• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.123-130
• /
• 2023

Salmonella spp. are prevalent foodborne pathogens that are infective at relatively low concentrations, thus posing a serious health threat, especially to young children and the elderly. In several countries, the management and regulation of Salmonella spp. in food, including seafood, adhere to a negative detection standard. The risk of infection is particularly high when seafood is consumed raw, which underscores the importance of timely detection of pathogenic microorganisms, such as Salmonella. Accordingly, this study aimed to develop a combined pre-treatment and detection method that includes pre-culture and DNA extraction in order to detect five species of Salmonella at concentrations below 10 CFU/mL in seafood. The effectiveness of the proposed method was assessed in terms of the composition of the enrichment (pre-culture) medium, minimum incubation time, and minimum cell concentration for pathogen detection. Furthermore, a practical DNA extraction method capable of effectively handling high salt conditions was tested and found to be successful. Through polymerase chain reaction, Salmonella spp. Were detected and positively identified in shellfish samples at cell concentrations below 10 CFU/g. Thus, the proposed method, combining sample pre-treatment and cell culture with DNA extraction, was shown to be an effective strategy for detecting low cellular concentrations of harmful bacteria. The proposed methodology is suitable as an economical and practical in situ pre-treatment for effective detection of Salmonella spp. in seafood.

• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.186-200
• /
• 2023

This study aims to improve the usability of the white cane, which is walking equipment that most local visually impaired people use and carry when going out, and to contribute to the prevention of safety accidents and the walking rights of visually impaired people by providing improvement and resolution measures for the problems identified. Also, this study is a study on the visually impaired, primarily targeting the 1st to 2nd degree visually impaired people, who cannot go out on their own without walking equipment such as a white cane, corresponding to 20% among approximately 250,000 blind and low vision people in the Korean population. In the study process, the concept has been developed from the user's point of view in order that the white cane becomes a real help in the walking step of the visually impaired and the improvement of usability of the white cane, the main walking equipment for the visually impaired, are done by problem identification through the Double Diamond Model of Design Thinking (Empathize → Define → Ideate → Prototype → Test (verify)). As a result of the investigation in the process of Empathy, a total of five issues was synthesized, including an increase in the proportion of the visually impaired people, an insufficient workforce situation to help all the visually impaired, an improvement and advancement of assistive devices essential for the visually impaired, problems of damage, illegal occupation, demolition, maintenance about braille blocks, making braille block paradigms for the visually impaired and for everyone. In Ideate and Prototype steps, situations derived from brainstorming were grouped and the relationship were made through the KJ method, and specific situations and major causes were organized to establish the direction of the concept. The derived solutions and major functions are defined in four categories, and representative situations requiring solutions and major functions are organized into two user scenarios. Ideas were visualized by arranging the virtual Persona and Customer Journey Map according to the situation and producing a prototype through 3D modeling. Finally, in the evaluation, the final concept derived is a device such a smart cane for guidance for the visually impaired as ① a smart cane emphasizing portability + ② compatibility with other electronic devices + ③ a product with safety and convenience.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.124-132
• /
• 2016

In order to estimate the effect of flow distributors connected to an upper nozzle of CMT(Core Makeup Tank) on the thermal-hydraulic characteristics in the tank, a simplified 2 inch Small Break Loss of Coolant Accident(SBLOCA) was simulated by skipping the decay power and Passive Residual Heat Removal System(PRHRS) actuation. The CMT is a part of safety injection systems in the SMART (System Integrated Modular Advanced Reactor). Each test was performed with reliable boundary conditions. It means that the pressure distribution is provided with repeatable and reproducible behavior during SBLOCA simulations. The maximum flow rates were achieved at around 350 seconds after the initial opening of the isolation valve installed in CMT. After a short period of decreased flow rate, it attained a steady injection flow rate after about 1,250 seconds. This unstable injection period of the CMT coolant is due to the condensation of steam injected into the upper part of CMT. The steady injection flow rate was about 8.4% higher with B-type distributor than that with A-type distributor. The gravity injection during hot condition tests were in good agreement with that during cold condition tests except for the early stages.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.845-856
• /
• 2020

This study proposes a bridge evaluation system for indivisible permit vehicles such as hydraulic cranes. The permit loads for the bridge evaluation are divided into three categories: routine permit loads, special permit 1 loads, and special permit 2 loads. Routine permit and special permit 1 vehicles are allowed to cross a bridge with normal traffic. For these two permits, the standard lane model in the Korean Highway Bridge Design Code was adopted to consider normal traffic in the same lane. Special permit 2 vehicles are assumed to cross a bridge without other traffic. Structural analyses of two prestressed-beam bridges and two steel box girder bridges were conducted for the proposed permit loads. The rating factors of the four bridges for all permit loads were calculated as sufficiently large values for the moment and shear force so that crossing the bridges can be permitted. A reliability assessment of the bridges was performed to identify the reliability levels for the permit vehicles. It was confirmed that the reliability level of the minimum required strength obtained by the load-resistance factors yields the target reliability index of the design code for the permit vehicles.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.5
• /
• pp.711-721
• /
• 2022

