• 자원리싸이클링
• /
• 제25권4호
• /
• pp.11-22
• /
• 2016

전 세계적으로 자동차 산업에서 사용된 제품을 위한 재제조는 신제품에 비해 에너지와 자원 소모율을 크게 감소시킬 수 있는 장점을 가지고 있다. 본 논문에서는 자동차 부품중 하나인 스로틀바디를 대상으로, 재제조 세부 공정을 분석하고, 각 세부 공정별 고장모드 및 이에 대한 FMEA 도출 및 많은 고장유형에 대한 심각도, 검출도, 발생도의 정도를 결정하는 것이다. 그리고 RPN값을 계산하는데 사용되고 있는 현재 RPN방법과 제안하고자 하는 세 가지 방법인 합산법, 제곱근법, 볼륨법에 대하여 비교하고자한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1792-1797
• /
• 2007

This paper try to find root-cause of failure in a connector used in transmitting signals for throttle body control in automotives by analyzing possible failure causes and performing experiments to simulate the cable failure in field. The connector comprises fins, wires, and case moldings. The failure is due to degradation of initial clamping force required fixing fins and wires in the connector. Expansion and compression of the case molding material surrounding fins would cause the degradation. Investigations of strict initial claming force and control of thermal expansion property of the molding are required to prevent the failure.

• 대한기계학회논문집B
• /
• 제32권11호
• /
• pp.884-890
• /
• 2008

Many researches have been carried out to reduce the emission levels and lower the fuel consumption in SI engines. Recently electronically controlled injection system is widely adapted to a passenger car to achieve these goals. Throttle body is also an important factor which influences on the emissions and engine power. In this study we redesigned a throttle body and conducted an experimental study to see the effects on engine performance and emission characteristics. We could find that idle speed control(ISC) showed stable operation characteristics as the cooling water temperature varied. And CO and HC emissions also satisfied the regulation limit.

• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.71-77
• /
• 2008

This paper proposes an Electronic Throttle Body (ETB) model considering a non-linearity of DC motor driver which is integrated with a H-bridge and a gate driver. A propagation delay and reverse recovery time of switching components cause non-linear characteristic of DC motor driver. This non-linearity affects not only the amateur voltage of DC motor, but also entire behaviour and parameters of ETB. In order to analyze the behavior of ETB more accurately, this non-linear effect of DC motor driver is modeled. The developed ETB model is validated by use of the step response and ramp response experiments, and it shows relatively accurate results compared with linear DC motor driver model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.353-358
• /
• 2001

Turbo-charging or Super-charging has been used to boost engine power for Gasoline Engine and Diesel Engine came to the world at the beginning of $20^{th}$ century. So far Turbo-Charger has enjoyed a high reputation in the charging filed for its technical advantages such as no demand of operation power from engine and an excellent charging effect in the event of a static operation at mid- and high engine speed. A mechanically driven Super-Charger, however, is now emerging in order to meet demands of the age of speed such as high engine power for a quick change of the driving mode - high engine torque even at low engine speed. Since Super-Charger needs driving power from engine, it cannot improve its relatively higher fuel consumption against that of Turbo-Charger. This negative point is still an obstacle to the wide use of Super-Charger. Super-Charger using Screw-type compressor which has already had a considerable base in air compressor market will fulfill this purpose of improving fuel consumption by minimizing operation power owing to no charging at idling or partially loading driving. This study aims to develop power control concept to achieve this minimization of operation power.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1229-1235
• /
• 2014

LPG차량의 공기 흡입 시스템에서 먼지 입자의 대부분은 공기 청정기를 통해 제거되지만, 아주 작은 입자는 제거되지 않고 흡기계통에 축적되게 된다. 이 축적된 카본은 공회전 속도 제어와 센서신호 그리고 배출가스에 영향을 주게 된다. 또한 엔진 채터링 현상이나 자동변속기의 변속시점 불량등을 야기시킨다. 이 연구는 세척액을 사용하여 흡기계통을 세척하는 것에 관한 것이다. 워밍업된 챠량에서 흡입호스를 제거하고 세척액을 사용하여 가속시에 세척액을 흡입장치에 분사시켜 흡기계통을 세척하는 것이다. 세척액을 사용하여 스로틀 바디, ISC, 서지탱크, 흡입매니폴드, 흡기밸브, 연소실까지 세척함으로서 다음과 같은 실험결과를 얻을 수 있다. 스로틀 밸브가 정확하게 작동되어 TPS의 센서 신호 전압이 개선되었으며, 차량이 정지하는 경우 ISC 시스템은 공회전 속도 제어를 원활하게 작동하였다. 또한 일산화탄소는 약 0.15 %, 탄화수소는 약 20~100PPM으로 각각 감소되어 배기가스가 현저하게 개선되었다.

