• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.200-210
• /
• 2000

본 연구에서는 고속의 원심압축기에서 스톨 발단에 관한 연구를 수행하였다. 스톨을 일으키는 요인과, 스톨이 발생하기 전에 이를 미리 경고할 수 있는 방법을 주된 연구 주제로 삼았다. 원주방향으로 균일하게 분포된 8개의 고속응답 압력변환기를 사용하여 순간압력을 측정하였으며, 이 신호를 공간 푸리에 변환(space Fourier transform)을 사용하여 스톨의 발단을 알리는 신호를 측정하였고, 회전하는 파의 에너지(Traveling Wave Energy) 방법을 사용하여 스톨을 미리 경고하는 방법에 대하여 연구하였다. 회전하는 파의 에너지 방법은 스톨을 경고하는 데 좋은 성능을 보였으며, 저속에서는 약 임펠러 100회전, 중간속도에서는 약 200회전, 그리고 고속에서는 약 임펠러 1000회전의 경고시간을 보였다. 그리고 스톨 발단 근처에서 공간 푸리에 계수의 위상이 임펠러 주파수의 속도로 선형적인 증가를 보이는 구간이 나타났으며, 또한 임펠러 주파수의 스펙트럼이 스톨로 접근하면서 증가하는 것으로부터, 임펠러 주파수가 스톨을 일으키는 중요한 요인으로 작용함을 알 수 있었다. 또한 임펠러의 회전속도에 관계없이 스톨로 접근하면서 임펠러 주파수의 스펙트럼이 증가하므로, 이 값이 스톨을 경고하는 방법으로 사용될 수 있음을 보였으며, 약 임펠러 2n회전의 경고시간을 얻을 수 있었고, 임펠러의 속도가 빠를수록 긴 경고시간을 얻었다. 이 방법의 개발로 하나의 센서의 측정만으로도 효과적으로 스톨을 경고할 수 있는 기반을 마련하였다.

• 월간낙농육우
• /
• s.127
• /
• pp.27-32
• /
• 1992

지난 10월8일은 우리가 후리스톨(Free Stall) 우사에 소를 입식한지 정확히 일년이 되던 날이었다 당시만 해도 후리스톨 우사에 대한 정확한 사육보고서가 발표된 적이 없었기에 많은 시행착오를 겪을 우려가 있었다. 지금 발표하는 이글은 필자가 틈바닥(Slatted Floor)이 설치된 후리스톨 우사에서 사계절 동안 소를 사육해 본 결과 겪었던 시행 착오와 우군들의 반응,그리고 후리스톨에서의 자동화및 사양관리등을 담고 있다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1445-1450
• /
• 2001

Stall inception in a high-speed centrifugal compressor has been examined. The main objective was to find stall precursor and to develop a reliable stall warning method. For stall warning, a method which uses the spectrum at impeller frequency is suggested. The use of the spectrum at impeller frequency as a stall warning method showed a warning time of about two hundreds impeller revolutions. This method uses only one sensor that it has made the stall warning method more useful. And the well-known traveling wave energy method proved to be a good method for stall warning also in a high-speed centrifugal compressor. The warning time was about one hundred impeller revolutions at lower speeds, and about one thousand impeller revolutions at higher speeds. The stall warning methods used here were found to be robust and reliable. Therefore, it seems to be promising to set up a reliable stall avoidance control based on this analysis.

• Korean Journal of Logic
• /
• v.12 no.2
• /
• pp.31-58
• /
• 2009

This paper defends Stalnaker's theory of indicative conditionals. His theory consists of selection functions and pragmatic constraints. The selection function takes a certain possible world(W) and a proposition(A) to yield a possilble world that is similar to W and in which A is true. And the pragmatic constraints plays role to make selection functions apply just to indicative conditionals. According to Stalnaker, as indicative conditionals has strong truth-value, uncontested principle always holds but passage principle does not always hold. However, his theory can explain why passage principle sometimes holds by means of pragmatic constraints. Also, this paper argues that Stalnaker's theory is the most acceptable one among others, by replying to criticisms suggested by Adamsians and the problem raised by Gibbard and other criticisms.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.1067-1078
• /
• 2003

