• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1990.10a
• /
• pp.79-84
• /
• 1990

The modal parameter estimations of linear multi-degree-of-freedom structural dynamic systems are carried out in time domain. For this purpose, the equation of motion is transformed into the autoregressive and moving average model with auxiliary stochastic input (ARMAX) model. The parameters of the ARMAX model are estimated by using the sequential prediction error method. Then, the modal parameters of the system are obtained thereafter. Experimental results are given for a 3-story building model subject to ground exitations.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.60-68
• /
• 2014

In modern electronic warfare systems, a demand on the more accurate estimation method based on TDOA and FDOA has been increased. TDOA/FDOA localization consists of two-stage procedures; the extraction of information from signals, and the estimation of emitter location. CAF(complex ambiguity function) is known as a basic method in the extraction stage. However, when we extract TDOA and FDOA information from VHF(very high frequency) communication signals, conventional CAF algorithms may not work within a permitted time because of much computation. Therefore, in this paper, an improved sequential estimation algorithm based on CAF is proposed for effective calculation of extracting TDOA and FDOA estimates in terms of computational complexity. The proposed method is compared with the conventional CAF-based algorithms through simulation. In addition, we derive the optimal performance based on the CRLB(Cramer-Lao lower bound) to check the extraction performance of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.25-33
• /
• 2018

In this paper, we propose an iterative self-interference (SI) channel estimation method for in-band full-duplex cellular systems that employ orthogonal frequency division multiple access (OFDMA) on downlink (DL) and single-carrier frequency division multiple access (SC-FDMA) on uplink (UL), as in Long Term Evolution (LTE) systems. The proposed method first acquires coarse estimates of SI channels using DL signals and UL pilots, which are known to the base stations, and then refines the estimates by consecutively exploiting averaging in the frequency domain and channel truncation in the time domain. In addition, the method enhances the estimates further by iteratively executing this estimation procedure, and does not require any radio resources dedicated to SI channel estimation. Simulation results demonstrate that by significantly improving the SI channel estimation performance without requiring exact knowledge of the SI channel length, the proposed method achieves UL channel estimation performance and signal-to-interference-plus-noise ratio (SINR) performance very close to those in perfect SI cancellation.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.87-90
• /
• 1997

Mountain Method의 다른 형태인 Subtractive 클러스터링 알고리듬은 계산이 간단하고 기존의 클러스터링 방법들과는 달리 초기 클러스터 중심의 개수 선정이 필요 없기 때문에 클러스터를 추정하는데 효과적인 알고리듬이다. 또한 클러스터의 간격을 결정하는 파라미터의 값에 따라 클러스터의 개수를 다르게 할 수 있다. 그러나 이 파라미터에 의해 동일한 그룹(Class)내에서 여러 개의 클러스터 중심이 발생될 수도 있다. 본 논문에서는 Subtractive HyperBox 알고리듬을 사용하여 이 파라미터의 영향을 줄이고 발생한 클러스터 중심이 속한 그룹의 경계를 판정함으로서 같은 그룹내에서 하나의 클러스터만 발생하도록 하고, 순차적으로 클러스터링 한 후 결과를 Subtractive 클러스터링 알고리듬과 비교하여 보았다.

• Information and Communications Magazine
• /
• v.31 no.2
• /
• pp.44-51
• /
• 2014

본 논문에서는 초다시점 (Super Multi-view) 영상 합성을 위한 영상 기반의 온라인 삼차원 복원 기술들을 소개한다. 복원의 정확성을 높이고자 하는 방법은 크게 두 부류로 나뉜다. 먼저 재투영 오차를 비용 함수(Cost function)으로 정의하고, 이를 Bundle Adjustment로부터 최적화를 수행하는 방법과 카메라의 위치와 삼차원 복원 결과에 대해 확률적인 분포를 정의하고 이를 순차적으로 추정하는 확률적인 필터링(Stochastic filtering)에 기반한 방법이 존재한다. 본 논문에서는 두 방법의 장단점을 분석하고, 이로부터 새로운 확률적 필터링에 기반한 3차원 복원 및 카메라 위치 추정 방법을 제안한다. 이로부터 대공간 환경에 적용하여 성능을 검증한다.

