• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.77-84
• /
• 2012

It is known that some components of wood obstruct the hydration of cement when wood is mixed with cement. In order to examine the effect of pretreatment of wood chips in hot water, this study conducted the experiments for the setting and compressive strength of mortar by sieving pine wood chips with a 2.4mm sieve, dipping them in waters of different temperatures, and then using them as a part of the fine aggregate. For the experiments, water-cement ratio of the mortar was 0.50 and the amount of the fine aggregate substituted by wood chips was set at 0%, 2%, 4%, 6%, 8%, and 10% of the mass of the fine aggregate. As a result of the test, it was found out that when wood chips were used to substitute fine aggregate for the production of mortar, more usage of wood chips postponed setting more, and the treatment of wood chips with water improved the problem of the delay in setting time. Especially, the final setting time of the mortar which used 2~6% of wood chips treated in $100^{\circ}C$ water for 30 minutes was almost the same as the final setting time of the mortar which used no wood chips. Also, the compressive strength of the mortar which used the wood chips treated with water was compared to that of the mortar which used the wood chips not treated with water. The result showed that the strength improved for age of 7 days and 28 days, while there was little change in strength for age of 3 days.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.1
• /
• pp.56-60
• /
• 2005

In order to increase the storage stability of watermelon stalk, storage environments such as temperature and other treatments such as vaseline, mixture of soybean oil and wheat flour, and coated paper label were tested separately after harvesting. At different storage temperatures (7, 18 and $30^{\circ}C$) shelf-life of stalk was inversely proportional to temperature. The results showed that during storage at $30^{\circ}C$ they were completely wilted in 7 days, at $18^{\circ}C$ in 15 days and at $7^{\circ}C$ in 19 days. Our data also showed that stability of watermelon stalk depending on temperature was very closely correlated with water content of watermelon stalk; during storage at $30^{\circ}C$ the water content of watermelon stalk was decreased to 21.1 % in 7 days, whereas at $7^{\circ}C$ the water content was decreased gradually to 71.2 % for 19 days of storage. In order to reduce the physiological changes in watermelon stalk at $30^{\circ}C$, following treatments such as vaseline, mixture of soybean oil and wheat flour, and coated paper label were tested. As a result, watermelon stalk without any treatment was completely wilted in 9 days, while stalks treated with vaseline and mixture of soybean oil with wheat flour were wilted in 15 and 12 days, respectively. The wilt delay was noted in the watermelon stalk for $3{\sim}6$ days during both treatments but the outward quality was found detracted, whereas when treated with coated paper label, the wilt of stalk was delayed for 3 days along with the improvement in the outward quality. Therefore this data indicate that the treatment of coated paper label during storage at $30^{\circ}C$ can be considered as a potent method for maintaining the physiology of watermelon stalk.

• The Korean Journal of Air & Space Law and Policy
• /
• v.19 no.2
• /
• pp.9-53
• /
• 2004

This paper described the contents of theme entitled "Domestic Legislative Problems on the Civil Liability of Air Carrier in Korea" including the current example of fourteen countries' legislation ((1) Great Britain, (2) United States of America, (3) Canada, (4)European Union), (5) Germany, (6) France, (7) Italy, (8) Spain, (9) Swiss, (10) Australia, (11) Japan, (12) People's Republic of China, (13) Taiwan, (14) North Korea) relating to the aviation law or air transport law. Though the Korean and Japanese aviation act has provided only the public items such as (1) registration of aircraft, (2) persons engaged in aviation, (3) operation of aircraft, (4) aviation facilities including airport, (5) air transport business, (6) investigate of aircraft accidents etc., but they could not regulated the private items such as the legal relations of the air transport contract (1) air passenger ticket, (2) air luggage ticket, (3) airway bill, (4) liability of air carrier, (5) amount of compensation for damage caused by aircraft accidents, (6)jurisdiction, (7) arbitration, (8) limitation of action, (9) combined carriage, (10) carriage by air performed by an actual carrier other than contracting carrier, damage caused by aircraft to the third parties etc. in their aviation act until now. In order to solve speedily the legal problems on the limitation of air carrier's liability and long law suit and disputes between wrongdoers and survivors etc, it is necessary and desirable for us to enact a new "Draft for the Air Transport Act" including the abovementioned private items. I would like to propose personally and strongly the legislation of "Draft for the Air Transport Act" in Korea in emphasizing the importance of ensuring protection of the interests of consumers air passengers and shippers in carriage by air and the need for equitable compensation between air carriers and survivors caused by the aircraft accidents such as the German Air Transport Act (Luftverkerhrsgesetz).

