• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.123-130
• /
• 2014

In TFT-LCD panel images, defects are typically detected by using a large difference in the brightness compared to the background. In this paper, we propose a sequential defect detection algorithm according to defect possibility caused by difference of brightness. By using this method, pixels with high defect probabilities are preferentially detected and defects with a large brightness difference are accurately detected. Also, limited defects with a small brightness difference is detected more reliably, eventually minimizing the degree of over-detection. We have experimentally confirmed that our proposed method showed an excellent detection result for detecting limited defects as well as defects with a large brightness difference.

• Journal of Chest Surgery
• /
• v.34 no.7
• /
• pp.569-573
• /
• 2001

We experienced a case of hemoptysis caused by bilateral upper lobe aspergilloma. He was 66 years old and had a history of old unclear pulmonary tuberculosis with irregular medication 20 years ago and intermittent hemoptysis for several years. In x-ray study, there was a bilateral upper lobe aspergilloma with cavity. He received bilateral wedge resection through thoracotomy with some interval to reduce postoperative complications. We selected the priorty of operation through the bronchoscope in the operation room. Both sides had the same pathology of aspergilloma and he was discharged after an uneventful postoperative course.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.2
• /
• pp.423-429
• /
• 2014

This paper discusses a method for getting Type I sums of squares by projections under a two-way fixed-effects model when variances of errors are not equal. The method of weighted least squares is used to estimate the parameters of the assumed model. The model is fitted to the data in a sequential manner by using the model comparison technique. The vector space generated by the model matrix can be composed of orthogonal vector subspaces spanned by submatrices consisting of column vectors related to the parameters. It is discussed how to get the Type I sums of squares by using the projections into the orthogonal vector subspaces.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.727-734
• /
• 2020

Fault tolerant corrective control for asynchronous sequential machines (ASMs) with transient faults is discussed in this paper. The considered ASM is vulnerable to a kind of faults whose manifestation may arise during transient transitions of the ASM, leading to transient faults occurring in non-fundamental mode. To overcome adverse effects caused by these faults, we present a novel corrective control scheme that can detect and tolerate transient faults in non-fundamental mode. The existence condition and design algorithm for an appropriate fault tolerant controller is addressed in the framework of corrective control theory. The applicability of the proposed control methodology is demonstrated in the FPGA experiment.

• Journal of KIISE:Information Networking
• /
• v.32 no.1
• /
• pp.29-33
• /
• 2005

It is not future story that host mobility in wireless network. We already have many devices which can access network among moving our locations. Internet protocol is extended to support not only host mobility but also network mobility. But nesting mobile networks and mobile hosts, there is a problem that routing path of packet becomes complex. By sequential tunneling on outgoing packet at mobile router and toward mobile network at correspondent node, it can be setting up direct path in nested mobile network environment. In this paper, we propose a method for delivering packet through optimized path by sequential tunneling. And evaluate this method by equations and simulations.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.19-22
• /
• 2005

본 논문에서는 대용량 네트워크 트래픽 데이터를 대상으로 사이트의 프라이버시를 보호하면서 마이닝 결과의 정확성, 실용성 등을 보장할 수 있는 효율적인 순차 패턴 마이닝 기법을 제안한다. 네트워크가 발달함에 따라 네트워크 트래픽 데이터에 대한 마이닝은 네트워크를 통한 통신의 패턴을 찾아내고, 이를 사용하여 침입 탐지, 인터넷 웜의 탐지 등으로 유용하게 쓰이게 되었다. 그러나 네트워크 트래픽 데이터는 네트워크 사용자 개개인의 인터넷 접속 형태, IP 주소 등의 정보를 포함하는 데이터로 네트워크 사용자의 프라이버시를 해칠 수 있다는 문제점이 존재한다. 따라서 이들 네트워크 트래픽 데이터를 대상으로 하는 마이닝 기법에서는 프라이버시 보호를 위하여 각 사이트에 저장되어 있는 네트워크 트래픽 데이터를 공개하지 않으면서도, 의미있는 패턴을 찾을 수 있어야 한다. 본 논문에서는 프라이버시 보호를 위하여 N-저장소 서버 모델을 제안한다. 제안된 모델에서는 데이터를 분할하여 암호화한 후, 이를 복호화할 수 없는 서버에서 집계하는 방식을 사용하여 실제 데이터가 저장되어 있는 각 사이트의 출처 정보를 감추는 방식을 사용한다. 또한, 효율적인 빈번 패턴 생성을 위하여 빈번 항목에 대한 인덱스 구조를 제안하고, 이를 기반으로 한 순차 패턴 마이닝 기법을 보인다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.4
• /
• pp.308-315
• /
• 2016

A new technique for Attitude & Heading Reference System (AHRS) by using sequential measurement noise covariance (SMNC) is addressed in a vibration environments in this paper. In particular, a low-cost inertial measurement unit in general diverges in the acceleration phase or vibrating environments due to inherent properties of gravity and acceleration. In this paper, by considering current and prior measurements to estimate actual attitudes and headings in a local frame, the proposed technique overcomes these problems efficiently. Finally, the performance of the suggested approach is verified by numerical simulations.

• The Korean Journal of Applied Statistics
• /
• v.26 no.6
• /
• pp.1009-1018
• /
• 2013

Regression analysis is useful to understand the relationship of variables; however, we need to test if the slope of each regression lines is the same when comparing several populations. This paper suggests a new parallelism test for several linear regression lines. We use F-test of ANOVA and Kruskal-Wallis (1952) tests after obtaining slope estimator from a sequential slope. In addition, a Monte Carlo simulation study is adapted to compare the power of the proposed methods with those of Park and Kim (2009).

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.11-19
• /
• 2008

The problem of controlling asynchronous sequential machines is addressed in this paper Corrective control means to make behavior of an asynchronous sequential machine equal to that of a given model. The main objective is to develope a corrective controller, especially when a model is given as nondeterministic, or a set of reference models. We first review representation of nondeterministic models and model matching problems with nondeterministic models, which are presented in the companion paper. We then propose necessary and sufficient conditions for the existence of corrective controllers and describe their design procedure. To show the applicability, the proposed control scheme is demonstrated in an example.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.200-201
• /
• 2017

This paper introduces the SPICE simulation results of 3D sequential inverter considering electrical coupling. TCAD data and the SPICE data are compared to verify that the electrical coupling is well considered by using BSIM-IMG for the upper NMOS and LETI-UTSOI model for the lower PMOS. When inter layer dielectric is small, it is confirmed that electrical coupling is well reflected in the top transistor $I_{ds}-V_{gs}$ characteristics according to the change of the bottom transistor gate voltage.