buildings or hospitals, temperature and humidity sensor is applied to the good dynamic characteristic could be obtained. In addition, the system was applied to the high power factor and low-frequency harmonics by maintaining the output load and grid to power to be supplied to a stable control could get a good result.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.326-328
• /
• 2015

Function of the window of the building is an environment of the room through the entry of solar radiation. It is vulnerable to significant energy conservation off the thermal efficiency. Also this summer, cooling costs are weighted because of excessive solar radiation. In this paper, we develop a windows automatic control system to use the indoor environmental information, such as home temperature, humidity, light intensity, solar radiation. The system collects the indoor environment information using a variety of sensor, using the collected information, and controls the motor to the system to control the window.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.231-237
• /
• 2017

This paper presents an implementation of a smart flowerpot which can adjust humidity and illumination automatically after monitoring the temperature, humidity, and illumination. We made a container of the flowerpot with a 3D printer and embedded a NodeMCU micro controller in it. We attached a temperature sensor, a humidity sensor, an illumination sensor, and a water pump to the NodeMCU. We developed a control program that adjusts humidity and illumination and ran it on the NodeMCU. Also we developed an Android application and set up an MQTT server. Using the MQTT server, the NodeMCU and the Android application can exchange messages which keep sensor values and commands. Using the Android application. the user can send the proper temperature, humidity, and illumination to the smart flowerpot and monitor the sensor values.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.45 no.5
• /
• pp.26-29
• /
• 2016

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.6 no.3
• /
• pp.166-171
• /
• 1977

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.287-293
• /
• 2006

Diamond-like carbon (DLC) film was deposited using benzene $(C_6H_6)$ by r. f-plasma assisted chemical vapor deposition. The tribological properties of the DLC film were tested by rotating ball-on-disc type tribometer isolated by a chamber. The tribological test was performed in air environment of relative humidity ranging from 0 to 90% in order to observe the tribological behavior of the DLC film with the change of humidity. We used steel ball and DLC coated steel ball to investigate the effect of the counterface material. Using steel ball, the friction coefficient of DLC film increased from 0.025 to 0.2 as the humidity increased from 0% to 90%. In case of DLC coated steel ball which didn't form the Fe-rich debris, the friction coefficient showed much lower dependence of humidity as 0.08 in relative humidity 90%. We confirmed that the high humidity dependence of the friction coefficient using steel ball resulted from the increase of debris size with humidity and the formation of Fe-rich debris by the wear of steel ball. And the friction coefficient was immediately dropped when the relative humidity changed from 90% to 0% during test using steel ball. From this result, we confirmed that the effect of the Fe-rich debris on the friction coefficient was that Fe element in debris formed the highly sensitive graphitic transfer layer to humidity.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.131-138
• /
• 2008

Humidity and strain were estimated for understanding the relation between humidity change by self-desiccation and shrinkage in high-performance concrete with low water binder ratio. Internal humidity change and shrinkage strain were about 10%, 4% and $320\times10^{-6}$, $120\times10^{-6}$ respectively on concrete with water binder ratio 0.3, 0.4 and from the results, humidity change and shrinkage represented the strong linear relation regardless of mixture. For specifying the relation on internal humidity change and autogenous shrinkage strain, shrinkage model was established which is driven by capillary pressure in pore water and surface energy in hydrates on the assumption of a single network and extended meniscus in pore system of concrete. This model and experimental results had a similar tendency so it would be concluded that the internal humidity change by self-desiccation in HPC originated in small pores less than 20 nm, therefore controlling plan on autogenous shrinkage might be focused on surface tension of water and degree of saturation in small pore.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.287-291
• /
• 2010

In this paper, we designed and implemented mobile object automatic system based on senor networks for telematics. For developing this system, we gather the various sensing data through wireless communication method using zigbee sensor networks and analyze them in monitoring equipment. And we enable the driver to recognize the car state information on the whole by interfacing analyzed data to telematics unit. And, we implemented automatic controller that can control temperature and humidity in car automatically by actuating air conditioner based on the data that was monitored throughout temperature sensor, humidity sensor and brightness sensor based on sensor networks.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.501-502
• /
• 2021

기존의 홈 시스템은 비용이 비싸며 공간적인 문제가 발생하고, 기능적으로 한계가 있다. '아두이노를 활용한 스마트홈 시스템'은 아두이노를 활용하기 때문에 비용적, 공간적 문제를 해결하고 여러 가지 가전제품을 환경에 맞춰 자동으로 작동하는 스마트 기능을 넣었다. 온, 습도 센서를 이용해 내부 온도가 설정 값보다 높으면 에어컨이 켜지고, 습도가 낮으면 자동으로 가습기가 작동한다. 또한, 창문에 부착된 UV센서를 통해 자외선 수치가 높아질 경우 자동으로 블라인드가 내려간다. 침실에 누워 잠들기 전, 불을 꺼야 하는 상황이 있다. 이런 경우, 직접 불을 끄러 가지 않고 침대 머리맡에 설치된 초음파 센서에 손을 가져다 대어 일정 거리 값 이하로 되면 자동으로 침실 불이 꺼진다. 그리고 거실에 설치 된 인체감지센서를 통해 불이 꺼진 어두운 거실에 움직임이 감지되면 자동으로 거실 불이 켜지게 된다. 이러한 자동 제어 기능을 블루투스와 연동된 스마트폰을 통하여 사용자 편의에 따라 수동적 제어가 가능하고, 거실에 설치된 ESP-32CAM을 통해 밖에서도 거실 내부를 실시간 확인할 수 있다. 이런 아두이노 스마트홈 시스템으로 사용자들에게 편리함과 안정성을 제공한다.