This study was designed to determine the effect of gestation housing and parity on the farrowing performance and behaviour of sows during pregnancy, farrowing and lactation periods. Total 18 Duroc sows were randomly assigned after 4 weeks of gestation to either an individual gestation stall or a groups of three with pen gestation system for three parities(1st, 2nd${\sim}$3rd, and 4th${\sim}$5th). Approximately 7 days before predicted farrowing date, sows were transferred to farrowing crates where they remained until 21 days post-partum. Behaviour was recorded on day 60 and 90 of pregnancy for 24 hours, on day of farrowing for farrowing duration and on day 10 of lactation for 2.5 hours in the farrowing crate. The results obtained from this study were summarized as follows: On 60 and 90 day of pregnancy, all sows in both groups made attempts for ventral lying more than for other postures. Sows in the group gestation pen spent more time on walking than those in individual gestation stall(p<0.01); however, the group housed sows were spent less time on drinking than the individually housed sows(p<0.01). There was no significant difference between gestation housings in the occurrence of stereotypy of pregnant sows. On day 60 of pregnancy, sows in the individual gestation stall showed the highest frequency of vacuum chewing and head weaving. However, floor licking and bar licking behaviours were highest in day 90 pregnant sows individually housed. The sows individually housed during the gestation period spent more time on sitting and eating on the day of farrowing in the farrowing crate than the sows group housed. On day 10 of lactation in the farrowing crate, the group housed sows during the gestation period made significantly more attempts for ventral lying than sows individually housed. In conclusion, the occurrence of stereotypy of sows during the gestation and lactation did not differ between gestation housings and farrowing performance of sows during the gestation period was not affected by gestation housing. Thus, the group housing for pregnant sows is a feasible means to improve welfare of sows and to increase the normal behaviour of sows.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.739-748
• /
• 1992

A CGM iterative systolic algorithm to solve large sparse linear systems of equations is presented. For implementation of the algorithm, a systolic array using the stripe structure is proposed. The matrix A is decomposed into a strictly lower triangular matrix, a diagonal matrix, and a strictly up-per triangular matrix, and the two formers and the tatter· are concurrently computed by different linear arrays. Hence, the execution time of this approach Is reduced to half of the execution time of the that a linear array is used. computation of the Irregularly distributed sparse matrix can be executed effectively by using the stripe structure.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.1
• /
• pp.52-57
• /
• 2012

Stall inception characteristics are researched to understand stall well. To realize different stall inception patterns, IGV stagger angle was changed. At design IGV stagger angle, spike, which is short length scale, is observed. Decreasing IGV stagger angle, spike changes to mode, which is long length scale, and further decreasing get multi cell. Compressor maps for each IGV stagger are shown to compare different stall inceptions. The characteristics of both spike and mode are confirmed in this experiment. Furthermore, transient from spike to mode is find. multi cell has 4cells and is little bit faster than mode. and multi cell shows 2nd, 3rd characteristics on compressor map.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1436-1444
• /
• 2001

Stall inception in a high-speed centrifugal compressor has been examined. The main objective was to find stall precursor and to develop a reliable stall warning method. Eight equally spaced fast-response pressure transducers in the inducer detected the spatial structure of small amplitude perturbations, via spatial Fourier transform, as stall is approached. Near the stall inception point, the phase of spatial courier coefficients increased linearly with the speed of impeller relation for several impeller revolutions at all test speeds, and the spectrum at impeller frequency increased as stall is approached. These are the clear evidences that the impeller frequency participates in the stalling process.

• Journal of Wind Energy
• /
• v.13 no.1
• /
• pp.15-20
• /
• 2022

In this paper, a power control algorithm for a 30 kW horizontal-axis lift-type stall control wind turbine was developed. The control algorithm consists of three different control strategies for three different control regions. At a wind speed that is much lower than the rated wind speed, it uses a generator speed, generator torque lookup table to track the maximum power coefficient of the rotor. At a wind speed that is higher than the rated wind speed, multiple closed control loops are used to track the rated power. Also, a closed-loop control between the two control regions is used to maintain the rated speed of the rotor. The proposed control algorithm was validated by dynamic simulations using Bladed. Based on the simulation results, it was found that the proposed algorithm works properly in three control regions of the wind turbine. The proposed control algorithm is expected to increase the capacity factor of stall-regulated small wind turbines.

• 월간낙농육우
• /
• s.121
• /
• pp.43-47
• /
• 1992