• KSBB Journal
• /
• v.16 no.3
• /
• pp.281-285
• /
• 2001

Biofiltration of volatile organic compounds (VOCs) was performed for 80 days in a biofilter packed with peat. The empty bed residence time was 3.2 min. for a gas mixture of isoprene, dimethyl sulfide, chloroform. benzene, trichlorethylene, toluene, m0xylene, o-xylene and styrene. After 34 days of acclimatization the removal efficiency for a 83 g/㎥ gas input was 93% at $25^{circ}C$ and 73% at $45^{circ}C$, respectively. The maximum cell density at $25^{circ}C$ was 1.12$\times$10(sup)8 cells/g. Removal efficiencies of m-xylene and toluene (91%) were better than that of benzene (86%). The first quarter of the packed column removed 60% of the incoming VOCs.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.21-27
• /
• 2009

Resins were synthesized by mixing 1-aza-15-crown-5 macrocyclic ligand attached to styrene (a hazardous material) divinylbenzene (DVB) copolymer with crosslink of 1％, 2％, 5％ and 20％ by a substitution reaction. The characteristic of these resins was confirmed by the content of chlorine, element analysis, thermogravimetric analysis (TGA), surface area (BET), and IR-spectroscopy. The effects of pH, time, dielectric constant of solvents and crosslink on adsorption of metal ions by the synthetic resin adsorbent were investigated. The metal ion was showed a fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order of uranium ($UO_2^{2+}$) > manganese ($Mn^{2+}$) > praseodymium ($Pr^{3+}$). The adsorption was in the order of 1％, 2％, 5％, and 20％ crosslink resin and adsorption of resin decreased in proportion to the order of dielectric constant of solvents.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.527-532
• /
• 2016

The effects of gas velocity and solid circulation rate on the axial solid holdup distribution have been determined in a 10 mm-I.D. ${\times}$ 800 mm-high circulating fluidized bed plasma reactor under reduced pressure (1torr). Polystyrene polymer powder and nitrogen gas are used as solid and gas materials respectively. The change of solid circulation rate by a large gas flow rate of the riser (40~80 sccm) is also possible by a relatively small gas flow rate of the solid recirculation part (6.6~9.9 sccm). The solid circulation rate in the reactor under reduced pressure increases with increasing aeration velocity in the solid recirculation part. The axial solid holdup in the riser decreases from the dense at the bottom to the dilute phase at the top section of the riser. Solid holdups at the axial positions in the riser increase linearly with increasing solid circulating velocity. From these results, we could determine the position of plasma load for good plasma ignition, maintain and plasma reaction.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.165-171
• /
• 2009

Resins were synthesized by mixing 1-aza-15-crown-5 macrocyclic ligand attached to styrene (2th petroleum in 4th class hazardous materials) and divinylbenzene (DVB) copolymer with crosslinkage of 1%, 2%, 8%, and 16% by substitution reaction. The characteristic of these resins was confirmed by content of chlorine, element analysis, thermogravimetric analysis (TGA), surface area (BET), and IR-spectroscopy. The effects of pH, time, dielectric constant of solvent and crosslinkage on adsorption of metal ion by the synthetic resin adsorbent were investigated. The metal ion showed a fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in an increasing order of uranium $(UO_2^{2+})$ > lead $(Pb^{2+})$ > chromium $(Cr^{3+})$ ion. The adsorption was in the order of 1%, 2%, 8%, and 16% crosslinkage resin and adsorption of resin decreased in proportion to the order of dielectric constant of solvents.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.97-104
• /
• 2017

In this study, waste tire rubbers were pyrolyzed in a lab-scale pyrolysis plant equipped with a fluidized bed reactor in a temperature ranges of $450-650^{\circ}C$. The main object of this work is to investigate the properties of pyrolysis oil with reaction temperatures and the behavior of sulfur in the products when waste polypropylene was added for co-pyrolysis. The maximum yield of oil was about 52wt.% at the reaction temperature of $456^{\circ}C$. From GC-MS analysis, the pyrolysis oils consisted mainly of limonene, toluene, xylene, styrene, trimethylbenzene, methylnaphthalenes and some heteroatom(sulfur and nitrogen)-containing compounds. The addition of waste polypropylene resulted in decrease in sulfur contents of the pyrolysis oils.