Due to a long-term pandemic of COVID-19 since 2019, our society finally goes into 'un-tact (non-contact) era' in earnest by increasing an importance of non-contacted activities which are able to live without contacts among people. Un-tact era has influenced to generate a huge structural change with digitalization in our daily life as well as industrial society based on digital twin as an essential technology. As a technology representing real world in virtual digital world by integrating various technologies applied to 4^th industrial revolution, digital twin leads an innovation in industrial society with diverse industrial processes. But this technique isn't actively used across all industries due to structural limitations and environmental restrictions of digital twin. Especially, the field of construction and facility is necessary to use digital twin because it requires periodic managements of buildings in daily life and is directly connected with casualties in cases of disaster. But issues faced in reality are acting as an obstacle for applying digital twin. Therefore, this study suggests the necessity applying digital twin in facility safety response based on these issues and emphasizes active applications of digital twin by describing the expected effects being created. Furthermore, it connects to create demands of digital twin by overcoming current issues and suggesting high sustainable development.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.35-44
• /
• 2022

This study aims to evaluate the stress and life of cylindrical roller bearings used in aircraft gearboxes, and to select a roller profile that minimises the contact stress between bearing rollers and raceways. The mounting clearance of four points contact ball bearing was determined, so that cylindrical roller bearings support all radial loads, and the bearing mounting position was determined to maximise the bearing lives. In addition, the static safety factor and dynamic life of bearing were predicted according to ISO 76 & ISO/TS 16281 using the load spectrum determined based on the operating load cases of aircraft gearboxes. Furthermore, the optimal roller profile was selected by analysing the contact stress according to the roller profile shape, and the safety of each roller was evaluated. The results stated that the required safety factor and lifetime were satisfied, and Johns Gohar roller profile was optimal.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.334-346
• /
• 2022

There is a lack of knowledge and information on the understanding and application of the Process Safety Management (PSM) system, recognized as a major cause of industrial accidents in small-and medium-sized workplaces. Hence, it is necessary to prepare a protocol to secure the practical and continuous levels of implementation for PSM and eliminate human errors through tracking management. However, insufficient research has been conducted on this. Therefore, this study investigated and analyzed the various violations in the administrative measures, based on the regulations announced by the Ministry of Employment and Labor, in approximately 200 small-and medium-sized PSM workplaces with fewer than 300 employees across in korea. This study intended to contribute to the prevention of major industrial accidents by developing a facility maintenance web program that removed human errors in small-and medium-sized workplaces. The major results are summarized as follows. First, It accessed the web via a QR code on a smart device to check the equipment's specification search function, cause of failure, and photos for the convenience of accessing the program, which made it possible to make requests for the it inspection and maintenance in real time. Second, it linked the identification of the targets to be changed, risk assessment, worker training, and pre-operation inspection with the program, which allowed the administrator to track all the procedures from start to finish. Third, it made it possible to predict the life of the equipment and verify its reliability based on the data accumulated through the registration of the pictures for improvements, repairs, time required, cost, etc. after the work was completed. It is suggested that these research results will be helpful in the practical and systematic operation of small-and medium-sized PSM workplaces. In addition, it can be utilized in a useful manner for the development and dissemination of a facility maintenance web program when establishing future smart factories in small-and medium-sized PSM workplaces under the direction of the government.

• Journal of Internet Computing and Services
• /
• v.16 no.3
• /
• pp.13-20
• /
• 2015

This paper proposes a Near Field Communication (NFC) communication system that exchanges information of digital business cards efficiently for many to many communication to solve inconvenience of one-to-one communication when people exchanges business cards each other in meetings such as conference, forum, seminar. The proposed system can provide people to exchange contact information one-to-one as well as multiple members at once using a digital business card system that consists a server and a database based on NFC communication. The system has been developed to collect business card information from a NFC reader and to transfer it directly to a smartphone application effectively. The system can manage business card information with the application effectively and provide security in order to prevent from leakage of private information when transferring contact data.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.3
• /
• pp.47-57
• /
• 2013

Location privacy has been a serious concern for mobile users who use location-based services to acquire geographical location continuously. Spatial cloaking technique is a well-known privacy preserving method, which blurs an exact user location into a cloaked area to meet privacy requirements. However, cloaking for continuous moving object suffers from cloaked area size problem as it is unlikely for all objects travel in the same direction. In this paper, we propose a grid-based privacy preservation method with an improved Earth Mover's Distance(EMD) metric weight update scheme for semantic cloaking. We also define a representative cloaking area which protects continuous location privacy for moving users. Experimental implementation and evaluation exhibit that our proposed method renders good efficiency and scalability in cloaking processing time and area size control. We also show that our proposed method outperforms the existing method by successfully protects location privacy of continuous moving objects against various adversaries.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.197-205
• /
• 2015

Existing Web authentication method utilizes the resident registration number by credit rating agencies separating i-PIN authentication method which has been improved authentication using resident registration number via the real name confirmation database. By improving the existing authentication method, and it provides the available integrated ID authentication on Web. In order to enhance safety, the proposed authentication method by encrypting the user of the verification value, and stores the unique identifier in the database of the certificate authority. Then, the password required to log in to the Web is for receiving a disposable random from the certificate authority, the user does not need to remember a separate password and receives the random number by using the smart phone. It does not save the user's personal information in the database, and it is easy to management of personal information. Only the integration ID needs to be remembered with random number on every time. It doesn't need to use various IDs and passwords if you use this proposed authentication methods.