• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.74-93
• /
• 2019

The Bird Track Site in the Haman Formation in Yongsanri (Natural Monument No. 222) was reported on the named Koreanaornis hamanensis and Jindongornipes kimi sauropod footprint Brontopodus and ichnospecies Ochlichnus formed by Nematoda. This site has outstanding academic value because it is where the second-highest number of bird tracks have been reported in the world. However, only 25% of the site remains after being designated a natural monument in 1969. This is due to artificial damage caused by worldwide fame and quarrying for flat stone used in Korean floor heating systems. The Haman Formation, including this fossil site, has lithofacies showing reddish-grey siltstone and black shale, alternately. The boundary of the two rocks is progressive, and sedimentary structures like ripple marks and sun cracks can clearly be found. This site was divided into seven formations according to sedimentary sequences and structures. The results of a nondestructive deterioration evaluation showed that chemical and biological damage rates were very low for all formations. Also, physical damage displayed low rates with 0.49% on exfoliation, 0.04% on blistering, 0.28% on break-out; however, the joint crack index was high, 6.20. Additionally, efflorescence was observed on outcrops at the backside and the northwestern side. Physical properties measured by an indirect ultrasonic analysis were found to be moderately weathered (MW). Above all, the southeastern side was much fresher, though some areas around the column of protection facility appeared more weathered. Furthermore, five kinds of discontinuity surface can be found at this site, with the bedding plane showing the higher share. There is the possibility of toppling failure occurring at this site but stable on plane and wedge failure by means of stereographic projection. We concluded that the overall level of deterioration and stability were relatively fine. However, continuous monitoring and conservation treatment and management should be performed as situations such as the physicochemical weathering of the fossil layer, and the efflorescence of the mortar adjoining the protection facility's column appear to be challenging to control.

• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.445-469
• /
• 2004

The Avatamsaka Sutra copied in ink on the white paper of Shilla Period is the oldest manuscript in korea. This Avatamsaka Sutra is volume 1-10 and 44-50 of the 80 volume's transcription. According to the postscript, written with 528 letters at the end of the volume 10 and 50, this sutra is made during A.D. 754-755, for six months by the order Master Yon-gi(綠起 法師) who founded Hwaumsa Temple(華嚴寺.) It explains the procedure of the ritual and production method of the sutra-copying, and also shows the 19 participants with their name, address, official title, and etc. When the sutra was founded, volume 1-10 were so congealed that we could not open the volumes. And volume 44-50 was prohibited to take photograph for preservation. According to the recent examination, it proved that this sutra is the treasure for the study of the characters made by Empress Wu Zetian(則天武后.) The characters made by Empress Wu Zetian(A.D. 625-705) are new shape of chinese characters which is different from the traditional characters. After the demise of the Queen, the characters were not used any more officially, but privately some people used the characters for personal tastes and interest. The characters in the sutra includes 512 characters of 13 kinds of Empress We Zetians'. Compared to the Tun-huang version of the sutra, this is far better treasure for the study of Empress We Zetians' characters in terms of the number of the character and the their use of frequency. The Avatamsaka Sutra of Shoso-in(正倉院) in japan copied in A.D. 768 does not use the Empress We Zetians' characters. In this respect, this Shilla Avatamsaka-Sutra is a unique one preserves the original forms of Chinese translation at that time.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.59-93
• /
• 2006

Wolseong in Gyeongju is a historic fortress site of Silla constructed under the reign of Pasanisageum that played politically and militarily important roles. The moat surrounding Wolseong had a function of protecting the fortress in wartimes but became a part of gardening in the unified Silla era. Lots of relics have been excavated from Wolseong moat since 1985. Among them a great number and kinds of convex roofing tiles are regarded as invaluable sources to show different aspects of Silla, from its earlier time through to the unified and on. Roofing tiles were widely used for national buildings such as royal palaces, temples and fortresses and even for other popular architecture and have been dug out a lot more than any other relics. Research on them, however, has been done poorly. Vigorous study is in progress with increasing number of roofing tiles coming from many recent excavations, though it has been limited to the studies on general genealogy of patterns and manufacture processes. Thus this essay seeks to find which are dongbeomwas, roofing tiles of a same mold, out of convex tiles with the pattern of a unilobed lotus flower dug out of Wolseong moat. It also attempts to identify dongbeomwas by examining detail characteristics of roofing tiles which have been confusingly termed as yusawa, similar roofing tiles, or donghyeongwa, roofing tiles of the same shape. The significance of identifying dongbeomwas could be emphasized by various facts resulting from researches on dongbeomwas; the ways to identify them correctly, their time sequence and their excavated sites. In conclusion, dongbeomwas were identified out of many kinds of convex tiles. If they were excavated from the same site, they share some common features. The sites where they were dug out also tell what changes were made with passage of time and what relations they had with neighboring Anapji. Since roofing tile molds haven't been found yet, the only way to identify dongbeomwas is to examine details of roofing tiles. Dongbeomwas excavated in Wolseong moat help to discuss the time of each district of it. Meanwhile it should be noted that the term 'dongbeomwa' be used only after exact examining.

