• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.375-380
• /
• 2004

Pb(Ni$\_$1/3/Nb$\_$2/3/)O$_3$-PbZrO$_3$-PbTiO$_3$ thick films were screen-printed on platinized alumina substrates and fired at 800-1000$^{\circ}C$. Two kinds of powders with different particle size were prepared by attrition and ball milling methods. Effects of particle size of starting material on the microstructure and electrical properties of the thick films were investigated. Average particle size of attrition milled-powder (0.44 ${\mu}$m) was much smaller than that of ball milled-powder (2.87 ${\mu}$m). Average grain size of the thick film prepared from attrition-milled powder was smaller than that of the thick film prepared from ball-milled powder at the sintering temperature of 800$^{\circ}C$. However, the difference in average particle size became smaller with increasing the sintering temperature. Thick films prepared from attrition-milled powders showed more uniform and denser microstructures at all firing temperatures. Thick films prepared from attrition-milled powders had better electrical properties at the firing temperature above 900$^{\circ}C$ than thick films prepared from ball-milled powders. Dielectric constant, remanent polarization and coercive field of the thick film prepared from attrition-milled powders and fired at 900$^{\circ}C$ were 559, 16.3 ${\mu}$C/cm$^2$, and 51.3 kV/cm, respectively.

• Journal of the Korean Magnetics Society
• /
• v.13 no.3
• /
• pp.109-114
• /
• 2003

The purpose of this study Is to investigate the effect of $V_2$O$_{5}$ addition on the microstructures and magnetic properties of 7.7${\times}$4.5${\times}$1.0 mm sized multi-layer chip inductors prepared by the screen printing method using 0∼0.5 wt％ $V_2O_{5}$-doped NiCuZn ferrite pastes. With increasing the $V_2O_{5}$ content, the exaggerated grain growth of ferrite layers was developed due to the promotion of Ag diffusion and Cu segregation into the grain boundaries oi ferrites, which affected significantly the magnetic properties of the chip inductors. After sintering at $900^{\circ}C$, the inductance at 10 MHZ of the 0.5 wt％ $V_2O_{5}$-doped chip inductor was 3.7 ${\mu}$H less than 4.2 ${\mu}$H of the 0.3 wt% $V_2O_{5}$-doped one, which was thought to be caused by the residual stress at the ferrite layers increased with the promotion of Ag diffusion and Cu segregation. The quality factor of the 0.5 wt% $V_2O_{5}$-doped chip inductor decreased with increasing the sintering temperature, which was considered to be caused by the electrical resistivity of the ferrite layer decreased with the promotion of Ag/cu segregation at the grain boundaries and the growth of the mean grain size of ferrite due to exaggerated grain growth of ferrite layers.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.21 no.1
• /
• pp.53-66
• /
• 1995

The gene for ${\gamma}$-casein, a milk protein, is a member of a family of casein gene which is expressed in mammary glands of the animal during the late gestation and lactation periods binder the influence of various hormones. In order to elucidate tile mechanisms b)'which hormones regulate the coordinate induction of milk protein genes, the mouse ${\gamma}$-casein gene was isolated and characterized. The ${\gamma}$-casein gene was screened from a mouse genomic library constructed in bacteriophage EMBL3 with the ${\gamma}$-casein CDNA used as probe and one clone was obtained. The ${\gamma}$-casein CDNA as probe was partially sequenced and contained ATG start codon and 5'-noncoding region. The cloned genomic DNA was digested with Sal I restriction enzyme, by which the insert DNA can be isolated from EMBL3 vector. Three DNA bands were observed and the size of DNAs was approximately 28kb, 14kb and 9Kb, respectively Accordingly the size of the insert DNA was calculated with approximately 23Kb. The result of Southern blot analysis, however, showed that the cloned genomic DNA was not hybridized with the synthetic oligonucleotides (40 mer) of cDNA 5'-end region, but it was hybridized with the y -casein CDNA. This means that tile cloned y -casein gene may not contain its promoter region. The ${\gamma}$ -casein genomic DNA containing the promoter region has been screening from mouse genomic library with oligonucleotides of CDNA 5'-end region as probe, and twenty-nine clones was obtained.

• Korean Journal of Materials Research
• /
• v.8 no.9
• /
• pp.813-818
• /
• 1998

Ultrafine powders of $\textrm{In}_{2}\textrm{O}_{3}$-doped $\textrm{SnO}_{2}$ were synthesized by a coprecipitation method and the effects of pH value and the amount of In2Q addition on particle size were investigated. The influence of pH value on particle size could be negligible, whereas the amount of $\textrm{In}_{2}\textrm{O}_{3}$ has influenced on particle size and specific surface area. The gas sensitivity to hydrocarbOn($\textrm{C}_{3}\textrm{H}_{8}$, $\textrm{C}_{4}\textrm{H}_{10}$) increased with $\textrm{In}_{2}\textrm{O}_{3}$ addition and reached a maximum at 3wt.% addition. From the results of impedance analysis and I-V characteristics. it was showed that the agglomeration structure of particles and the boundaries between agglomerates were the important factors to determine the gas sensing mechanism.