• Nuclear Engineering and Technology
• /
• v.5 no.1
• /
• pp.3-12
• /
• 1973

Some physical and chemical properties of wood-plastic combinations(W.P.C.) made of domestic soft woods such as pinus densiflora, pinus rigida and poplus deltoides were measured. The rates of improvement in properties were roughly proportional to the contents of polymer or polymer mixtures in W.P.C. For the W.P.C. obtained by means radiation curing and containing 80% of polymer or polymer mixture, the hardness and water absorptirity were improved 2.2 times and 4 times those of the original wood, respectively. The improvement of hardness was especially remarkable in the W.P.C. made of pinus densiflora and polystyrene(120%) to show 7 times increased hardness. For the W.P.C. obtained by means of thermal curing and containing 80% of polymer or polymer mixture, the hardness and water absorptivity were improved 2.4 times and 3.4 times those of the non-treated woods, respectively. These data indicate that the properties of W.P.C. prepared by means of radiation curing are not much different from those of W. p. C. prepared by means of thermal curing. Both of acid resistancy and alkali resistancy of the W.P.C. were also improved remarkably in comparison with the non-treated wood.

• Journal of Adhesion and Interface
• /
• v.14 no.2
• /
• pp.95-100
• /
• 2013

In this study, a series of hot-melt pressure sensitive adhesives (HMPSAs) based on metallocene polyolefin (me-PO) were prepared to investigate their possibility of replacing the HMPSAs based on styrenic block copolymers (SBCs). In addition, to optimize the performance of HMPSAs based on me-PO, several tackifiers having different softening point and molecular weight were evaluated. To achieve the HMPSAs which can satisfy the Dahlquist Criterion, hot melts required over 10% of process oil. To obtain the HMPSAs having low viscosity which can be applied by a spraying type applicator, secondary polymer having relatively low crystallinity was required. And, tackifier having high molecular weight attributed to increasing the cohesive strength of me-PO based HMPSAs.

• Nuclear Engineering and Technology
• /
• v.4 no.4
• /
• pp.331-339
• /
• 1972

For the syntheses of tritium labelled polystyrene, the basic material for the preparation of tritium luminous compound, various methods of labelling such as Tesla discharge, Wilzbach exposure, gamma irradiation, and U V. irradiation were compared in view of getting high specific activity-product. The obtained polystyrene-T(G) by the method of Tesla discharge and by the method of U. V. irradiation had specific activity of 1～1.2 mCi/mg, and these two methods were the most encouraging. Mixing of 1 part of polystyrene-T(G) with 4 parts of ZnS:Cu phosphor, in weight, appeared to be the most suitable ratio in tile preparation of luminous compound in luminosity point of view. When 30 mg. of obtained luminescent mixture was applied on steel plate by using 1 ml. of the selected binder (i.e., 1g of commercial varnish in 100m1. of benzene) the luminosity maximum was ca. 20 micro Lambert. The prepared luminous compound was confirmed to be practically applicable for mine marker or dark-room light source.

• Nuclear Engineering and Technology
• /
• v.4 no.1
• /
• pp.23-30
• /
• 1972

A study on the preparation of wood-plastic combinations by gamma-ray induced polymerization is carried out. In monomer impregnation, the rates and amounts are determined for various woods. The polymerization rates of various monomers and monomer mixtures impregnated mainly domestic woods are studied varying the total gamma-dose and gamma-dose rates. The obtained data indicate that; 1) in impregnation of monomer, populus deltoides is the fastest in rate, and the most impregnated in amount 2) the general trends of polymerization of monomers ill woods is in the order of vinyl acetate--methyl metacrylate--styrene, ranging from 3 to 15 Mard of total does in rate of 4$\times$10$^4$rad/hr., thus vinyl acetate or methyl metacrylate is suitable monomer in view of polymerization rate, 3) the successful woods in combination with monomer are pinus rigida and pinus densiflora in view of polymerization rate, 4) the monomers in woods are more easily polymerized under the conditions of moderately lower does rate, 2.1$\times$10$^4$rad/hr.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.770-775
• /
• 2006

Biofilters packed with various materials commonly show problems such as low performance and clogging in a long-term operation. Recently, a bioactive foam reactor(BFR) using surfactants has been suggested to ensure efficient and stable VOCs removal performance. This study was mainly conducted to investigate the feasibility of the BFR system using styrene as a model compound. An abiotic md a biotic tests were conducted to estimate a mass transfer coefficient($K_La$) and a specific substrate utilization coefficient(k) for the BFR, showing the rate of mass transfer was greater in the BFR than in other diffuser systems. A dynamic loading test also indicated that the performance of the BFR was stable under a shock loading condition. Furthermore, the maximum elimination capacity of the BFR was determined to be 109 $g/m^3/hr$ for styrene, which was much higher than those for biofilter systems generally reported in the literature. Overall, the experimental results suggest that the BFR be a potential alternative to the conventional packed-bed biofilters.