• Journal of Veterinary Clinics
• /
• v.31 no.3
• /
• pp.180-193
• /
• 2014

Allergic contact dermatitis (ACD) is an inflammatory skin disease and regarded as a prototype of T-cell mediated delayed-type hypersensitivity reactions. Aroma Oil Complex (AOC) is composed of lavender true oil, chamomile roman oil and tea tree oil. This study was performed to assess the effects of AOC in a canine model of ACD. ACD was induced on the back of dogs induced by sensitization and repeated application by 2,4-dinitro-1-chlorobenzene (DNCB). Topical treatment of AOC was applied once a day for 8 days and skin biophysical parameters including transepidermal water loss (TEWL), skin hydration, skin thickness and erythema index, were measured every two days during experimental periods. Histopathology and immunohistochemistry were performed to evaluate the anti-inflammatory effect. In skin biophysical parameters, TEWL, skin hydration, skin thickness and erythema index were significantly increased, with a maximum increase appeared on day 2 (p<0.05). After the completion of AOC treatment, skin biophysical parameters were significantly reached those of baseline in a time-dependent manner (p<0.05). In histopathology, marked increases of epidermal thicknesses were induced after DNCB challenge with numerous inflammatory cell infiltrations and edematous changes, decreases of connective tissue occupied regions in dermis. In addition, marked increases of cytokine - tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$) and interferon-${\gamma}$ (IFN-${\gamma}$)-immunoreactivities in the dermis and of apoptotic markers - caspase-3 and PARP-immunoreactivities in the epidermis were observed in DNCB control as compared with intact control, respectively (p<0.01). The decrease of infiltrated inflammatory cells and related decreases of pro-inflammatory cytokine immunoreactivities were observed in AOC treated skin (p<0.01). Based on these findings, AOC may have anti-inflammatory and alleviatory effects in the allergic contact dermatitis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.21-29
• /
• 2017

Cold joint caused by construction delay is vulnerable to shear stress and it allows more rapid chloride penetration and diffusion. In the paper, investigation of chloride diffusion coefficient is performed for 1-year cured concrete considering compressive and tensile loading level and cold joint. The results are compared with the previous results in 91-day cured concrete. In the 1-year cured concrete without loading, 10.7% and 10.5% of diffusion reduction are evaluated for those in 91-day cured concrete, respectively. The reduction ratios are almost similar however the result in cold joint concrete shows much higher values. The results in 1-year cured concrete under 30% and 60% of compressive loading show reduction of chloride diffusion by 10.9% and 5.8% compared with 91-day cured results, which is caused by steady hydration of cement particles, so called, time effect. In the case of tensile loading, the differences in results are not significant regardless of time effect and cold joint since micro cracks which is weak point of concrete is much dominant despite of long term curing.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.88-94
• /
• 2012

This study is conducted to utilize waste concrete powder made as a by-product manufacturing high quality recycled aggregate. The blaine fineness of the used waste concrete powder was 928 and $1,360cm^2/g$. As the main characteristic of waste concrete powder, it showed an angular type similar to cement, but hydrated products were attached on the surface of particles. In addition, the size of the particles of waste concrete powder was larger than OPC and in terms of chemical components it had higher $SiO_2$ contents. The viscosity of the paste that mixed waste concrete power decreased by 62% at the most, compared to the paste that only used OPC, and the final set time was delayed about two hours. As composition rates of waste concrete powder increased, the flow value decreased by 30% at the most according to the comparison with mortar that only used OPC, and sorptivity coefficients increased by 70%. The compressive strength of mortar decreased by 73% at the most as composition rates of waste concrete powder increased. According to the test results, it is desirable to use waste concrete powder by combining OPC appropriately(below 15%).