• The Journal of the Korea Contents Association
• /
• v.20 no.5
• /
• pp.46-57
• /
• 2020

The dissemination of smart devices has made a lot of changes in overall social activities. In particular, people use various types of smart devices in their spare time, such as watching video clips, but there is a lack of research on external factors influencing the attitude toward using such devices. Therefore, in this study, the effects of video viewing environmental factors (e.g. screen size and video length) and personal factors (e.g. gender and need for entertainment) on perceived ease of use, perceived usefulness, and attitude to use devices based on technology acceptance model. As a result of analyzing 660 users having different smart devices, the attitude to use smart devices is more positive as the screen size increases, but there is no difference according to gender. In addition, while the length of video clips does not affect the attitude to use, the need for entertainment positively affects the attitude to use. Based on the results of this study, we expect that it can be used for optimized customer marketing and management strategy that integrates product development and video content production in consideration of factors such as video viewing environmental factors and personal factors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.619-622
• /
• 2007

PDA provides an opportunity for users to study anytime and anywhere because it is portable and convenient thanks to its relatively small size. However, users may face difficulties to fully recognize the characters provided through lecture videos, due to its low resolution and small scaled screen. This thesis proposes a system of remote lecture in which the size of videos can be adjusted and transmitted on the basis of contents necessary for study, using detection of region-of-interest(ROI) image, and a method of image scaling in a bid to solve such a problem of PDAs. The experiment on 802.11b wireless network shows that the proposed system is able to provide more optimized lecture videos than in existing method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1044-1051
• /
• 2003

In this paper, a compact planar microwave duplexer on the high dielectric substrate is presented. As the Ba(Mg$\sub$1/3/Ta$\sub$2/3/)O$_3$(BMT) has good dielectric performances with a high dielectric constant of $\varepsilon$$\sub$r/=23, it is suitable to apply to a printed circuit board fur reducing its circuit size. The BMT substrate is fabricated by using a tape casting fabrication process, and circuit patterns are screen-printed on it by suing silver paste. The open-loop ring type duplexer is designed and implemented on the BMT substrate, and it achieves the smaller size by 80% than one on a commercial substrate($\varepsilon$$\sub$r/=6.15) without degenerating its performance. Therefore the proposed BMT substrate has provided the miniaturization of the duplexer, moreover it can make a contribution towards reducing the size of microwave passive circuits.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.1
• /
• pp.35-42
• /
• 2016

Various events of stop, playback, capture, and zoom-in/out in playing video is available in the monitor of a small size such as smart phones. However, if the size of the display increases, then the cost of the touch recognition is increased, thus provision of a touch event is not possible in practice. In this paper, we propose a video event control system that recognizes a touch inexpensively from the depth information, then provides the variety of events of the toggle, the pinch-in / out by the single or multi-touch. The proposed method finds a touch location and the touch path by the depth information from a depth camera, and determines the touch gesture type. This touch interface algorithm is implemented in a small single-board system, and can control the video event by sending the gesture information through the UART communication. Simulation results show that the proposed depth touch method can control the various events in a large screen.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1167-1172
• /
• 2017

Desktop computers, which were the main means of Internet use and information activity, were pushed out by smart devices that emphasized mobility and simplicity. The recent information production and consumption activities are performed through smart devices, but there is no input device for smart devices that can fully replace traditional input devices such as full-size PC compatible keyboards. Because of the small size of the virtual keyboard that uses the touch screen of the smart device, typographical error occurs at a high rate. In this paper, we propose a variable virtual keyboard that minimizes the typographical errors of the conventional virtual keyboards. The proposed method minimizes the user 's input error by adjusting the size of each key of the virtual keyboard based on accumulated dataset of position and pressure of the user' s input error even though there is no difference in the key position arrangement of the conventional virtual keyboards.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.279-279
• /
• 2019

본 연구는 안동 하천실증연구센터에서 수행된 RIED 실험의 일환으로 실험수로내 식재된 버드나무 식생패치의 밀도에 따른 표면흐름의 특성을 검토하는 실험이다. 실험의 목적은 식생의 침수수위에 따른 식생주변 및 하도의 흐름특성을 검토하는 것으로 침수 수위조건은 유량공급조건의 변화를 통해 재현하였다. 본 연구에 사용된 LSPIV 기법은 하도내 입자투여를 통해 영상을 이용하여 입자간 이동속도를 분석하여 흐름장을 분석하는 것으로 본 연구에서 사용된 입자는 강랭이를 사용하였으며, 영상촬영은 크레인을 이용하여 캠코더를 이용하여 수로 상부에서 흐름영상을 취득하였다. 실험수로는 저면폭 3m, 만제폭 11m 사면경사 1:2의 구조로 이루어진 사다리꼴 형태의 직선수로로 이루어져 있다. 식생패치는 동일수로내 상부기준 32m 간격으로 설치되어 있으며 패치의 크기는 $4{\times}1.5m$의 크기로 이루어져 있다. 그림 1은 상공에서 촬영된 영상을 나타낸 그림으로 실험수로 및 LSPIV 분석을 위해 투하된 입자를 나타내는 그림이다. PIV 분석프로그램을 이용하여 분석된 식생대 및 하도영역에서의 유속장은 그림 2와 같다. 영상분석은 30초영상(900 frame)을 이용하여 분석하였다. 실험결과 식생패치 설치지점에서는 주흐름이 발생하는 우안측에서 높은 유속이 발생하고 약간의 편향된 흐름이 나타나는 것으로 확인되었다. 식생후면에서는 식생으로 인한 흐름의 차단 및 스크린효과로 인해 유속의 저감되는 것을 확인할 수 있다. 밀도에 따른 패치 후면부에서는 높은 밀도를 갖는 첫 번째 패치에서 유속의 저감효과가 높게 나타났으나 유량조건에 차이가 발생하는 것으로 나타났는데 이는 수위상승으로 인한 식생의 침수면적과 관계가 있는 것으로 판단된다.