• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.161-163
• /
• 2021

This urban centralization is expected to develop rapidly, with 75% of the population living in the city by 2035. Large cities are becoming unsustainable due to side effects such as environmental pollution, severe traffic jams, excessive energy depletion, and destruction of the natural ecosystem. In addition, the happiness index of citizens of large cities is also falling because of high crime rates and safety accidents, the work-life imbalance caused by inequality and polarization, and overly competitive education. To solve this problem, Smart City, an IT-based future city model, was born. The Korean government is also actively attempting to improve urban competitiveness and promote sustainable development through efficient construction and operation of smart cities as a national focus project. To support the effort, we review the basic directions and strategies of Sejong City's Smart City service infrastructure based on the comprehensive national land plan, Smart City plan, and Smart City strategy plan.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.257-257
• /
• 2021

2007년 급경사지 재해 예방에 관한 법률 제정 이후, 급경사지에 대한 여러 가지 대책과 연구가 진행되고 있으나 2020년 발생한 최장기간의 장마에 안전한 것으로 판단되는 A-C등급의 급경사지 붕괴에 의해 많은 피해가 발생하였다. 특히 2020년에는 A-C등급의 급경사지 붕괴건수가 185건이나 발생하여 급경사지 평가기준에 대한 개선의 요구가 증가하고 있다. 본 연구에서는 현행 급경사지 주변 지역의 주민대피 관리기준의 강우특성이 과거 2009년에서 2014년 피해자료를 기반으로 산정된 강우기준이 적용되고 있다. 그러나 최근 기후변화에 따른 초과 강수량과 분석강우의 신뢰성을 확보할 필요가 있다. 따라서 본 연구에서는 최근 발생된 강우특성이 반영되지 못한 현행 급경사지 주민대피 관리기준의 강우기준에 대한 개선을 위해 강우자료의 30년 이상의 강우분석을 반영하고 최근의 기후변화 특성에 따른 강우분석자료를 검토하여 주민대피 관리기준에서의 강우기준 개선에 대한 연구를 하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.315-324
• /
• 2017

The smart grid with distributed power supply introduces a number of problems including not only the problems of the existing power grid but also the problem of protection co-operation due to new electric phenomenon because it has a mixed operation structure combining the existing radial operation structure and the new loop operation structure. The EMTP based power system analysis method has flexibility and convenience from the view of system configuration but it requires another experimental verification because of uncertainty of design and analysis results. On the other hand, the real demonstration system has difficulties in observing accurate fault on large scale system due to considerable economical and spatial construction cost, system configuration constraint, and it is difficult to demonstrate the distributed, autonomous and adaptive control strategy of smart grid. In this paper, a basic theory for a micro smart grid simulator design using MEMS(Micro Electro-Mechanical Systems) miniaturization technology is studied which can safely and freely experiment and observe electrical phenomena, and distribution, autonomous adaptive control strategy for disturbances on 22.9kV smart grid under minimum economic and spatial cost.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.244-244
• /
• 2022

4차 산업혁명에 따라 유역 및 하천관리 사업, 각종 풍수해 예방사업 분야에 다양한 스마트기술이 도입되고 있으나 건설현장 침수 피해 사고는 지속적으로 발생하고 있다. 굴착공사 현장에서 발생할 수 있는 침수피해를 사전에 예측하기 위해서는 공정별로 변화하는 현장상황을 반영하여 다양한 강우 시나리오를 기반으로 침수 예측 모델링이 선행되어야한다. 따라서 본 연구에서는 2차원 동수역학 모형인 HDM-2D 모형을 기반으로 굴착공사 현장 침수피해 예측 모델을 개발하여 굴착공사현장 침수 예·경보 시스템에 탑재하고자 한다. 침수피해 예측 모델은 천수방정식을 Petrov-Galerkin stabilized scheme 으로 이산화하여 해석하는 수평 2차원 동수역학 흐름해석모델로서 수로 및 지표면 등 다양한 지형 상황에서의 물 흐름을 상세하게 해석할 수 있다. 지형자료 생성 이후 경계조건 부여를 통해 수행되며 침수발생지역의 유속, 수심, 수위를 취득할 수 있다. 배수지나 굴착공사 현장에 2차원 흐름해석을 적용하는 경우 지형의 경사나 배치가 공간에 따라 변화하므로 불연속적인 흐름을 유발하여 모의결과의 계산 오차를 검토해야 한다. 2차원 침수피해 예측 모형의 정확성을 확인하기 위해 지면 돌출부가 있는 흐름 문제와 테스트베드 대상지에 침수해석 모형을 적용하였다. 돌출부 흐름 문제의 경우 돌출부를 지나며 발생하는 유속과 수심 모의 결과를 상용모형과 비교검증 하였으며 테스트베드 대상지역에 침수피해예측모형을 적용했을때 지형 경사에 따른 흐름의 변화와 침수양상을 확인할 수 있었다.

