• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.26-31
• /
• 1992

본 연구에서는 ABBAQUS/EXPLICIT CODE를 이용하여 자동차용 휠 디스크의 성형성을 파악하기 위한 모델링 방식과 컴퓨터 시뮬레이션의 결과인 스프링백, 잔류응력, 두께 변화, 변형률 등을 소개하기로 한다. 컴퓨터 시뮬레이션을 휠 디스크 스탬핑에 이용한 경우 스탬핑시 발생하는 여러현상을 쉽게 예측할 수 있으며, 또한 금형의 Geometry 결정 및 홀더와 펀치의 작용하중 등 금형 설계시 요구되는 데이타 확보가 매우 용이하다.

• Journal of the KSME
• /
• v.33 no.1
• /
• pp.47-65
• /
• 1993

판재의 스탬핑 성형성평가를 위해 소재제조업체와 자동차업체에서 널리 사용되고 있는 2,3개의 대표적인 모사실험과 컴퓨터 모드의 실험에 대하여 소개하였고 각각의 특징들에 대하여 논하 였다. 스탬핑금형의 개발과 연속생산공정에 있어서 성형한계선은 원형그리드해석기법과 함께 핀재의 성형난이도 평가 및 불량원인 규명과 조치에 유용하게 사용가능하다. 또한 돔장출실험과 평면변형장출실험에서 각각 얻어지는 한계돔높이와 한계펀치높이는 입하코일에 대한 스탬핑성 공여부의 사전확인 및 연속생산 공정에 대한 통계적 품질관리수단으로 활용하면 스탬핑공정에 서의 불량률감소 및 생산성향상에 기여할 수 있을 것으로 생각된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.6
• /
• pp.797-803
• /
• 2010

A vehicle door impact beam made of a thin sheet of steel has been constructed using hot stamping technology with the aim of ensuring occupant safety in the event of a side collision. This technology has been used to increase the strength of the vehicle body parts and to reduce the weight of the door impact beam as well as the number of work processes. Mechanical tests were performed to determine the material properties of the hot-stamped specimen and the results of the tests were used as input data in stamping and structural simulation in order to obtain the optimal design of door impact beam. The strength of the hot-stamped door impact beam increased to a value that was 102% higher than that of conventional pipe-shaped door impact beam. A weight reduction of 34% was also achieved.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.841-849
• /
• 2013

In this study, a 2-step stamping model with an additional 1st stamping tool is proposed to reduce stamping flaws in the curved parts of a dimple in a nuclear fuel spacer grid. First, the strains of curved part of dimple are characterized via a comparison with strain solutions in pure bending. A reference 2D finite element (FE) model of 1-step stamping is then established, and the corresponding maximum strain is obtained. By varying the values of design variables of the 1st stamping tool in the 2-step stamping model, FE solutions are obtained to express the strain as a function of process variables, which provides the optimum values of process variables. Finally, applying these optimum values to a 3D FE model, we demonstrate the enhanced formability of the proposed 2-step stamping model.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.5
• /
• pp.22-30
• /
• 1993

본 연구는 MSC/DYNA EXPLICIT CODE를 이용하여 자동차용 샤시 프레임의 성형성을 파악하기 위한 모델링 방식과 단계별 변형양상, 컴퓨터 시뮬레이션의 결과인 스프링백, 잔류응력, 두께변화, 변형률 등을 소개하기로 한다. 1. 프레임 스탬핑 개요. 2. 해석 모델 및 성형조건. 3. 해석결과 및 고찰.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.312-317
• /
• 2005

In this study, using the stamping, analysis program, PAM STAMP, applied to the drawing result of springback analysis and draw analysis with applying on the best design planning as many times simulations from the initial stage of the die developing of automotive panels. Especially, after inspecting the design method with stamping analysis and springback analysis, write about the die development examples, using CADCEUS which is the software revising the amount of springback.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.213-214
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.895-896
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1351-1352
• /
• 2011

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.25-28
• /
• 2004

A fracture was generated by change of clearance and deterioration of material properties on the sheet metal through temperature. This paper describes the results of a prediction about the temperature of the sheet metal during continuous stamping process, because the temperature increase of the sheet metal has a detrimental effect on formability. To analyze the temperature increase of the sheet metal during continuous stamping process, tensile and friction tests were performed from room temperature to 300$^{\circ}C$ at warm condition in this study. As temperature increase, tensile strength, elongation, strain hardening exponent and anisotropy coefficient for each specimens were decreased. On the other hand, friction coefficients were increased. From the FE-simulation results, temperature upward tendency was identified on dies and sheet metal. These observations are rationalized on the basis of the material properties, friction coefficient vs. temperature relationship for the sheet.