• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.119-125
• /
• 2017

In this paper, the characteristics and load carrying capacity of square pocket surfaces on a slider bearing are discussed for the thin film effect by the square pocket slider bearing. To study the lubrication, a Reynolds equation is used in this paper for the analysis of the slider bearing characteristics with square pocket surfaces. For numerical analysis, the central differencing scheme finite difference method is used. In a slider bearing with square pocket surfaces, the simulation dependent parameters such as pressure and load carrying capacity of the bearing can be acquired from the independent parameters, the slope of the slider bearing and number of pockets on the upper slider. These results can be acquired by the programmed softwar,e and they can be analyzed and stored in a sequential data file for later analysis. Furthermore, their pressure and load capacity distribution can be displayed easily by using the developed program with the Matlab GUI.

• Journal of KIISE:Software and Applications
• /
• v.29 no.8
• /
• pp.529-542
• /
• 2002

More precise program slices could be obtained by considering the semantic relations between variables of interest, compared to the existing slicing techniques considering only the syntactic relations. In this paper, we present specification-based slicing that allows a better decomposition of the program by taking a specification as its slicing criterion. A specification-based slice consists of a subset of program statements which preserve the behavior and the correctness of the original Program with respect to a specification given by a pre-postcondition pair. Because specification-based slicing enables one to focus attention on only those program statements which realize the functional abstraction specified by the given specification, it can be widely used in many software engineering areas. Of its possible applications, we show how specification-based slicing can improve the Process for extracting reusable parts from existing programs and restructuring complex programs for better maintainability.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.515-516
• /
• 2009

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.291-296
• /
• 1999

This study presents a method for determining stiffness and damping coefficients of 30% U slider-air bearings by using perturbation method, and shows that this method is more accurate than steady state method according to the comparison of those with the modal analysis method. Through a generalized lubrication equation, which based on linealized Boltzmann equation, the static and dynamic pressure distributions are calculated by finite volume method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.43-46
• /
• 1992

Measurement of straightness errors (vertical, horizontal),and angular error (roll, pitch, yaw) have been classified as difficult tasks in the machine tool metrology field. In this paper, computer aided measurement techniques are proposed using quadrant type photo pin diode. In the developed system, three photo diodes are mounted on the positioning table to detect the five degrees of movement error simultaneously. Outputs from the photo diode are analyzed in the computer and are displayed graphically.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.51-55
• /
• 1994

탄성체 동역학 해석에 있어서 변형을 나타내기 위해 사용되는 좌표로는 크게 절점좌표와 모우드좌표로 구분된다. 상대적으로 적은 좌표수를 사용하는 모우드좌표가 기계나 항공, 우주 분야에선 일반적으로 많이 사용된다. 그러나, 모우드를 선정함에 있어서의 기준의 불확실함 등으로 인해, 모우드좌표는 많은 경험을 요구하게 된다. 모우드좌표에 비해 많은 시간이 걸리지만, 절점 좌표의 사용은 누구나 쉽게 사용할 수 있음을 장점으로 한다. 본 연구에서는 두 가지 좌표로 탄성체 동역학의 운동방정식을 유도한 뒤, 슬라이더-크랭크 기구의 해석을 수행하여 그 결과를 서로 비교해 보고자 한다.

• Tribology and Lubricants
• /
• v.17 no.1
• /
• pp.64-71
• /
• 2001

This paper presents dynamic responses of disk flutter and bump in HDD slider. The slider is modeled for three degree-of-freedom systems, which are capable of lifting, pitching, and rolling motions. In numerical analysis, loads from air pressure, preload and static moments from the slider, and stiffness and damping coefficients of the suspension are considered for investigating the dynamic characteristics analysis. The numerical results are presented as functions of typical parameters such as a disk velocity, stiffness and damping coefficients of the suspension, and skew angle.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1992.06a
• /
• pp.60-65
• /
• 1992

액정은 합성에 의해서 만들어지는 고분자 화합물로서 액체와 고체결정의 중간적인 특성을 갖는 물질이다. 따라서 액체와 같이 점도를 갖고 유동하며 고체와 같이 외부하중에 대하여는 탄성변형을 하므로 일반 윤활유보다 월등한 윤활특성이 기대된다. 액정은 분자배열에 따라 smectics, cholesterics, Nematics의 세종류로 나뉘어지며 Smectics는 다시 Smectic A, Smectic C등으로 분류되며 관심대상은 Smectic A이다. 본 연구에서는 평판 슬라이더 베어링의 간극에 액정층이 형성되어있을때 액정의 탄성계수, 침투계수 및 벌어짐계수가 베어링부하, 액정층의 유동현상등에 미치는 영향을 비선형 유한 요소법을 사용하여 해석하고 레이놀즈 이론해와 비교하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.94-98
• /
• 1996

The static characteristics of air-lubricated slider bearing were performed using direct numerical method. The equations of motion of slider bearing are solved simultaneously with the Reynolds equation for three degrees of freedom. The molecular rarefaction effect is considered. The models implemented include the first-order slip, the second-order slip, and the Boltzmann equation model derived by Fukui and Kaneko(FK model)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.437-442
• /
• 2013

In recent times, surface texturing methods have been widely applied to reduce friction and improve the reliability of machine components such as parallel thrust bearings, mechanical face seals, and piston rings. In this study, a numerical analysis is carried out to investigate the effect of uniformly spaced hemispherical dimples on the lubrication characteristics of a slider bearing using a commercial computational fluid dynamics (CFD) code, FLUENT. The pressure distributions, load capacity, leakage flowrate, and friction force are strongly affected by the dimple diameter and the number of dimples. In particular, the load capacity and friction force decrease linearly with the dimple density whereas the leakage increases. These results can be used for designing the optimum dimple characteristics in order to improve the lubrication performance of slider bearings, for which further studies are required.