• Journal of KIISE:Databases
• /
• v.35 no.1
• /
• pp.54-66
• /
• 2008

A spatio-temporal join is an expensive operation that is commonly used in spatio-temporal database systems. In order to generate an efficient query plan for the queries involving spatio-temporal join operations, it is crucial to estimate accurate selectivity for the join operations. Given two dataset $S_1,\;S_2$ of discrete data and a timestamp $t_q$, a spatio-temporal join retrieves all pairs of objects that are intersected each other at $t_q$. The selectivity of the join operation equals the number of retrieved pairs divided by the cardinality of the Cartesian product $S_1{\times}S_2$. In this paper, we propose aspatio-temporal histogram to estimate selectivity of spatio-temporal join by extending existing geometric histogram. By using a wide spectrum of both uniform dataset and skewed dataset, it is shown that our proposed method, called Spatio-Temporal Histogram, can accurately estimate the selectivity of spatio-temporal join. Our contributions can be summarized as follows: First, the selectivity estimation of spatio-temporal join for discrete data has been first attempted. Second, we propose an efficient maintenance method that reconstructs histograms using compression of spatial statistical information during the lifespan of discrete data.

• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.384-391
• /
• 2005

A polymer optical microring resonator, which is laterally coupled to a straight bus waveguide, has been proposed and demonstrated using a nanoimprint technique. The propagation loss of the ring waveguide and the optical power coupling between the ring and bus waveguides was calculated by using a beam propagation method, then the dependence of the device performance on them was investigated using a transfer matrix method. We have especially introduced an imprint stamp incorporating a smoothing buffer layer made of a silicon nitride thin film. This layer played an efficient role in improving the sidewall roughness of the waveguide pattern engraved on the stamp and thus reducing the scattering loss. As a result the overall Q factor of the resonator was greatly increased. Also it reduced the gap between the ring and bus waveguides effectively to enhance the coupling between them, without relying on the direct writing method based on an e-beam writer. As for the achieved device performance at the wavelength of 1550 nm, the quality factor, the extinction ratio, and the free spectral range were ~103800, ~11 dB, and 1.16 m, respectively.

• Tribology and Lubricants
• /
• v.32 no.3
• /
• pp.75-81
• /
• 2016

Future electronics such as electronic paper and foldable cellphone are required to be flexible and transparent and should have a high performance. In order to fabricate the flexible electronics using flexibility transfer process, techniques for transferring various devices from rigid substrate onto flexible substrate by elastomeric stamp, have been developed. Adhesion between the elastomeric stamp and various devices is crucial for successful transfer process. The adhesion can be controlled by the thickness of the stamp, separation velocity, contact load, and stamp surface treatment. In this study, we fabricated the bump shape stamp consisting of a UV-curable polymer and investigated the effects of curing condition, separation velocity, and contact load on the adhesion characteristics of bumps. The bumps with hemispherical shape were fabricated using a dispensing process, which is one of the ink-jet printing techniques. Curing conditions of the bumps were controlled by the amount of UV irradiation energy. The adhesion characteristics of bumps are evaluated by adhesion test. The results show that the pull-off forces of bumps were increased and decreased as UV irradiation energy increased. For UV irradiation energies of 300 and 500 mJ/cm², the pull-off forces were increased as the separation velocity increased. The pull-off forces also increased with the increase of contact load. In the case of UV irradiation energy above 600 mJ/cm², however, the pull-off forces were not changed. Therefore, we believe that the bump shape stamp can be applied to roll-based transfer process and selective transfer process as an elastomeric stamp.

• Clean Technology
• /
• v.28 no.4
• /
• pp.323-330
• /
• 2022

Microfluidic paper-based analytical devices (μPADs) have recently been in the spotlight for their applicability in point-of-care diagnostics and environmental material detection. This study presents a double-sided printing method for fabricating 3D-μPADs, providing simple and cost effective metal ion detection. The design of the 3D-μPAD was made into an acryl stamp by laser cutting and then coating it with a thin layer of PDMS using the spin-coating method. This fabricated stamp was used to form the 3D structure of the hydrophobic barrier through a double-sided contact printing method. The fabrication of the 3D hydrophobic barrier within a single sheet was optimized by controlling the spin-coating rate, reagent ratio and contacting time. The optimal conditions were found by analyzing the area change of the PDMS hydrophobic barrier and hydrophilic channel using ink with chromatography paper. Using the fabricated 3D-μPAD under optimized conditions, Ni²⁺, Cu²⁺, Hg²⁺, and pH were detected at different concentrations and displayed with color intensity in grayscale for quantitative analysis using ImageJ. This study demonstrated that a 3D-μPAD biosensor can be applied to detect metal ions without special analysis equipment. This 3D-μPAD provides a highly portable and rapid on-site monitoring platform for detecting multiple heavy metal ions with extremely high repeatability, which is useful for resource-limited areas and developing countries.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.269-269
• /
• 2016

