• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.88-88
• /
• 2003

• Journal of Animal Environmental Science
• /
• v.12 no.1
• /
• pp.7-12
• /
• 2006

Ammonia emission from swine production process originates from three major sources: manure storage facility, swine housing, and land application of manure. Most of the ammonia gas that are emitted from swine production operations is the by-product of aerobic or anaerobic decomposition of swine waste by microorganism. Knowing the ammonia emission rate is necessary to understand how management practices or alternative manure handling process could reduce impacts of this emission on the environment and neighbors. Ammonia gas emission from pig slurry is very difficult to predict because it is affected by many factors including wind speed of slurry surface, temperature or pH of the swine slurry, sort breed differences and classes, and diets. This study was carried out to effects of pH and temperature on ammonia gas emission from growing-finishing pig slurry. Treated far slurry in this study were pH and temperature. Results showed that pH of slurry variable changes 5, 6, 7, 8 upon an addition of NaOH and $HNO_3$, respectively. The temperature of the slurry which was contained in a water bath maintained at increasing levels ranging from 10 to $35^{\circ}C$. Ammonia emission rate of influenced pH and temperature such that the increase in pH or temperature resulted to an increase in ammonia emission. The ammonia gas was not detected at pH 5 and 6. Moreover, at a slurry of pH 8, the ammonia ranged from 28 to 60ppm and 8-29 ppm at slurry pH of 7 while temperature was 13 to $33^{\circ}C$. When slurry pH was>6, the ammonia emission was significantly increased according to rise in temperature in contrast to acid treatment of the pH. There was also a significantly increase in ammonia emission relative to slurry pH of 7 to 8. The above findings showed that to effectively reduce ammonia emission from slurry of growing-finishing pigs, the pH and temperature should be maintained a low levels.

• Journal of Animal Environmental Science
• /
• v.7 no.3
• /
• pp.155-164
• /
• 2001

Environmental factors such as $NH_3,\;H_2S,\;CO_2$, dust, temperature, and humidity in the animal house are a potential health hazard to humans and animals. Until now, most of measurement methods can only provide periodic results with low accuracy. A data acquisition system which can measure continuously and simultaneously $NH_3,\;H_2S,\;CO_2$, temperature, and humidity was developed and installed in two pig houses. Daily changes of environment for the pig-houses were investigated by the data acquisition system. In order to evaluate NH$_3$sensor, gas samples were obtained and NH$_3$concentrations were measured at nine positions; combinations of three positions(inlet, middle, and outlet) and three heights(0 cm, 40 cm, 150 cm). Ammonia concentration of 14.0 ~37.1 ppm for slurry pig-house is higher than that of 8.4~29.7 ppm for scraper pig-house, and there were no statistical differences among the positions. However, the concentration of $NH_3$at 150 cm was higher than thats of 0 cm and 40 cm.

• The Korean Journal of Rheology
• /
• v.9 no.1
• /
• pp.1-5
• /
• 1997

새로이 합성한 계면확성제와 대표적 분산용 계면활성제의 분산효과를 상호 비교해 보기 위하여 고농도 석탄-물 슬러리계에 대한 유변학ㅈ거 성질을 측정하였다. 0~$25^{\circ}C$ 온도 범위에서 얻어진 유동곡선으로부터 여러 가지 유동 파라미터를 구한 결과, PS가 상대적으로 structure factor, C2와 shear modulus, $\chi$2/$\alpha$2 값에 있어서 큰 감소를 보여 주엇으며 특히 shear modulus는 계면활성제의 종류에 따라 큰차이를 보여주었다. 이러한 현상을 PS가 다 가음이곤 고분자 전해질과 유사한 구조를 갖고있어서 석탄 입자에 흡착시 입자간 정전기적 반발과 입체장애를 초래하여 슬러리의 유동성을 향상시킨데 따른 결과로 해석된다.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.71-75
• /
• 2010

This study is experimented to observe an influence of experimental conditions on production characteristics of slurry ice by injection operating water to cooling plate. And at this experiment it used ethylene glycol-water solution and the concentration is 10 to 20wt%. The experimental apparatus was constructed of ethylene glycol-water solution and slurry ice storage tank, brine tank, pumps for ethylene glycol-water solution and brine circulating, a mass flow-meter, data logger for fluid temperature measuring and a vertical circular tube with single copper plate as test section. The experiments were carried out under various conditions, with mean velocity of fluid at the entry ranging from 1.0 to 2.0m/s and the cooling temperature of $-17^{\circ}C$ to $-10^{\circ}C$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.24.1-24.1
• /
• 2011

