• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1922-1931
• /
• 1999

A multicast traffic’s feature is the function of providing a point to multipoints cell transmission, which is emerging from the main function of ATM switch. However, when a conventional point-to-point switch executes a multicast function, the excess load is occurred because unicast cell as well as multicast cell passed the copy network. Additionally, due to the excess load, multicast cells collide with other cells in a switch. Thus a deadlock that losses cells raises, extremely diminishes the performance of switch. An input queued switch also has a defect of the HOL (Head of Line) blocking that less lessens the performance of the switch. In the proposed multicast switch, we use shared memory switch to reduce HOL blocking and deadlock. In order to decrease switch’s complexity and cell's processing time, to improve a throughput, we utilize the method that routes a cell on a separated paths by traffic pattern and the scheduling algorithm that processes a maximum 2N cell at once in the control part. Besides, when cells is congested at an output port, a cell loss probability increases. Thus we use the Output Memory (OM) to reduce the cell loss probability. And we make use of the method that stores the assigned memory (UM, MM) with a cell by a traffic pattern and clears the cell of the Output memory after a fixed saving time to improve the memory utilization rate. The performance of the proposed switch is executed and compared with the conventional policy under the burst traffic condition through both the analysis based on Markov chain and simulation.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.2
• /
• pp.113-118
• /
• 2013

The current GPU virtualization techniques incur large overheads when executing application programs mainly due to the fine-grain time-sharing scheduling of the GPU among multiple Virtual Machines (VMs). Besides, the current techniques lack of portability, because they include the APIs for the GPU computations in the VM monitor. In this paper, we propose a low overhead and high performance GPU virtualization approach on a heterogeneous HPC system based on the open-source Xen. Our proposed techniques are tailored to the bio applications. In our virtualization framework, we allow a VM to solely occupy a GPU once the VM is assigned a GPU instead of relying on the time-sharing the GPU. This improves the performance of the applications and the utilization of the GPUs. Our techniques also allow a direct pass-through to the GPU by using the IOMMU virtualization features embedded in the hardware for the high portability. Experimental studies using microbiology genome analysis applications show that our proposed techniques based on the direct pass-through significantly reduce the overheads compared with the previous Domain0 based approaches. Furthermore, our approach closely matches the performance for the applications to the bare machine or rather improves the performance.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.9
• /
• pp.512-522
• /
• 2003

For a time-multiplexed FPGA, a circuit is partitioned into several subcircuits, so that they temporally share the same physical FPGA device by hardware reconfiguration. In these architectures, all the hardware reconfiguration information called contexts are generated and downloaded into the chip, and then the pre-scheduled context switches occur properly and timely. Typically, the size of the chip required to implement the circuit depends on both the maximum number of the LUT blocks required to implement the function of each subcircuit and the maximum number of micro-registers to store results over context switches in the same time. Therefore, many partitioning or synthesis methods try to minimize these two factors. In this paper, we present a new estimation technique to find the lower bound on the number of micro-registers which can be obtained by any synthesis methods, respectively, without performing any actual synthesis and/or design space exploration. The lower bound estimation is very important in sense that it greatly helps to evaluate the results of the previous work and even the future work. If the estimated lower bound exactly matches the actual number in the actual design result, we can say that the result is guaranteed to be optimal. In contrast, if they do not match, the following two cases are expected: we might estimate a better (more exact) lower bound or we find a new synthesis result better than those of the previous work. Our experimental results show that there are some differences between the numbers of micro-registers and our estimated lower bounds. One reason for these differences seems that our estimation tries to estimate the result with the minimum micro-registers among all the possible candidates, regardless of usage of other resources such as LUTs, while the previous work takes into account both LUTs and micro-registers. In addition, it implies that our method may have some limitation on exact estimation due to the complexity of the problem itself in sense that it is much more complicated than LUT estimation and thus needs more improvement, and/or there may exist some other synthesis results better than those of the previous work.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2891-2898
• /
• 2014

It is feasible to develop a fault tolerant system through module level redundancy on the Integrated Modular Avionics (IMA). However, its great implementation complexity is one of important challenges when asynchronous hardware environment is naturally assumed. To solve this problem, Physically Asynchronous Logically Synchronous (PALS) on IMA has been proposed. But, it has adaptation problem by not addressing specific architecture for IMA system. In the paper, we propose how to synchronize the input data on the IMA system under primary/secondary redundancy architecture by referring to existing PALS. In the proposed scheme, we introduce window frame by considering rate monotonic scheduling and analyze the adequate the synchronization time. Finally, we verify the feasibility of the proposed design pattern through the systematic experiments.