• Korean Journal of Environment and Ecology
• /
• v.33 no.4
• /
• pp.472-480
• /
• 2019

Selection of the plant material for planting to reduce fine dust should comprehensively consider the visual characteristics, such as the shape and texture of the plant leaves and form of bark, which affect the adsorption function of the plant. However, previous studies on reduction of fine dust through plants have focused on the absorption function rather than the adsorption function of plants and on foliage plants, which are indoor plants, rather than the outdoor plants. In particular, the criterion for selection of fine dust reduction species is not specific, so research on the selection criteria for plant materials for fine dust reduction in urban areas is needed. The purpose of this study is to identify the priorities of eight indicators that affect the fine dust reduction by using the fuzzy multi-criteria decision-making model (MCDM) and establish the tree selection criteria for the urban planting to reduce fine dust. For the purpose, we conducted a questionnaire survey of those who majored in fine dust-related academic fields and those with experience of researching fine dust. A result of the survey showed that the area of leaf and the tree species received the highest score as the factors that affect the fine dust reduction. They were followed by the surface roughness of leaves, tree height, growth rate, complexity of leaves, edge shape of leaves, and bark feature in that order. When selecting the species that have leaves with the coarse surface, it is better to select the trees with wooly, glossy, and waxy layers on the leaves. When considering the shape of the leaves, it is better to select the two-type or three-type leaves and palm-shaped leaves than the single-type leaves and to select the serrated leaves than the smooth edged leaves to increase the surface area for adsorbing fine dust in the air on the surface of the leaves. When considering the characteristics of the bark, it is better to select trees that have cork layers or show or are likely to show the bark loosening or cracks than to select those with lenticel or patterned barks. This study is significant in that it presents the priorities of the selection criteria of plant material based on the visual characteristics that affect the adsorption of fine dust for the planning of planting to reduce fine dust in the urban area. The results of this study can be used as basic data for the selection of trees for plantation planning in the urban area.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.1
• /
• pp.1-13
• /
• 2019

The characteristics of the rock cleavage of Jurassic Geochang granite were analysed using the parameters from the length and spacing-cumulative frequency diagrams. The evaluation for three planes and three rock cleavages was performed using the 25 parameters such as (1~2) slope angle(${\alpha}^{\circ}$and ${\beta}^{\circ}$), (3) intersection angle(${\alpha}-{\beta}^{\circ}$), (4) exponent difference(${\lambda}_S-{\lambda}_L$), (5~12) length of line(oa, ob, ol, os, ss', ll' and sl') and (13~15) length ratio(ol/os, ss'/ll' and ll'/sl'), (16) mean length((ss'+ll')/2), (17~23) area (${\Delta}oaa^{\prime}$, ${\Delta}obb^{\prime}$, ${\Delta}obb^{\prime}$, ${\Delta}oaa_a^{\prime}$, ${\Delta}obb_a^{\prime}$, ${\Delta}ll^{\prime}s^{\prime}$, ${\Delta}ss^{\prime}l^{\prime}$ and ⏢$ll^{\prime}ss^{\prime}$) and (24~25) area difference(${\Delta}obb^{\prime}-{\Delta}oaa^{\prime}$ and ${\Delta}obb_a^{\prime}-{\Delta}oaa_a^{\prime}$). Firstly, the values of the 11 parameters(group I: No. 1, 3~4, 7, 9~10, 13, 15~16, 20 and 25), the 3 parameters(group II: No. 5, 8 and 17) and the 2 parameters(group III: No. 12 and 22) are in orders of H(hardway) < G(grain) < R(rift), R < G < H and G < H < R, respectively. On the contrary, the values of parameters belonging to the above three groups show reverse orders for three planes. Secondly, the generalized chart for three planes and three rock cleavages were made. From the related chart, the distribution types formed by the two diagrams related to lengths and spacings were derived. The diagrams related to spacings show upward curvature in the chart of rift plane(G1 & H1, R') and hardway(H1 & H2, H). On the contrary, the diagrams related to lengths show downward curvature. These two diagrams take the form of a convex lens in the upper section. Besides, the two diagrams cross each other in the lower section. The overall shape formed by the above two diagrams between three planes($H^{\prime}{\rightarrow}G^{\prime}{\rightarrow}R^{\prime}$) and three rock cleavages($R{\rightarrow}G{\rightarrow}H$) display in reverse order. Lastly, these types of correlation analysis is useful for discriminating three quarrying planes.

