• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.12
• /
• pp.962-968
• /
• 2014

The lattice Boltzmann method(LBM) has attracted attention as an alternative numerical algorithm for solving fluid mechanics since the end of the 90's. In these days, its intrinsic unsteadiness and rapid increase in computing power make the LBM be more applicable for computing flow-induced noise as well as fluid dynamics. The lattice Boltzmann method is a weakly compressible scheme, so we can get information about both aerodynamics and aeroacoustics from single simulation. In this paper, numerical analysis on Aeolian tone noise generated by tandem-twin square cylinders in duct is performed using the LBM. For simplicity, laminar two-dimensional fluid models are used. To verify the validity and accuracy of the current numerical techniques, numerical results for the laminar duct and the cylinder flows are compared with the analytical solution and the measurement, respectively. Then, aerodynamic noise of the twin tandem square cylinders is investigated. It is shown that the aerodynamic noise from the twin tandem square cylinders can be reduced by controlling the distance between the cylinders.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.3 s.54
• /
• pp.539-553
• /
• 1996

The study was conducted from May to September in 1994 to investigate applicability of the Hearing Handicap Inventory for the Elderly-Screening version(HHIE-S) in parallel with the pure-tone audiometer to the initial screening test of noise-induced hearing loss(NIHL) in some noise-exposed workers. Subjects were selected by systemic sampling that took every 10th person from 6, 700 workers taking the annual occupational health examination by the department of Health Maintenance of Dongsan Hospital Keimyung University in Taegu. The authors administered the pure-tone audiometric test and self-reported questionnaire of HHIE-S including items of sociodemographic and job-related variables concurrently. The final subjects analysed were 1,019(488 males and 531 females) excluding fourteen persons who had many missing values in their questionnaires. The reliability coefficients of HHIE-S scale by Cronbach's alpha were 0.84. In the univariate analysis of hearing handicap measured by the HHIE-S, work duration, military service and the hearing threshold loss at 1KHz and 4KHz by the initial audiometer were significant in males while age, work duration and hearing threshold loss at 1KHz and 4KHz were significant in females. In the stepwise linear regression analysis, hearing threshold loss at 1KHz and 4KHz, was the only selected variable explaining the hearing handicap in males and hearing threshold loss at 1KHz and 4KHz, age, and work duration were selected in females. In ROC curves for HHIE-S scores against NIHL as gold standard which was defined by the follow-up audiogram as more than 30dB of the average of 0.5/1/2KHz and 50dB at 4KHz, the optimal cutoff for the parallel HHIE-S appeared to be 8. The results suggest that HHIE-S appeared to have some reliability and validity in this data and might be used in screening NIHL in parallel with pure-tone audiometer in noise-exposed workers.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.4
• /
• pp.318-327
• /
• 2012

The operating sound radiated from a laser printer includes tonal noise components caused by the rotating mechanical parts such as gear, shaft, motor, fan, etc. The negative effects of the tonal noise components need to be considered in the process of developing a sound quality index for the quantitative evaluation of the emotional satisfaction in terms of psycho-acoustics. However, in a previous paper, it was confirmed that the Aures tonality did not have enough correlation with the results of jury evaluation. The sound quality index based on loudness, articulation index, fluctuation strength has a little problem in considering the effects of rotating mechanical parts on the sound quality. In this paper, to solve the tonality evaluation problem, the calculation algorithm of Aures tonality was investigated in detail to find the cause of decreasing the correlation. The new tonality evaluation model was proposed by modifying and optimizing the masking effect, loudness ratio, and shape of weighting curve based on the basic algorithm of Aures tonality, and applied to two kinds of operating sound groups in order to verify the usefulness of proposed model. As a result, it is confirmed that the proposed tonality evaluation model has enough correlation and usefulness for expressing the tonalness in the operating sounds of laser printers. In the following paper, this results will be used to model the sound quality index as the input data by using the classification algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1401-1407
• /
• 2011

Abstract In this paper, we describe client/server puretone audiometer supporting video chat. Our system makes it possible for one audiometrist to concurrently assess multiple subjects. An audiometrist in remote place can monitor assessment procedure through video and/or result of each assessment step. This system also provides a video chat facility to lead audiometrist without a hitch whenever there occurs any problem during assessment. The one-to-many model of this system makes subjects to reduce not only expense but also waiting time.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.4
• /
• pp.331-339
• /
• 1996

It is most important to understand the behaviour of fish in case of the betterment of the current fishing gear and methods or the development of the conditioning by acoustic sound in marine ranching. This investigation has been attempted to provide for the prediction of the response action of fish to acoustic sound. The experimental fish was conditioned with sound and bait. As the acoustic sound for stimulus, the pure tone of sine waveform at the frequency of 200Hz was used. This pure tone was determined from previous investigation about hearing ability of walleye pollock Theragra chalcogramma. The fork length of walleye pollock used in this experiment was 385~450mm. The conditioning proceeding was recorded in the video tape recorder. Frequency of appearance in the feeding area was analyzed with computer and video tape recorder. The position of fish was tracked using the mouse cursor and picture mixed on the superimpose board. The response of conditioned fish to sound stimulus was appeared in the 8th day firstly. The conditioned fish remembered the stimulus sound for 4 days. Average frequency of appearance in the feeding area during the 30 seconds sound projection or 1 minute after the sound stimulus was 51%, and was higher than before it.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.4
• /
• pp.285-289
• /
• 1997

