• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.489-497
• /
• 2019

A ship operating under rough sea conditions is exposed to a slamming load due owing to its motion relative to encountered waves. In the process of reentering the water, the ship's structure is temporarily subjected to an impact pressure. In particular, bow flare slamming often occurs in large container ships with a large flare angle, and can cause structural damage. Numerical simulations were performed in this study, and the results were compared with reliable experimental results. The simulation results were also used to estimate the bow flare slamming pressures on a container ship under head sea and oblique sea conditions. It was found that a maximum impact pressure of 475 kPa was generated near the 0.975 station of the container ship under a head sea condition.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.560-565
• /
• 2016

최근 대형 컨테이너선의 개발이 지속적으로 이루어짐에 따라 슬래밍에 의한 선수 및 선미의 구조안정성 문제가 대두되고 있지만 설계 단계에서 슬래밍에 대해 고려하기에는 현상의 복잡성으로 인해 어려움이 많았다. 이를 위해 KRISO에서 시행된 WILS JIP의 선수 단면 형상 및 선미 단면인 쐐기 형상으로 격자를 생성하여 EDISON CFD 다상유동 해석자를 통해 수치해석을 시도하였다. 기존 방식과 달리 계산 시간 절감을 위하여 격자 변형 기법을 적용하지 않고 모형 시험결과를 기반으로 한 유입류 조건을 설정하여 입수 충격 문제를 해석해보았다. 그 결과, 선미 형상의 경우 선행연구와 유사하게 실험 결과에 근접한 유체 충격력을 정량적으로 얻어낼 수 있었다. 선수 형상의 경우에서는 구상 선수로 인해 파생되는 센서 위치별 충격력의 변화를 확인할 수 있었으며, 실제 유동에 가까운 유동 형상과 슬래밍에 의한 충격력을 개략적으로 구할 수 있었다.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.77-82
• /
• 2015

Slamming means that the hull hits the waves and receives impact pressure. This slamming effect may cause harm to people and when you put the hull at risk. so it is very harmful for cargo safety. Therefor slamming impact pressure should be fully considered in ship designing. In this study the model of wedged type structure are produced aimed to simulate a free fall that the experiments were carried out on different weight and free fall height. The flow field has been obtained by 2-frame grey level cross correlation PIV(Particle Image Velocimetry) method and experiment was divided into water entry and water exit. The impact pressure of free fall structure by a pressure acquisition system apply to dewetron system. The angles between a model and the water surface are adapted $15^{\circ}$ respectively. The weight change of models was given as 1.5, 1.8 and 2.0kg. To study slamming phenomenon for free fall height the experiments were carried out by the free fall height of 100, 200 and 300mm. The experimental value of the impact pressure according to the changes in weight was increase impact pressure in proportion to the increase in weight and higher free falling height has also influenced the increase in impact pressures.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.6
• /
• pp.503-509
• /
• 2014

This paper describes the time-domain numerical method for prediction of slamming loads on a ship in waves using the strip theory. The slamming loads was calculated considering the relative vertical velocity between the instantaneous ship motion and wave elevation. For applying the slamming force on a ship section, the momentum slamming theory and the empirical formula-based bottom slamming force were used corresponding to the vertical location of wetted body surface. Using the developed method, the vertical bending moments, relative vertical velocities, and impact forces of S175 containership were compared in the time series for various section locations and wave conditions.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.99-109
• /
• 2000

Elastic dynamic responses analysis program for ship hulls considering slamming impact loads due to the voyage in large amplitude waves is developed. Ship hull structures are modeled by a thin-walled beam model in order to consider effects of shear deformation. The momentum slamming theory is used to derive nonlinear hydrodynamic forces considering intersection between wave particles and ship section. For the validation of the developed computer program, motions of a V-shaped simple section model and S-175 standard container model are calculated and analyzed. In each numerical example, time histories of relative displacement, velocity and vertical bending moment of a ship section are derived, considering the effect of slamming impacts in various wave conditions.ures near the free surface as well as the wake of the hydrofoil.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.3 s.153
• /
• pp.279-284
• /
• 2007

As a container vessel becomes larger, the bow flare becomes larger. The large bow flare structures are often subjected to dynamic pressure loads due to bow flare slamming occurring in rough seas. The aim of this paper is to investigate the characteristics of bow flare slamming pressure measured in a real voyage through the North Pacific Ocean. The characteristics of impact pressure load caused by slamming is addressed in terms of the pressure pulse-time history which involves rising time, peak pressure, decaying time and type of pressure decay. The values were presented using non-dimensional parameters.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.42 no.2 s.144
• /
• pp.26-40
• /
• 2005

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.193-193
• /
• 2018

현재 우리나라는 레저선박 및 중소형 선박, 연안소형어선에 대부분 사용되는 재질은 강도가 높고 내양품성이 우수한 FRP를 사용하고 있다. 하지만 FRP선박의 폐선 시 환경문제와 자원재활용, 선체중량에 연비 및 대기오염등에 의해 소형선박 중심으로 알루미늄선 전환이 이루어지고 있다. 본 연구에서는 알루미늄 선체가 적용된 멀티하우스보트에 알루미늄선 구조기준에 따른 슬래밍하중을 적용하여 구조 강도평가를 실시하였으며, 그 결과를 통해 각 부재별 민감도 평가를 수행하여 알루미늄 구조강도기준을 만족함과 동시에 중량 저감을 하여 실제 선박설계에 적용시키고자 한다.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.1
• /
• pp.22-27
• /
• 2017

This paper presents the results of an experimental study on the wedge slamming impact problem, including the fluid-structure interaction. A free drop test was performed to estimate the hydroelasticity. Three wedges were fabricated of 5 mm thick steel plate. The deadrise angles were $15^{\circ}$, $20^{\circ}$, and $25^{\circ}$. Plate thicknesses of 2 mm and 3 mm were used to determine the effect of the structural rigidity. The drop heights were 25 cm, 50 cm, 75 cm, and 100 cm. The pressure on a rigid part of the wedge and strain of the elastic plate were measured at four different locations. The pressure was compared using the Wagner theory and generalized Wagner theory.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.6
• /
• pp.534-540
• /
• 2012

The global performance of various ships estimated by simplified formulae of classification societies is compared with the numerical results by a strip-theory-based whipping analysis program including slamming impact(USLAM). Heave acceleration, pitch angle and the vertical acceleration are compared and the effectiveness of simplified formulae is evaluated. Four different ship models are used for comparison study, which include S175, Flokstra, 6000TEU and 8100TEU container ships. In order to verify the numerical results, the vertical bending moment of S175 is compared with the results of ITTC workshop data.