최근, 플렉서블 광전자소자 제작 기술의 눈부신 발전으로, 기존의 평면형 이미지 센서가 가지고 있는 여러가지 한계를 극복하기 위해 곡면형 이미지 센서 제작에 대한 다양한 연구가 진행되고 있다. 리소그래피, 물질 성장, 도포, 에칭 등의 대부분의 반도체 공정은 평면 기판에 기반한 공정 방법으로 곡면 구조의 이미지 센서를 제작하기에는 많은 어려움이 있다. 본 연구에서는 곡면형 이미지 센서의 제작을 위해 곡면 구조 위에서의 직접적인 공정 대신 평면 기판에서 단결정 실리콘을 이용해 전사 인쇄가 가능하고 수축이 가능한 초박막 구조의 이미지 센서를 제작한 후 이를 떼어내는 방식을 이용하였다. 이온 주입 및 건식 식각 공정을 통해 평면 SOI (Silicon on Insulator) 기판 위에 단일 광다이오드 배열 형태의 소자를 제작한 후 수 차례의 폴리이미드 층 도포 및 스퍼터링을 통한 금속 배선 공정을 통해 초박막 형태의 광 검출기를 완성한다. 이후 습식 식각 및 폴리디메틸실록산(PDMS) 스탬프를 이용한 전사 인쇄 공정을 통해 기판으로부터 디바이스를 분리하여 변형 가능한 형태의 이미지 센서를 얻을 수 있다. 이러한 박막형 이미지 센서는 유연한 재질로 인해 수축 및 팽창, 구부림과 같은 구조적 변형이 가능하게 되어 겹눈 구조 카메라, 튜너블 카메라 등과 같이 기존 방식의 반도체 공정으로는 구현할 수 없었던 다양한 이미징 시스템 개발에 적용될 수 있을 것으로 기대된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1511-1513
• /
• 2005

The polymer-light emtting diodes(PLEDs) were comprised a design of OLED array, process develop by using ITO thin glass, and fabrication of PDMS stamp by using nanocontact printing. In the study, we describe a different approach for building OLEDs, which is based on physical lamination of thin metal electrodes supported by a PDMS stamp layer against an electroluminescent organic. We develop that devices fabricated in this manner have better performance than those constructed with standard processing techniques. The lamination approach avoids forms of disruption that can be introduced at the electrode organic interface by metal evaporation and has a reduced sensitivity to pinhole or partial pinhole defects. Also, it is easy to build patterned PLED with feature sizes into the nanometer regime. This method provides a new route to PLED for applications ranging from high performance displays to storage and lithography systems, and PLED can used for organic electronics and flexible display.

• The Journal of the Korea Contents Association
• /
• v.7 no.10
• /
• pp.27-35
• /
• 2007

Radio Frequency Identification(RFID) technology is set to play an essential role in object tracking or supply chain management systems. New challenges for RFID data management are needed in the RFID applications. RFID data are generated quickly and automatically, and can be used for object tracking, or for real-time monitoring. These applications are mostly associated with the timestamps when the events happen. In this paper, we propose a temporal RFID data model to maintain the history of events and state changes and to monitor the states of RFID objects. Also we propose data filtering method of non active data based on temporal RFID data model. This data model involves essential basic operations for RFID data. We show increased query performance through the data filtering method of non active data.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.313-320
• /
• 2003

This paper design and implements a synchronized agent mechanism that be able to synchronize SFT (Slow Frequency Transaction) data among e-business processes in distributed environment. This synchronized agent system is adopted to use mobile agent to guarantee the interoperability of the distributed processes and to solve some problems at the client/server architecture and proposes a policy to synchronize data of e-business processes on the any platforms of distributed heterogeneous systems. The proposed synchronization policy is based on the time-stamp transaction with the system priority on the unicasting transportation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1153-1160
• /
• 2002

So far, the main applications of mobile client are querying data. However, we need a new mechanism to update data at a mobile client as mobile systems are advanced and extended. So, we present a optimistic concurrency control to schedule mobile transactions may include update operations.'rho read-only transactions can be terminated without sending information to a server, and update transactions are terminated by validating at a server. In our method, we can reduce the additional aborts by using a timestamp ordering and serialization graph test mechanism rather than using only conflict information between concurrent transactions.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.239-244
• /
• 2011

Nano Imprint Lithography(NIL) is technique for copying a pattern from stamp with nano size pattern in order to replicated the materials. It is very important to demold in order to make NIL process effectively. Self Assembled Monolayers(SAM) coater is manufactured by means of decreasing surface energy with the stamp surface treatment to improve release characteristics. Manufactured device contains tilting and rotation option for increasing process life time by coating on the sidewall of the pattern in stamp. The stamp coated with optimized tilting angle $30^{\circ}$ and rotation speed of 10rpm has more imprinting cycles than the stamping coated without tilting and rotation. Effective SAM coating on the sidewall of the pattern in stamp will improve by 50% of process life time.