• 한국항공우주학회지
• /
• 제47권4호
• /
• pp.289-299
• /
• 2019

자세제어 M&S(Modeling & Simulation)는 모델링 정밀도에 따라 간단한 자세제어 알고리즘 설계부터 실제 탑재 소프트웨어 검증까지 활용될 수 있다. 본 논문은 CMG 기반 위성 자세제어를 위한 M&S 소프트웨어를 소개한다. 개발된 소프트웨어는 크게 6자유도 모델링과 자세제어 알고리즘으로 나뉠 수 있다. 6자유도 모델링은 CMG 구동기 모델링과 우주환경 모델링(궤도외란/자세외란)을 포함한다. 자세제어 알고리즘은 CMG 모터속도 제어기(내부루프)부터 토크명령생성 및 스티어링 법칙(외부루프)을 포함한다. M&S는 하위 레벨인 CMG 모터제어부터 상위 레벨인 지구관측임무 수행까지 단계적으로 수행되며, 적용 레벨에 따라 3개 모듈로 나뉜다. 본 M&S 소프트웨어는 초기 자세제어 알고리즘 개발을 목표로 개발되었는데, 향후 상세한 위성체/구동기 모델링 및 우주환경 모델링을 반영해 점차 활용 범위를 넓힐 수 있을 것으로 기대된다.

• 한국ITS학회 논문지
• /
• 제20권1호
• /
• pp.146-159
• /
• 2021

본 연구는 고령운전자 운전특성 파악을 위한 실증적 분석의 일환으로 차량 시뮬레이터를 이용하여 고령운전자의 주행특성을 파악하고자 하였다. 이를 위해 기존연구 고찰에서 고령운전자의 주행특성 요소를 파악한 후, 시뮬레이션 환경을 구축하고 일반 운전자와의 주행 비교를 통해 고령자 운전특성을 명확히 도출하고자 하였다. 실험 결과 고령운전자는 주행속도, 운전조작(브레이크, 스로틀, 스티어링 작동) 등 차로편측을 제외한 모든 항목에서 일반 운전자와는 다른 주행특성을 보이는 사실을 확인하였으며, 주요 특성으로 차로변경 시 속도유지 및 적정 차간간격 확보가 어렵고, 돌발 상황 발생 시 정지거리와 소요시간이 더 많이 필요한 것으로 확인되었다. 결과적으로 고령운전자 주행거동의 일의적 특성을 입증할 수 있었고, 도로설계, 고령자 관련 교통정책 수립 등에 유효한 지침을 제공할 수 있을 것으로 기대된다.

• 한국전자통신학회논문지
• /
• 제18권3호
• /
• pp.427-432
• /
• 2023

본 연구에서, MEC(: Multi-access Edge Computing)가 Wave, Lte, 5G 망에서 V2X(: Vehicle to Everything) 를 적용한 자율 자동차의 다양한 시험을 위해서 Cloud 서비스망 구성이 제안되고, MEC App(:Application)은 특정 지역에서 두 가지 도메인(사업자(KT, SKT, LG U+), 망 형태(Wave, LTE(3G 포함), 5G))의 V2X 서비스 기능 시험 검증을 적용하였다. 국내 운영업체(SKT, KT, LG U+ 그리고 Wave)의 4G 망에서, MEC는 독립적인 망 기능을 가져가기 위한 목적으로 V2X 기능 블록과 Traffic Offloading을 통한 개선 효과를 정리하였다. 그리고 5G 망의 V2X VNF에서 높은 수준의 QoS로 값으로, Traffic Steering기능의 시나리오가 목적지별 트래픽 경로상에서 입증되었다.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.104-112
• /
• 2006

The influence of tire belt angle on the Plysteer Residual Aligning Torque(PRAT) and the cornering stiffness by the FEM has been studied. The PRAT is a performance factor of the tire about vehicle pull, and the cornering stiffness has relation to vehicle steering response of outdoor test. To validate FE model for analysis, simulation data for both the static stiffness(vertical, lateral) and the PRAT have been compared with the experimental data. In addition to the characteristics of the PRAT and the cornering stiffness due to the tire belt angle, rolling and cornering contact characteristics have been studied. The tendency of the PRAT and the cornering stiffness due to the belt angle can be used as a guide line for the tire design in relation to vehicle pull and vehicle steering response.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.335-338
• /
• 2005

Starting with the development of environmentally friendly electric controlled engine, sensors have played an increasing role in automotive technology. Electric power steering (EPS) systems are more and more replacing hydraulic systems. To improve fuel economy, the power assistance is provided by an electric drive. In this paper, development of a unique torque sensor for EPS is introduced. A capacitive type torque sensor is concluded to be suitable for EPS because its output is accurate, linear and robust against the variance of temperature, and patents have not applied so much.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.166-174
• /
• 2002

Power steering systems far automobile are becoming ever more popular because they reduce steering efforts of the drivers, especially during parking lot maneuver. In this paper, the controller of the motor driven hydraulic power steering(MDHPS) has been designed and developed. This system uses a power source of DC motor instead of engine power source for power steering drive oil pump. The developed MDHPS system is accomplished a highly sensitive power steering resulted from electronic control under variable driving condition. Furthermore, this system is more improvement than type of engine driving far fuel economy.

• Tribology and Lubricants
• /
• 제19권6호
• /
• pp.335-341
• /
• 2003

Recently, the automotive industry is being developed rapidly. On this, a demand of high quality performance­test­machine is increased too. But it is progressive technology that must be combined hydraulic, mechanic and electronic technologies. To construct this system, the design of oil hydraulic circuit, interface skill between sensor and personal computer, data acquisition & display system and integrated control are very important skill. Moreover, reliable data is obtained with vacuum system and complex heat exchange system. Therefore, in this study, we designed a performance­test­machine by using above key technologies and we also made a integrated PC control system using personal computer which is more progressive and flexible method than PLC control.

• 대한기계학회논문집A
• /
• 제29권6호
• /
• pp.809-814
• /
• 2005

The goal of this paper is to minimize the weight of the T-structure supporting steering system in reducing the vibration level on steering wheel which could be amplified by the resonance. Presently, requirements for reducing noise, vibration and harshness (NVH) in automotive area are more stringent than ever. One of them is the vibration of steering system which occurs sometimes at high speeds or when the engine is idling. Besides, the reduction of weight is also one of requirements for improvement of vehicle performance. This paper used the micro genetic algorithm as an optimization method to satisfy above two requirements. The whole T-structure assembly including steering column was used for frequency analysis.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.66-75
• /
• 1998

In many case of optimal design and sensitivity analysis, obtaining of transfer function between input and output variables is a difficult and time-consuming problem. The bond graph modeling is a method that is used for making it easy to analyze complex systems composed of mechanical and electrical parts. It gives us a simple and systematic tool to get state-space equations easily. And we can obtain the transfer function graphically using bond graph and Mason's rule. This paper shows how bond graphs are converted to block diagram and how Mason's rule is applied. And the simple direct method to obtain transfer function from bond graph is introduced. As a example, induction of transfer function of electric power steering composed of mechanical and electrical parts will be done.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.69-74
• /
• 2013

LKAS(Lane Keeping Assistance System) main function is to support the driver in keeping the vehicle within the current lane. Therefore, this system is able to reduce the driver workload with assisting the driver during driving. In this paper, we presented on study for test procedures and evaluation methods of the LKAS. The vehicle test conducted on straight road, left curve, right curve and four different types of lane under various vehicle speeds. This study proposed the LKAS system test procedures and methods that we are able to identify LKAS driving mechanism and performance.