• Journal of the Mineralogical Society of Korea
• /
• v.23 no.2
• /
• pp.151-159
• /
• 2010

The effect of calcite and gypsum on the hydration of Portland cement was investigated using GEM-PSI, a geochemical model. Addition of calcite and gypsum up to 5 wt% of total cement clinker into Portland cement was found to influence the hydrate assemblage of the hydrated cement in different ways. The results of geochemical modelling showed that the fraction of calcium monocarbonate increased by the hydration of cement with the increase of calcite addition. The results of modelling also indicated that gypsum increased the fraction of ettringite in the assemblage of hydrated cement as the amount of gypsum added increases. This study showed that porosity generated by the hydration of cement had a significant relation with the amount of calcite and gypsum added. The porosity of hydrated cement was lower when calcite added up to 3 wt% of cement clinker compared to the hydrated cement with the same amount of gypsum addition. However, when calcite added more than 3% of cement clinker, the porosity of hydrated cement were higher than that of hydrated cement with the same amount of gypsum addition.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.363-364
• /
• 2009

The activity and stability test of low-temperature(850 $\sim$ 1,000 ${^\circ}C$) firing MgO which is expected to improve the performance of the crack resistance wee conducted and The degree of hydration for the 10% MgO-mixed cement paste was analyzed after 1day, 3days, 7days, 28days, 56days, 90days, and 180days using SEM, XRD, DSC.

• Cement
• /
• s.128
• /
• pp.24-29
• /
• 1992

• Resources Recycling
• /
• v.24 no.1
• /
• pp.12-20
• /
• 2015

In this study, change of hydration property with contents and type of gypsum in ternary natural hydraulic lime containing blast furnace slag and gypsum was investigated. Anhydrite, hemihydrate and dihydrate were added 3 % and 10 %, respectively in natural hydraulic lime adding blast furnace slag 20 %. Hydration and physical behavior due to solubility and reactivity of different types of gypsum were analyzed in early hydration. As a result of analysis of hydration properties, in all samples, hydrates such as ettringite and C-S-H were produced in early hydration, and amount of hydrates with increase of hydration time was increased. In the case of compressive strength, when contents of gypsum are 3 %, it was higher compressive strength than other specimens. At hydration 28 days, for addition of anhydrite and hemihydrate, compressive strength was more than adding dihydrate.

• Cement Symposium
• /
• s.39
• /
• pp.128-136
• /
• 2012

• Journal of the Korea Concrete Institute
• /
• v.27 no.1
• /
• pp.3-9
• /
• 2015

In this study, hydration properties of ordinary Portland cement were examined, shown from a limestone and blast furnace slag alone or their mixture up to 10% as a minor mineral additives. As of setting time, it was identified that final setting became faster as the amount of limestone mixture increased, which showed limestone accelerated early hydration faster than blast furnace slag. This is because limestone did accelerate the hydration of alite. At the age of 3 days, limestone 5%-blast furnace slag 5% mixture had the highest compressive strength of mortar. It is because hydration acceleration of alite by limestone, and $Ca(OH)_2$ that was additionally formed by hydration acceleration of alite reacted with blast furnace slag, and as a result, additionally created C-S-H hydrate. Regarding the hydration properties by the age of 7 and 28 days, limestone 3%-blast furnace slag 7% of composited mixture showed the largest compressive strength, and in comparison with the 3 days in curing age. This period is when hydration reaction of blast furnace slag is active and the amount of hydrate depends on the amount of blast furnace slag mixture more than that of the limestone mixture. And in order to vitalize hydration reaction of blast furnace slag the amount of $Ca(OH)_2$ created has to increase, and thus, a small amount of limestone is necessary that can accelerate the hydration of alite. Therefore, after the age of 7 days, the fact that there were a large amount of blast furnace slag mixture and small amount of limestone mixture was effective to the strength development of ordinary Portland cement.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.770-772
• /
• 2010

기존의 연구는 열화에 의한 물리적 평가 및 열화에 영향을 미치는 수화생성물의 존재여부에 대한 연구는 활발하게 이루어지고 있으나, 그에 따른 수화생성물의 정량화에 대한 연구는 미흡한 실정이다. 본 논문은 XRD 분석 기법을 이용하여 원전 콘크리트 구조물에 대해 열화요인 중 탄산화와 황산염에 대한 상대적 정량화에 대한 연구를 실시하였다. 두 열화인자는 콘크리트 내의 수산화칼슘과 반응하여 에트린가이트와 탄산칼슘을 생성하게 되는데, 본 연구에서 열화인자에 대한 노출기간이 증가할수록 열화에 영향을 미치는 수화 생성물이 증가하는 것을 확인 할 수 있었다. 그에 따른 수산화칼슘의 양이 감소하는 것도 확인 할 수 있었다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.545-548
• /
• 2008

In this study aluminium sulfate, Ca(OH)$_2$, K-R Slag and $Na_2SO_4$ were used as active admixtures and their concentration 1, 3, 5, 7 weight percent in cement. The physical properties of active admixtures cement mortar were investigated by flow test and compressive strength. It was found that the resulting active admixtures exhibited the higher compressive strength than OPC mortar up. From the test results, cement mortars added active admixture have a good fundamental property.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.17-25
• /
• 2010

We studied on the watertightness improvement of cementitious material for durability enhancement of concrete. For improvement of watertightness of OPC and OPC with fly ash, we used various materials with watertightness properties to OPC and OPC with fly ash. The performance of watertightness improvement of cementitious materials closely related to formation of CSH by pozzolanic reaction and to reducing of size of contact angle in cement pore by using organic fatty acid. And volume of CSH formation at early hydration have an influence of watertightness improvement and reduction of long-term water absorption rate. In using of fly ash, improvement of workability by using the spherical fly ash caused to densify on the structures of cement material and CSH formation by pozzolanic reaction and cement using fly ash also caused watertightness improvement of cementitious materials. For improvement of concrete durability by watertightness, cementitious materials need using watertightness materials and at using fly ash, also it have to the effect of improvement of watertightness of cementitious materials by pozzolanic reaction.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.488-495
• /
• 2017

In this study, we conducted the kinetic hydration modeling of OPC and the final product according to the substitution ratio of GGBS by using the geochemical code, GEMS, in order to calculate the thermodynamic equilibrium. The thermodynamic data was used by GEMS's 3rd party database, Cemdata18, and the cement hydration model, the Parrot & Killoh model was applied to simulate the hydration process. In OPC modeling, ion concentration of pore solution and hydration products by mass and volume were observed according to time. In the GGBS modeling, as the substitution rate increases, the amount of C-S-H, which contributes the long-term strength, increases, but the amount of Portlandite decreases, which leads to carbonation and steel corrosion. Therefore, it is necessary to establish prevention of some deterioration.