• 대한기계학회논문집B
• /
• 제41권4호
• /
• pp.249-256
• /
• 2017

예혼합연소의 경우 연소시스템의 크기가 작고, 낮은 CO 및 NOx 배출 등의 많은 장점을 가지고 있어 고효율 저공해 가정용 응축보일러에 많이 적용되고 있다. 본 연구에서는 Metal Fiber와 Throttle Body를 적용하여 예혼합 연소시스템을 구성하여 연소특성을 분석하였다. 실험결과 Metal Fiber, Throttle Body 및 Baffle Plate의 조합을 통하여 열용량 6,250-25,000 kcal/h 조건에서 매우 안정적인 청염을 형성하였다. 배기가스의 경우 질소산화물은 당량비 0.724에서 0.795 조건에서 11 ppm 이하로 배출되었고 일산화탄소의 경우 동일 당량비 조건에서 50 ppm 이하로 배출되었다. 가정용 응축보일러의 중요 지표인 열효율의 경우 당량비 0.750 조건에서 96.3% 이상으로 측정되어 고효율 저공해 예혼합 연소시스템의 가능성을 확인하였다.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1427-1434
• /
• 2003

Turbo- or Super-charging has been used to boost engine power for Gasoline- and Diesel Engine since beginning of 20th century. So far turbo-charger has enjoyed a high reputation in the charging field for its technical advantages such as no demand of operation power from engine and an excellent charging effect in a static operation at mid- and high engine speed. A mechanically driven super-charger, however, is now popular due to the high engine power at quick change of the driving mode - high engine torque even at low engine speed. Since super-charger needs operation power from engine, it is difficult to improve its relatively higher fuel consumption than that of turbo-charger. This negative point is still an obstacle to the wide use of supercharger. Super-charger using screw-type compressor will fulfill the purpose to reduce fuel consumption by minimizing operation power owing to no charge at idling or part load driving condition. This study aims to develop power control concept to achieve the minimization of operation power. A screw type super-charger was modified in design partially and installed with an internal bypass valve and a bypass tube to control charging pressure at part load. The various control concepts show a possibility to reduce operation power of super-charger.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.21-29
• /
• 2003

Boosting of engine power by using Turbo- or Super-charger is a solution to comply with $CO_2$-regulation in Europe. Turbo-charger is now playing a major role in the field of charging system thank to its technical advantages such as no demand of operation power from engine. A mechanically driven Super-charger, however, is now popular due to quick speed response to change of the driving mode-high engine torque even at low engine speed. Since Super-charger needs operation power from engine, it is difficult to improve its relatively higher fuel consumption than that of Turbo-charger. This negative point is still an obstacle to the wide use of Super-charger. This study aims to develop power control concept to achieve the minimization of operation power when it is not necessary to charge at idling or part load driving condition. A screw type Super-charger was modified in design partially and adapted an internal bypass valve and a bypass tube to control charging pressure at part load. The various control concepts show a possibility to reduce operation power of Super-charger and result in improvement of fuel consumption.

• 로봇학회논문지
• /
• 제2권1호
• /
• pp.1-8
• /
• 2007

This paper presents a PID automatic gain-tuning algorithm for the electronic throttle valve which is driven by wire. Since the system characteristics of position control for electronic throttle valve are so complicated that both the real time robustness and the manufacturing cost must be considered for mass production. To resolve this paradox, a kind of algorithm called RLS (Recursive Least Square) is adopted for the control of the ETB (Electronic Throttle Body). Using this algorithm, the PID gains can be adjusted automatically with the estimated system parameters. Furthermore, a pre-filter is supplemented for the sake of the robustness against the friction and loads. From the industrial requests for the system, the design specifications are decided as follows: the settling time should be less than 1sec and the overshoot should be kept below 3%. The results of the experiments based on this approach show that the high robustness can be achieved while the system stability is satisfied steadily. A parameter estimation scheme and a gain-tuning algorithm have been properly combined and utilized in this research and the effectiveness is verified through the real experiments.