• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.379-387
• /
• 2011

Research and development of LP EGR system for the performance improvement and emission reduction on diesel engine is proceeding at a good pace. LP EGR system seems to be helpful method to further reduce$NO_x$ emissions while maintaining PM emissions at a low level because the boost pressure is unchanged while varying EGR rate. This study is experimentally conducted on a 2.0L common rail DI engine at the medium load condition (2000 rpm, BMEP 1.0 MPa, boost pressure 181.3 kPa) that difficult to use large amount of EGR gas because of deteriorations of performance and fuel consumption. And we investigated the characteristics of performance and fuel consumption while varying EGR systems. The overall results using LP EGR system equipped with ETC identified benefits on reduction of PM and improvement of fuel consumption and thermal efficiency while keep the $NO_x$ level compared to HP EGR and LP EGR with back pressure valve.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.503-510
• /
• 2016

Incinerators generally emit pollutants such as NOx and CO during the combustion process. In this paper, pollutant emissions and temperature distributions were studied in a simulated incinerator with a reversed (relative to the flue gas flow) secondary air injection system. The experiments were performed by using a lab-scale furnace in order to evaluate the effects of the injection location, direction and flow rate of secondary air jets. The emission of NOx was lower in the case of reversed secondary air injection than in the case of cross injection, due to the recirculation and mixing of the exhaust gas. In the reversed air injection cases, thermal NOx emissions decreased as secondary air ratio increased from 30 to 60 and slightly increased at secondary air ratios higher than 60. In most cases, CO emissions were not detected except for a few reversed secondary air injection cases, in which cases CO concentrations below 2ppm were observed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.659-665
• /
• 2017

When an electrically conducting fluid flows through a staggered tube bank, the heat transfer and fluid flow features are changed by the externally introduced magnetic field. This study provides a numerical investigation of this phenomenon. Heat and fluid flows are investigated for unsteady laminar flows at Reynolds numbers of 50 and 100 with the Hartmann number gradually increasing from zero to 100. As the Hartmann number increases, and owing to the effects of the introduced magnetic field, the velocity boundary layer near the tube wall is thinned, the flow separation is delayed downstream, and the shrinkage of a recirculation zone formed near the rear side is observed. Based on these thermo-fluid deformations, the resulting changes in the local and average Nusselt number are investigated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.5
• /
• pp.353-363
• /
• 2017

The dynamics of a water-steam system in a once-through boiler was simulated based on the physics-based modeling approach, representing the system in response to large load change or scale disturbance simulations. The modeling considered the mass, energy conservation, and momentum equation in the water pipe and the focus was limited to the sub-critical pressure region. An evaporator tube modeling was validated against the reference data. A simplified boiler system consisting of economizer, evaporator, and superheater was constructed to match a 500 MW power boiler. The dynamic response of the system following a disturbance was discussed along with the quantitative response characteristics. The dynamic response of the boiler system was further evaluated by checking the case of an off-design point operation of the feedwater-to-fuel supply ratio. The results re-emphasized the significance of controlling the feedwater-to-fuel supply ratio and additional design requirements of the water-steam separator and spray attemperator.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.4
• /
• pp.329-337
• /
• 1993

It has been acknowledged as an important problem to maintain identity or compatibility among experimental laboratory data obtained separately in different wave flumes. The data quality mainly depends on how long the target waves can be realized in a flume without distortions. In the present paper a control circuit is devised in the form of multiple feed-back operations to attain a complete equality of the intended waves and the realized waves. The analysis of the circuit gives an algorithm which can be easily adapted to a small computer controlling wave making hardwares. As a main feature of the algorithm, a numerical filter with wave absorbing capability is presented. The filter is discretely realized so that the discrete input matches to the output directly, hence applicable even to nondeterministic input Through several example analyses, the algorithm proved its accuracy, being effective to both regular and irregular reflected waves.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1399-1404
• /
• 2010

In the edge of new jumping up in global market, our construction industry is required to develop a competitive power and new construction market. As a considerable global player, our construction industry and information technology industry are regarded as to achieve more competitiveness and new market by developing fusion technology between information and construction technology. But, practically not only the technologic barrier but unripe developing model, it is time to visualize fusion strategic model and possible area as a constructional point of view. The aim of fusion technology is to increase productivity by reducing labor power and over all life cycle cost and to suggest new market with effective demanding power such as ubiquitous-city. As a successful development model, both the demand driven approach dealing with prompt IT developing speed and a circular leading model boosted by leading group will be key factors.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.603-607
• /
• 2011

Structure of flashback and reignition occurring near flameholder was experimentally investigated in a model combustor with V-gutter flameholder. The combustor has a long duct shape with cross section of $40{\times}40mm$ and City Nature Gas(CNG) were used as fuel. Measurements of chemiluminescence with high speed camera was used for visualization of flame structure. In the lean case, flashback distance depend on equivalent ratio. New flame occurred at the front tip of flameholder when flashback. Flashback flame moved toward downstream direction of combustor because mixture flow velocity had increased, and then re-ignition was caused by entering flow into recirculation zone that is formed behind the flameholder.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.402-405
• /
• 2011