• Journal of Internet of Things and Convergence
• /
• v.10 no.4
• /
• pp.27-33
• /
• 2024

As of 2023, the number of accident victims in the domestic construction industry is 26,829, ranking second only to other businesses (service industries). The accident types of casualties in all industries were falls (29,229 people), followed by falls (14,357 people). Based on the above data, this study attaches sensors to hard hats and insoles to predict fall accidents that frequently occur at construction sites, and proposes smart safety equipment that applies a random forest algorithm based on the data collected through this. The random forest model can determine fall accidents in real time with high accuracy by generating multiple decision trees and combining the predictions of each tree. This model classifies whether a worker has had a fall accident and the type of behavior through data collected from the MPU-6050 sensor attached to the hard hat. Fall accidents that are primarily determined from hard hats are secondarily predicted through sensors attached to the insole, thereby increasing prediction accuracy. It is expected that this will enable rapid response in the event of an accident, thereby reducing worker deaths and accidents.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.3
• /
• pp.21-28
• /
• 2022

The TMD has a simple structure than other vibration control devices and shows excellent control performance for the simple harmonic vibration generated in the structure. However, the vibration control range is narrower than other control devices, making it vulnerable to vibration cycles caused by unexpected external loads. The ETMD developed in this study consisted of Mass with electromagnets. Therefore when supplying a current, the magnetic field is formed to increase the friction force with the friction plate, thereby instantaneously controlling the behavior of the Mass. The experiment was conducted to compare the control performance of the control device by installing the ETMD developed for control performance evaluation in the center of the model simple beam bridge to forced excitation at 3.02 Hz where the maximum bending displacement occurs. As a result of the experiment, ETMD exhibited excellent control performance with a maximum bending displacement attenuation rate of 57.51%.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.2
• /
• pp.43-53
• /
• 2024

This study analyzes the importance-performance analysis (IPA) of the 10 dimensions of the smart construction safety management system, and analyzes which dimensions are important and which dimensions are performing to determine key improvement tasks, incremental improvement tasks, Maintenance and reinforcement tasks and continuous maintenance tasks were derived. Among the 10 dimensions of the smart construction safety management system, the dimensions that are recognized as important by all field managers and field workers and have high performance are the automatic risk displacement measurement system, smart environmental sensor system, and heavy equipment seizure prevention system. However, areas that were perceived as having high importance but low performance were worker location tracking systems, smart safety helmet chin muscles, and smart safety ring fastening. Among the smart construction safety management systems perceived by field managers, areas for key improvement with high importance and low performance included worker location tracking system and smart safety ring fastening. Among the smart construction safety management systems perceived by field workers, the area for key improvement with high importance and low performance was the automatic risk displacement measurement system.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.152-161
• /
• 2020

In the construction, VR(Virtual Reality) is simply used by users to implement and experience 3D modeling in virtual reality, such as safety, practical education, and promotion. The VR related research includes content development and visualization simulation such as disaster safety evacuation simulation and design education contents. Research on developing suitable VR and presenting directionality is insufficient, which is required in practice. Therefore, in this study, prior to the development of VR suitable for the construction, quantitative evaluation, and analysis based on the judgment of experts are performed. However, the research was conducted on the design stages, which are believed to have high needs and application effects of VR during the lifecycle of construction. There are nine tasks that can be applied to VR in the design stage, and these tasks were evaluated and analyzed using IPA(Importance Performance Analysis) by surveying the level of expectations, importance, and performance. As a result, it was evaluated and analyzed that VR and content development was necessary for the review of member interference and collaboration work for decision making among related stakeholders. The results of this study are expected to be used as basic data for the development of VR to be applied in the design stage to the future.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.916-923
• /
• 2023

Purpose: Looking at the status of fatal accidents in the construction industry in the 2022 Industrial Accident Status Supplementary Statistics, 27.8% of all fatal accidents in the construction industry are caused by construction equipment. In order to overcome the limitations of tours and inspections caused by the enlargement of sites and high-rise buildings, we plan to build a model that can extract construction equipment using computer vision technology and analyze the model's accuracy and field applicability. Method: In this study, deep learning is used to learn image data from excavators, dump trucks, and mobile cranes among construction equipment, and then the learning results are evaluated and analyzed and applied to construction sites. Result: At site 'A', objects of excavators and dump trucks were extracted, and the average extraction accuracy was 81.42% for excavators and 78.23% for dump trucks. The mobile crane at site 'B' showed an average accuracy of 78.14%. Conclusion: It is believed that the efficiency of on-site safety management can be increased and the risk factors for disaster occurrence can be minimized. In addition, based on this study, it can be used as basic data on the introduction of smart construction technology at construction sites.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.513-527
• /
• 2018

The Tunnel Boring Machine(TBM) is relatively insufficient to cope with unpredicted changes in ground conditions as compared with Conventional Tunnelling Methods. Therefore, it is very important to predict the TBM performance at the design stage and estimate the advance rate for the calculation of the construction period. In this study, we added data to 211 TBM databases constructed in the previous study and analyzed the correlation between TBM outer diameter, maximum thrust, maximum cutterhead torque, cutterhead driving power and RPM, which are the main design and manufacturing specifications of TBM. As a result of the analysis from results obtained in the previous studies, it was confirmed that TBM outer diameter is very effective and important in estimating maximum thrust, maximum cutterhead torque, and cutterhead driving power of the TBM. As a result of comparing the regression equations derived from other TBM databases outside the country and the regression equation obtained from the present study results, the maximum thrust showed a similar tendency to each other, but the maximum torque estimated from the regression equation of this study was higher than that of other countries in the case of the large scale TBM.