• Journal of KIISE:Software and Applications
• /
• v.29 no.1_2
• /
• pp.20-29
• /
• 2002

The composite stock cutting problem is to allocate rectangular and/or irregular patterns onto a large composite stock sheet of finite dimensions in such a way that the resulting scrap will be minimized. In this paper, the distributed simulated annealing with the new cost error tolerant spatial decomposition is applied to the composite stock cutting problem in MPI environments. The cost error tolerant scheme relaxes synchronization and chooses small perturbations on states asynchronously in a dynamically changed stream length to keep the convergence property of the sequential annealing. This paper proposes the efficient data structures for representation of patterns and their affinity relations and also shows how to determine move generations, annealing parameters, and a cost function. The spatial decomposition method is addressed in detail. This paper identifies that the final quality is not degraded with almost linear speedup. Composite stock shapes are not constrained to convex polygons or even regular shapes, but the rotations are only allowed to 2 or 4 due to its composite nature.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.3
• /
• pp.119-125
• /
• 2000

A network of Asynchronous Transfer Mode (ATM) will be required to carry the traffics(CVR, VBR, UBR, ABR) generated by a wide range of services. The algorithm of WRR cell multiplexing is designed to serve no only CBR, VBR traffic but also ABR, UBR traffic in ATM. BSW algorithm was Proposed to carry on manage buffer efficiently at implementing of WRR scheduler. But, BSW a1gorithm cause serious degradation to the weight of each VC and the ratio of scheduler throughput because it allocates more weight than the weight allocated actually in VC and because it could not serve cell if the VC queue is empty. In this paper, we propose the WRR scheduling algorithm of BSW structure which improves the cell service ratio and cell delay. The proposed algorithm is capable of maintaining an allocated VC's weight correctly and decrease of average cell delay by serving other VC cell when empty in each VC queue and increase of cell service ratio as a whole.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.560-564
• /
• 2007

Korea Basic Science Institute(KBSI) has three general electron microscopes including High Voltage Electron Microscope(HVEM) which is the only one in Korea. Observed images through an electron microscope are what they are tilted by each step and saved, offering the more better circumstances for observers, a reconstruction to 3D could be a essential process. In this process, a warping method decreases distortions maximumly of avoided parts of a camera's focus. All these image treatment processes and 3D reconstruction processes are based on an accompaniment of a highly efficient computer, a number of Grid Node Personal computers share this process in a short time and dispose of it. Grid Node Personal computers' purpose is to make an owner can share different each other and various computing resources efficiently and also Grid Node Personal computers is applying to solve problems like a role scheduling needed for a constructing system, a resource management, a security, a capacity measurement, a condition monitoring and so on. Grid Node Personal computers accomplish roles of a highly efficient computer that general individuals felt hard to use, moreover, a image treatment using the warping method becomes a foundation for reconstructing to more closer shape with an real object of observation. Construction of the electron microscope volume 랜더링 system based on Grid Node Personal computer through the warping process can offer more convenient and speedy experiment circumstances to observers, and makes them meet with experiment outcome that is similar to real shapes and is easy to understand.

• Journal of Korea Port Economic Association
• /
• v.30 no.4
• /
• pp.47-67
• /
• 2014

This study examined elements which could evaluate a container terminal logistics system from the viewpoint of supply chain management. This study derived the elements of a container terminal logistics system such as flexibility, reliability, responsiveness, and information sharing and 16 evaluation sub-items in the aspect of a supply chain. In the result of analysis, the weight between SCM elements of a container terminal logistics system was the highest in reliability(0.282), followed by flexibility(0.273), responsiveness(0.224), and information sharing(0.221). The conversion weight was calculated by combining the weight of elements of a container terminal logistics system and the weight of evaluation sub-items. The highest weight which was considered as the most important factor to evaluate a container terminal logistics system was work planning(berth, yard) of flexibility(0.081), followed by accurate fulfillment of container work schedule(ship, yard) and the optimum distribution and arrangement of equipment(QC, TC, YT)(0.079), stable works without damage of containers and ships(0.071), and preventive maintenance of equipment and operators' skill(0.070).

• Journal of Korea Water Resources Association
• /
• v.51 no.12
• /
• pp.1171-1180
• /
• 2018

Korea's water transmission system is operated by the nonpressure flow method that flows from highlands to lowlands due to the nature of Korea with many mountainous areas. In order to store water in the highlands, the water pumps are installed and operated. However, In this process, a lot of electrical energy is consumed. therefore, it is necessary to minimize the energy consumption by optimizing the size and operation schedule of the water pumps. The optimal capacity and operation method of the water pump are affected by the size of the tank (distributing reservoir). Therefore, in order to economically design and operate the water transmission system, it is reasonable to consider both the construction cost of the water pump and the tank and the long-term operation cost of the water pump at the step of determining the scale of the initial facilities. In this study, the optimum design model was developed that can optimize both the optimal size of the water pump and the tank and the operation scheduling of the water pump by using the genetic algorithm (GA). The developed model was verified by applying it to the water transmission systems operated in Korea. It is expected that this study will help to estimate the optimal size of the water pump and the tank in the initial design of the water transmission system.