• The Korean Journal of Archival Studies
• /
• no.36
• /
• pp.35-67
• /
• 2013

As the office of crown properties expanded to financial structure having jurisdiction over various nation's purse in the Great Han Empire, its official document form has been changed. Unlike the early days, they had used official paper stamped with the words 'the Office of Crown Properties' eliminating 'Department of the Royal Household'. Also, the title on stamp of government position changed to 'Recipient of the Official of Crown Properties'. As the office of crown properties expanded as a great financial structure, it has grown in stature as an independent structure, and it was reflected in official document form. Such change was shown in document distribution system. The recipient of report from each district was the First Lord of Department of the Royal Household until 1897; however, the recipients of reports were mostly the office of Crown Properties from 1899. The Office of Crown Properties could not issue an official order before Aug 1899, since then the Office of Crown Properties had issued official orders to each district. However, the Office of Crown Properties could not handle the document in an equal position to the central organization yet. However, from Sep. 1900, the Office of Crown Properties handle the document with district organizations in equal position to the central organization, and a records office had been established in the Office of Crown Properties. Also, the Office of Crown Properties had handled official documents as an independent organization getting out of belonging organization to the department of Royal Household. Since the records office was established in Sep. 1900, the Office of Crown Properties had written receipt book autonomously. Comparing the receipt books in 1901 to the receipt books in 1905 and 1906, receipt numbers had been appeared from the book in 1905 and the organization in charge of the documents was recorded on some documents. Since no receipt book was found in 1902~1904, it is unknown when receipt number had been started indicating on the book. Seeing that the receipt number on the book of 1905 matched with contents on the receipt stamp, the receipt number has started indicating from around July, 1902; the period the receipt stamp has been started to use. Unlike the receipt stamp, the department in charge was indicated on the receipt book. It is because that the Office of Crown Properties changed writing system. Instead of classifying divisions, the Office of Crown Properties recorded in a book by order to receive, provided serial number, and wrote the department on the bottom of receipt book to classify by department in charge. Since establishment of the records office in Sep. 1900, the Office of Crown Properties had confirmed the receipt of document by stamping 'receipt of the Office of Crown Properties' and made receipt books as the office had started handled documents independently. Also, the Office of Crown Properties changed its system integrating division and recording in one book from the intial system classifying the book by division then receipt number and department in charge were indicated on the book. Also, receipt system has stabilized by stamping the receipt date and number on the received document.

• Journal of Broadcast Engineering
• /
• v.24 no.1
• /
• pp.118-131
• /
• 2019

In order to provide 8K UHD contents of terrestrial broadcasting with a large capacity, the terrestrial broadcasting system has various problems such as limited bandwidth and so on. To solve these problems, UHD contents transmission technology has been actively studied, and an 8K UHD broadcasting system using terrestrial broadcasting network and communication network has been proposed. The proposed technique is to solve the limited bandwidth problem of terrestrial broadcasting network by segmenting 8K UHD contents and transmitting them to heterogeneous networks through hierarchical separation. Through the terrestrial broadcasting network, the base layer corresponding to FHD and the additional enhancement layer data for 4K UHD are transmitted, and the additional enhancement layer data corresponding to 8K UHD is transmitted through the communication network. When 8K UHD contents are provided in such a way, user can receive up to 4K UHD broadcasting by terrestrial channels, and also can receive up to 8K UHD additional communication networks. However, in order to transmit the 4K UHD contents within the allocated bit rate of the domestic terrestrial UHD broadcasting, the compression rate is increased, so a certain level of image deterioration occurs inevitably. Due to the nature of UHD contents, video quality should be considered as a top priority over other factors, so that video quality should be guaranteed even within a limited bit rate. This requires packet scheduling of content generators in the broadcasting system. Since the multiplexer sends out the packets received from the content generator in order, it is very important to make the transmission time and the transmission rate of the process from the content generator to the multiplexer constant and accurate. Therefore, we propose a variable transmission scheduler between the content generator and the multiplexer to guarantee the image quality of a certain level of UHD contents in this paper.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2019