디젤엔진에서 발생되는 PM과 $NO_X$는 강화되는 배기규제의 주요 저감대상으로서 이의 저감을 위한 다양한 후처리장치가 개발되고 있다. 이중 Urea-SCR은 $NO_X$의 전환율이 높고 연비에 미치는 영향이 작기 때문에 $NO_X$저감을 위한 최선의 장치로 인식되고 있다. 하지만, 우레아 수용액의 물성치 특성으로 인하여 동절기 $-20^{\circ}C$이하로 내려가는 지역에서 동결되는 문제점을 해결해야한다. 따라서 이러한 우레아 저장탱크에 해동 시스템을 적용하여 시동초기 우레아를 적정 시간내에 안정적으로 공급가능한 기술의 확보가 필요하다. 본 연구에서는 요소수 저장탱크 내부에 냉각수 순환 가열방식(CH)과 전기 가열방식(EH)을 이용하여 동결된 요소수의 해동현상에 대한 3차원 비정상상태 수치 해석을 수행하였다. 이를 통하여 해동 과정 중 나타난 액상분율, 온도영역 그리고 자연대류를 분석하여 각 가열 방식에 대한 해동특성을 비교하였으며 순수 갈륨 융해 실험 결과값과 수치 해석 결과값를 통하여 수치 해석 방법을 검증하였다. 결론적으로 1,000ml의 우레아 수용액이 확보되기까지의 시간은 CH의 경우, 275s, 그리고 EH의 경우, 230s임을 알 수 있었다.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2017.05a
• /
• pp.175-192
• /
• 2017

4차 산업혁명의 도래와 더불어 ICT 기계, ICT 금융, ICT 의료, ICT 나노 등과 같이 기술분야별 영역의 장벽이 허물어지고, 학제간 연구(Interdisplinary Research)가 일상화됨에 따라 무형자산의 가치평가시에도 융합기술의 가치평가 모형에 대한 니즈가 증대되고 있다. 특히, 기술의 매매, 현물출자, 기술금융(투자유치, 담보 보증), 인수 합병, 청산 소송 등 다양한 용도로 사용되고 있는 기술가치평가 모형은 융합기술의 입력변수 결정에 대한 체계적인 로직을 제공하지 못하고 있는 실정이다. 일반적으로 실제 거래사례가 존재할 경우, 국제가치평가기준(IVS)에 의하면 시장접근법이 우선적으로 적용될 수 있다고 권고된다. 그러나 융합기술의 이전거래를 비롯한 평가 활용사례를 수집하기도 어렵고 그렇다할 평가모델이 존재하지 않는 것이 사실이다. 융합기술에 대한 기술 및 시장의 사업화 환경을 고려하는 경우 소득접근법 기반의 평가기법이 유용하게 활용될 수 있는데, 기술수명, 매출액추정, 할인율, 산업기술요소 등의 핵심변수 결정에 관한 정형화된 로직이 존재하지 않으므로 본 고에서 융합기술 사례에 대해 실용적으로 활용가능한 변수추정 로직을 제시하고자 한다. 기술수명의 경우, 복수 개의 국제특허분류(IPC)별 피인용특허수에 따라 가중 적용하여 수명 추정을 위한 기준값을 정하며, 사업화소요기간 및 비용의 경우 평가대상 융합기술이 속하는 업종별 메타데이터값을 가중평균하여 현금흐름 추정기간을 최종 도출할 수 있다. 소득접근법에서의 매출추정, 할인율, 산업기술요소 변수 추정 이외에도 로열티공제법 적용을 위한 로열티율 결정에 있어서, 융합기술이 응용가능한 산업(업종)별 매출액 기반으로 가중 적용하여 각 변수값을 산출할 수 있다. 본 연구에서 개발된 융합기술 가치평가 모형은 향후 기술의 융복합화 특성을 반영하여 적정 가치를 산출하는 평가 가이드라인을 제공할 수 있을 것으로 기대된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.338-347
• /
• 2007

In this paper, a weighted block adaptive channel estimation (WBA-CE) for a space-time block-coded (STBC) single-carrier transmission with a cyclic-prefix is proposed. In operation of the WBA-CE, a STBC matrix-wise block for filter input symbols is first formulated. Applying a weighted a posteriori error vector-based least-square (LS) criterion for this block, the coefficient correction terms of the WBA-CE are then computed. An approximate steady-state excess mean-square error (EMSE) of the WBA-CE for the stationary optimal coefficient is also analyzed. Simulation results show in a time-varying typical urban (TU) channel that the proposed channel estimator provides better bit-error-rate (BER) performances than conventional algorithms such as the NLMS and RLS channel estimators.