A Held experiment was carried out to confirm the effect of underwater sound on the luring of fish school of rudder fish in a set net at the coast of Cheju Island. The effects of the acoustic emission on the luring of fish school were observed at a cage around a set net fishing ground using a manufactured underwater speaker. Underwater sounds that were emitted for the luring of fish school were the pure sounds of which frequency were 300Hz and 400Hz, engine noise and swimming sound. The results of the observation are as follows : 1. The input and output wave forms of a manufactured underwater speaker in water tank were similar to those in measurement frequencies. The result of the observation indicated that it could be used for the purpose of the sound emission in measurement frequencies. 2. The effect of the emitted pure sound of 300Hz, 400Hz was remarkable for the luring of fish school in 2 minutes after the sound emission. The reaction of fish school was more sensitive to the pure sound of 400Hz than 300Hz. 3. The effect of the emitted engine noise was more remarkable than that of the pure sound for 3 minute continuously. On the feeding sound, fish formed a shoal and swimmed, but didn't gather around the underwater speaker. 4. The feeding and swimming sound spectra on rudder Hsh showed similar sound pressure distribution each other, they appeared low sound pressure in frequencies of 200-600Hz.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.395-404
• /
• 2012

In this paper, the perceived loudness metering algorithm based on ITU-R BS.1387-1 was investigated and implemented, and its performance was evaluated by applying to 23 pure tones and 9 digital audio samples. Error of the tone test results compared with ISO226:2003 was below 5%, and sample test results, in comparison with Moore's algorithm, showed deviation of less than 4.7% and correlation of 0.96. On the other hand, it was investigated how the implemented algorithm's performance was subject to auditory pitch scale. Its result showed that the algorithm with 37 auditory filters, through correcting a bias effect, has a good performance of less than 2% in comparison with the one with 109 auditory filters.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.6
• /
• pp.509-523
• /
• 2012

The sound quality based on design optimization, throughout the development process of various electronic office equipments, needs to be considered in order to respond the increased needs for the emotional satisfaction of customers in terms of psycho-acoustics. This paper focuses on how to describe the characteristics of operating sound radiated from laser printers by using various sound attributes, and to model the sound quality index that can properly evaluate the subjective preference on modification conditions in the improvement study quantitatively. Especially, the proposed verification process, in the form of combining the correlation based method and the decision error based method, was applied to improve the generality and reliability of a group of participants in the jury evaluation. The modified Aures tonality model was also proposed to improve the correlation coefficient with the mean response of participants by optimizing some parameters. As a result, the loudness, articulation index, roughness, tonality, fluctuation strength were used to model the sound quality index for laser printers by using the multiple-linear regression method. Through the improvement study, it was confirmed that replacing the absorbing materials is effective to reduce the tonalness radiated from the side of a reference printer model. Based on above results, it can be concluded that the proposed model has enough usefulness as quantitative evaluation index to evaluate the difference between modification conditions in the improvement study.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.3
• /
• pp.184-190
• /
• 2010

Lowering of auditory caused by noise is increased, these days. Especially, people who have noise induced hearing loss by permanent exposure to noise are increased according to spread out of multimedia and improvement of information equipment. The pure tone audiometry used in the hospital presently inspect auditory manually up to 8,000 Hz bandwidth. So the case of noise induced hearing loss which suffered from extended high frequency over 8,000 Hz, there is a problem to prevent hearing loss by precognition. In this paper, we proposed a method to prevent noise induced hearing loss by using extended high frequency bandwidth from 12,000 Hz to 20,000 Hz. We have got a experimental result to fifty of twenties who are often used to earphones through portable equipment. As a result, 36% of twenties show lowering of auditory caused by noise and 2% of them shows severe loss of hearing.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.185-188
• /
• 1999

음향 신호의 모델링방법은 크게 분석,해석,합성의 3가지 과정으로 나눌 수 있다. 본 논문에서는 분석과 합성에 가산 합성방법의 한가지인 Analysis-by-synthesis/overlap-Add 방법을 사용한다. 그리고 해석에 해당하는 주파수 영역에서의 피크추출은 제안한 방법에 의한다. 제안한 피크 추출 방법은 고조파 성분이 기본 주파수의 정수배가 된다는 점을 고려하여 적은 연산량으로 음향학적으로 의미있는 순음을 검출하는 방법이다. 음질보다 연산량에 더 주를 두었지만 모의 실험 결과를 통하여 음질 면에서도 원음과 거의 차이가 없음을 알 수 있었다.