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.307-315
• /
• 2016

The aim of this research is analyzing the fundamental properties and autogenous shrinkage reducing performance of 70 and 100MPa grade high performance concrete including emusified refined cooking oil(ERCO) under the mock-up conditions. As a results of experiment, the mixture contained 0.5% of ERCO showed slightly decreased slump flow while the slump was increased and segregation resistance performance was improved as 2.5 of EIS. For air content, all mixtures satisfied target air content with increased unit weight and delayed setting time with ERCO addition. In the case of compressive strength, when ERCO was added 0.5%, the result of approximately 5 to 10% of increased compressive strength was observed. For the autogenous shrinkage, ERCO contributed on 20-30% of shrinkage reducing performance comparing to Plain mixture without ERCO. It is considered that capillary pore filling action of soap particles occurred by the reaction of ERCO in cement paste between fatty aicd and calcium hydroxide contributed the shrinkage reducing performance. Based on these mock-up test results, application of the high performance concrete mixture with ERCO on CFT actual structure was decided.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5A
• /
• pp.307-315
• /
• 2012

Recently, ultra high performance fiber reinforced concrete (UHPFRC) having over 180 MPa compressive strength and 10 MPa tensile strength has been developed in Korea. However, UHPFRC represents different material properties with normal concrete (NC) and conventional high performance concrete (HPC) such as a high early age autogenous shrinkage and a rapid dry on the surface, because it has a low water-binder ratio and high fineness admixtures without coarse aggregate. In this study, therefore, to propose suitable experimental methods and regulations, and to evaluate mechanical properties at a very early age for UHPFRC, setting, shrinkage and tensile tests were performed. From the setting test results, paraffin oil was an appropriate material to prevent drying effect on the surface, because if paraffin oil is applied on the surface, it can efficiently prevent the drying effect and does not disturb or catalyze the hydration of cement. From the ring-test results, it was defined that the shrinkage stress is generated at the time when the graph tendency of temperature and strain of inner steel ring is changed. By comparing with setting test result, the shrinkage stress was firstly occurred as the penetration resistance of 1.5 MPa was obtained, and it was about 0.6 and 2.1 hour faster than those of initial and final sets. So, the starting time of autogenous shrinkage measurement (time-zero) of UHPFRC was determined when the penetration resistance of 1.5 MPa was obtained. Finally, the tensile strength and elastic modulus of UHPFRC were measured from near initial setting time by using a very early age tensile test apparatus, and the prediction models for tensile strength and elastic modulus were proposed.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.797-807
• /
• 2008

For this study, the semi-adiabatic temperature rising test is accomplished by using ternary system cement (OPC, BFS, FA) reducing temperature crack. Two tests are conducted; one is for the paste test, and the other is for the concrete test. As the results of paste tests, using fly ash is better to reduce hydration temperature than doing blast furnace slag. In the case of the paste mixed ternary system cement, the more fly ash is mixed and the less blast furnace slag is used, the lower the temperature is. The less the mixture ratio of blast furnace slag is and the more the mixture ratio of fly ash is, the later the temperature rising velocity and descending velocity are. Besides, the temperature is lower if water/binder ratio is high. The use of ternary system cement has the retardation effect of temperature rising because the time to reach the maximum temperature is in the order of OPC100, binary system cement, and ternary system cement. From the test, the maximum temperature of concrete used ternary system cement is $8{\sim}11^{\circ}C$ lower than that of concrete used OPC100. Moreover, temperatures rising velocity and descending velocity of ternary system cement range $47{\sim}51%$ and $37{\sim}42%$ compared with OPC100. The specimen of concrete shows remarkable low internal temperature and slow temperature rising velocity and descending velocity compared with the specimen of paste because it is that temperature loss of concrete is much more than paste specimen according to aggregates.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.5
• /
• pp.405-412
• /
• 2016

In order to examine the possibility of practical use of concrete at low-temperature environment using high early strength cement with cold resistance admixture, an experimental study on workability, freezing temperature and compressive strength of the mortar with different types of anti-freezer, water reducing agent and accelerator for freeze protection at low-temperature were evaluated. Compressive strength was increased in use of anti-freezer, especially SN anti-freezer was higher than CN anti-freezer. 0min flow was increased, the 20min flow was decreased. And 20min flow was improved in use of FR, RT water reducing agent. CF, LS accelerator for freeze protection, regardless of the type of water reducing agent, compressive strength was increased.