The aim of this study was to compare the degree of conversion and polymerization shrinkage of low and high viscosity bulk-fill giomer-based and resin-based composites. Two bulk-fill giomer (Beautifil Bulk Restorative (BBR), Beautifil Bulk Flowable (BBF)), two bulk-fill (Tetric N-Ceram Bulk-fill (TBF), SureFil SDR flow (SDR)) and two conventional resin composites (Tetric N-Ceram (TN), Tetric N-flow (TF)) were selected for this study. The degree of conversion was measured by using Fourier transform infrared spectroscopy. Polymerization shrinkage was measured with the linometer. For all depth, BBR had the lowest degree of conversion and SDR had the highest. At 4 mm, the degree of conversion of low and high viscosity bulk-fill giomer resin composites was lower than that of bulk-fill resin composites (p < 0.05). At the depth between 2 mm and 4 mm, there were significant difference with TBF, TN and TF (p < 0.05), while no significant difference in the degree of conversion was measured for BBR, BBF and SDR. Polymerization shrinkage of six resin composites decreased in the following order: TF > SDR > BBF > TBF > TN and BBR (p < 0.05). Polymerization shrinkage of bulk-fill giomer resin composites was lower than that of bulk-fill resin composites (p < 0.05). From this study, it is found that the bulk-fill giomer resin composites and TBF were not sufficiently cured in 4 mm depth. The degree of conversion of low and high viscosity bulk-fill giomer resin composites was significantly lower than bulk-fill resin composites in both 2 mm and 4 mm depths. Therefore, such features of bulk-fill giomer resin composites should be carefully considered in clinical application.

• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.170-177
• /
• 2019

The aim of this study was to investigate the effect of different concentrations of chlorine dioxide ($ClO_2$) on sterilization and deodorization of food-holding cabinets under different exposure times. For the measuring sterilization and deodorization, a 6.5 L chamber and a 625 L cabinet with circulation systems were used. Two bacteria (Staphylococcus aureus KCTC1916 and Escherichia coli KCTC 1682) that were artificially inoculated in the plate respectively were put into the 6.5 L chamber and the 625 L cabinet. The $ClO_2$ gas was produced by ampules. In the 6.5 L chamber, neither of the two bacteria was detected after 24 hours treatment by $ClO_2$ gas. Moreover, the deodorization rate against ammonia and phenol was 94% and 70%, respectively, but deodorization against formaldehyde was not effective. When the concentration reached maximum (6 ampule, 4.6 ppm) levels in the cabinet, it lasted for approximately 2 h and then decreased slowly. When a circulator was used, the gas concentration was very low (6 ampule, 0.8 ppm) and the antibacterial activity against S. aureus and E. coli was low. The level of reduction against S. aureus and E. coli was 2.98 log CFU/plate and 6.06 log CFU/plate, respectively, in the cabinet after 24 h without a circulator. The reduction against S. aureus KCTC1916 and E. coli KCTC1682 was 2.69 log CFU/plate and 4.41 log CFU/plate for 24 h, respectively.

• Korean Journal of Environmental Biology
• /
• v.39 no.3
• /
• pp.362-373
• /
• 2021

This study was conducted to establish mosquito distribution density and habitat in Sejong city for the prevention of mosquito-borne infectious diseases. The overall distribution of mosquitoes in the Sejong City was investigated, and the population density of mosquitoes in the old and new city was analyzed. Mosquito populations were determined using MOSHOLE and Blacklight traps once a week overnight. We also compared the mosquito population density of the old city and the new city, and the daily mosquito population was calculated using the data from the smart mosquito trap(DMS). Of all the study sites, Geumnam-myeon had the highest number of mosquitoes captured, and the dominant species were Armigeres subalbatus and Culex pipienspallens. Mosquito species with the potential for transmitting diseases were mainly found in Yeonseo-myeon (106 individual), and Geumnam-myeon (101). Mosquito collection rates by MOSHOLE trap and Blacklight trap were 58.49% and 41.51%, respectively. We concluded that using CO₂ would be the most suitable approach for collecting mosquitoes. The mosquito population density in the old city (92.05±7.04) was approximately twice that of the new city(51.50±4.05). Since Sejong City is divided into old city and new city, it is difficult to spot remarkable effects in a standardized way. For effective quarantine, differentiation of quarantine must be established. This study results provide a basis for Sejong City's integrated mosquito control guidelines, and therefore effective control of which we believe will help control the spread of mosquito-borne diseases and reduce damage from mosquitoes.