CMP (Chemical Mechanical Planarization)는 고직접도의 다층구조의 소자를 형성하기 위한 표면연마 공정으로 사용되며, pattern 크기의 감소에 따른 공정 중요도는 증가하고 있다. 반도체 소자 제조 공정에서는 낮은 비용으로 초기재료를 만들 수 있고 우수한 성능의 전기 절연성질을 가지는 산화막을 만들 수 있는 단결정 실리콘 웨이퍼가 주 재료로 사용되고 있으며, 반도체 공정에서 실리콘 웨이퍼 표면의 거칠기는 후속공정에 매우 큰 영향을 미치므로 CMP 공정을 이용한 평탄화 공정이 필수적이다. 다결정 실리콘 박막은 현재 IC, RCAT (Recess Channel Array Transistor), 3차원 FinFET 제조 공정에서 사용되며 CMP공정을 이용한 표면 거칠기의 최소화에 대한 연구의 필요성이 요구되고 있다. 본 연구에서는 알칼리성 슬러리를 이용한 단결정 및 다결정 실리콘의 식각 및 연마거동에 대한 특성평가를 실시하였다. 화학적 기계적 연마공정에서 슬러리의 pH는 슬러리의 분산성, removal rate 등 결과에 큰 영향을 미치고 연마대상에 따라 pH의 최적조건이 달라지게 된다. 따라서 단결정 및 다결정 실리콘 연마공정의 최적 조건을 확립하기 위해 static etch rate, dynamic etch rate을 측정하였으며 연마공정상의 friction force 및 pad의 온도변화를 관찰한 후 removal rate을 계산하였다. 실험 결과, 단결정 실리콘은 다결정 실리콘보다 static/dynamic etch rate과 removal rate이 높은 것으로 나타났으며 슬러리의 pH에 따른 removal rate의 증가율은 다결정 실리콘이 더 높은 것으로 관찰되었다. 또한 다결정 실리콘 연마공정에서는 friction force 및 pad의 온도가 단결정 실리콘 연마공정에 비해 상대적으로 더 높은 것으로 나타났다. 결과적으로 단결정 실리콘의 연마 공정에서는 화학적 기계적인 거동이 복합적으로 작용하지만 다결정 실리콘의 경우 슬러리를 통한 화학적인 영향보다는 공정변수에 따른 기계적인 영향이 재료 연마율에 큰 영향을 미치는 것으로 확인되었으며, 이를 통한 최적화된 공정개발이 가능할 것으로 예상된다.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.11
• /
• pp.46-52
• /
• 2004

CMP (Chemical-Mechanical Polishing) is a process in which both chemical and mechanical mechanisms act simultaneously to produce the planarized wafer. CMP process is an extensive usage and continuing high growth rates in the semiconductor industry. The understanding of the process, however, is much slower. The nature of material removal from the wafer is still undefined and ambiguous. Material removal rate according to the slurry flow rate is also undefined and ambiguous. Thus, in this study, the basic mechanism of material removal rate as slurry flow rate is defined in terms of energy supply and energy loss.

• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.26-29
• /
• 2011

A promising alternative technology is the potential use of ice slurries as a secondary refrigerant in conventional cooling process. Ice slurries behave almost like a liquid and can be pumped through pipes although the energy capacity of ice slurries per unit volume is considerably higher than that for chilled water or brine due to the latent heat capacity of the ice particles. To give the basic data for the design of cooling systems using ice slurries, experimental study has been conducted to find out the performance of the cooling coil of show-case with ice slurries. Despite the fact that ice slurries entering the cooling coil had at least $5^{\circ}C$ higher temperature than that of R22, it was still capable of providing a similar cooling performance than that obtained with R22.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.578-584
• /
• 2013

Ice slurry that is a mixture of fine ice crystals and liquid water is a widely used working fluid in the ice thermal energy storage system due to its flowability and large latent heat of fusion. Generally ice slurry is made from supercooled water. But the excessive supercooling causes the water to freeze even worse to block the pipe. Additionally large degree of supercooling of water degrades the efficiency of the ice thermal energy storage system. Therefore the effective method to control the phase change from supercooled water to ice slurry is needed. In this paper we experimentally studied a novel method to generate the ice slurry from the supercooled water using the ultrasonic vibration. It was found that the cavitation impact of supercooled water by ultrasonic vibration can help the generation of ice slurry.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.2
• /
• pp.125-128
• /
• 2014

The objective of this study is to investigate the changes in levels of odorous compounds in pig slurry during different seasons. Slurry from pens of finishing pigs was sampled every 4-wk and concentration of odorous compounds was analyzed. There was no difference in the range of phenols level (123 to 156 ppm) during spring (April to May), summer (July to August) and fall (October to November). The concentration of indoles was higher (P<0.05) during spring (14.3 ppm) than summer and fall (5.4~7.6 ppm). Level of BCFA ranging from 727 to 1,194 ppm was not different at any season. Among SCFA, there was no difference in propionic acid during any season but levels of acetic acid and butyric acid were highest (P<0.05) during spring season. Concentration of odorous compounds in pig slurry was highest during spring season. Interestingly, it tended to be lower during summer season compare to fall. This result might be due to relatively lower ventilation rate in order to maintain a constant temperature during spring season. Further study will be necessary to determine the relationship between the concentration of odorous compounds and ventilation system.