• Journal of IKEEE
• /
• v.6 no.1 s.10
• /
• pp.102-110
• /
• 2002

An effective scheme to detect and diagnose multiple failures in a dynamic system is described for the case where the measurement noise is correlated sequentially in time. It is based on the modified interacting multiple model (MIMM) estimation algorithm in which a generalized decorrelation process is developed by employing the autoregressive (AR) model for the colored noise and applying measurement difference method.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.45-53
• /
• 1998

본 논문에서는 선스펙트럼 주파수(LSF) 파라미터를 위한 제한된 시간적 분해법을 제안한다. LSF 파라미터는 인접 차수에 대해 의존적이고, 차수간 순차성이 있으나, 기존의 시간적 분해법은 이러한 성질을 보존하지 못한다. 즉, 추정된 사건 벡터가 더 이상 LSF 파 라미터로서 해석되지 못하는 문제가 있다. 이를 해결하기 위하여, 본 논문에서는 사건 함수 간에 새로운 제약을 두어, 추정된 사건 벡터가 LSF 파라미터의 성질을 유지하도록 한다. 결 과적으로 제안된 방법을 이용하여 구해진 사건 벡터는 LSF 파라미터와 동일한 방법을 적용 하여 효과적으로 양자화될 수 있고, 실험 결과 평균 752bps의 전송률로 투명한 양자화를 수 행할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1132-1140
• /
• 2011

When the offshore wind power plant is planned to construct, it is important for the wind farm site to figure out the distribution of the weak soil layers that might cause subsidence by the impact of the external moment from the wind plant's load and an oscillating wind load. Coring test is the optimistic method to figure out weak soil layers, but this method have some problem such as condition of the in-situ or economical limitation. In order to make up for the weak points in coring test, the researches using the geostatistics methods is actually done. In this study, setting a fixed coastal area that offshore wind plants construct firstly and Estimation of distribution on the thickness of the weak soil layer through the geostatistic method is conducted. The weak soil layer is sorted by result of the Standard penetration test, geostatistic method is used to ordinary kring and sequential gaussian simulation and compared to both method's result. As a results of study, we found that both methods show similar estimations of deep weak soil layer and we could evaluate quantitatively the uncertainty of the result.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.1
• /
• pp.71-78
• /
• 2002

This paper presents a back-calculation technique leer the prediction of the behavior of earth wall inserted in multi-layered soil deposit. The soil properties are back-calculated from the measured displacement at each construction stage and the behavior of earth wall far the next construction stage is predicted using back-calculated soil properties. For multi-layered soil deposit, the back-calculation would be very difficult due to the increase in the number of variables. In this study, to solve this difficulty, the back-calculation was performed successively from the lowest layer to the upper layers. An efficient elasto-plastic beam-column analysis was used for forward analysis to minimize the computation time of iterative back-calculation procedure. The coefficients of subgrade reaction and lateral earth pressure necessary for the formation of p-y curve were selected as back calculation variables, and to minimize the effect of abnormal behavior of the wall which might be caused by any unexpected action during construction, the difference between measured displacement increment and computed displacement increment at each construction stages is used as the objective function of optimization. The constrained sequential linear programming was used for the optimization technique to found values of variables minimizing the objective function. The proposed method in this study was verified using numerically generated data and measured field data.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.87-94
• /
• 2017

Reliability analysis(RA) and Reliability-based design optimization(RBDO) require statistical modeling of input random variables, which is parametrically or nonparametrically determined based on experimental data. For the parametric method, goodness-of-fit (GOF) test and model selection method are widely used, and a sequential statistical modeling method combining the merits of the two methods has been recently proposed. Kernel density estimation(KDE) is often used as a nonparametric method, and it well describes a distribution function when the number of data is small or a density function has multimodal distribution. Although accurate statistical models are needed to obtain accurate RA and RBDO results, accurate statistical modeling is difficult when the number of data is small. In this study, the accuracy of two statistical modeling methods, SSM and KDE, were compared according to the number of data. Through numerical examples, the RA results using the input models modeled by two methods were compared, and appropriate modeling method was proposed according to the number of data.