• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.spc
• /
• pp.18-22
• /
• 2022

Because it is difficult to apply direct and optical detection techniques to sunken hazardous and noxious substances (HNS), effective acoustic detection techniques are required to detect sunken HNS in water. In this study, the possibility of acoustic detection of sunken HNS was investigated through backscattering signal measurement experiments using chloroform, a sunken HNS. After establishing a pool in an acrylic tank, backscattering signals were measured according to the presences or absence of chloroform by varying the grazing angle from 90° to 50° in 0.5° intervals using a pan&tilt system. A directional transducer transmitted and received sinusoidal signals with a frequency of 200 kHz and a pulse length of 25 ㎲ in a monostatic state. When chloroform was deposited, the received level of the backscattering signal at the interface between water and chloroform became low at a grazing angle of approximately 80° or smaller. Based on the backscattering signal results obtained at the interface between water and chloroform, the possibility of acoustic detection of sunken HNS was demonstrated.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.153-156
• /
• 2007

인간의 시각 시스템은 선택적 주의 집중에 의해 시각 수용체로 도달되는 많은 물체들 중에서 필요한 정보만을 추출하여 원하는 작업을 수행한다. Itti와 Koch는 시각적 주의를 제어할 수 있는, 신경계를 모방한 계산적 모델을 제안하였으나 조명환경에 고정적인 saliency map을 구성하였다. 따라서, 본 논문에서는 영상에서 ROI(region of interest)을 탐지하기 위한 조명환경에 적응적인 saliency map 모델을 구성하는 기법을 제시한다. 변화하는 환경에서 원하는 특징을 부각시키기 위하여 상황에 적응적인 동적 가중치를 부여한다. 동적 가중치는 conspicuity map에 S.K. Chang이 제안한 PIM(Picture Information Measure)을 적용시켜 정보량을 측정한 후, 이에 따라 정규화된 값을 부여함으로써 구현한다. 제안하는 조명환경에 강인한 적응적인 saliency map 모델 구현의 성능을 얼굴검출 실험을 통하여 검증하였다.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_1
• /
• pp.535-543
• /
• 2022

A drone is used to diagnose crop growth and to provide information through images in the agriculture field. In the case of using high spatial resolution drone images, growth information for each object can be produced. However, accurate object detection is required and adjacent objects should be efficiently classified. The purpose of this study is to develop a Chinese cabbage object detection algorithm using multispectral reflectance images observed from drone and computer vision techniques. Drone images were captured between 7 and 15 days after planting a Chinese cabbage from 2018 to 2020 years. The thresholds of object detection algorithm were set based on 2019 year, and the algorithm was evaluated based on images in 2018 and 2019 years. The vegetation area was classified using the characteristics of spectral reflectance. Then, morphology techniques such as dilatation, erosion, and image segmentation by considering the size of the object were applied to improve the object detection accuracy in the vegetation area. The precision of the developed object detection algorithm was over 95.19%, and the recall and accuracy were over 95.4% and 93.68%, respectively. The F1-Score of the algorithm was over 0.967 for 2 years. The location information about the center of the Chinese cabbage object extracted using the developed algorithm will be used as data to provide decision-making information during the growing season of crops.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.611-617
• /
• 2018

The application of health monitoring, including a fault detection technique, is needed to secure the structural safety of large structures. A 2-step crack identification method for detecting the crack location and size of the beam structure is presented. First, a crack occurrence region was estimated using the modified Laplacian operator for the strain mode shape obtained from the distributed local strain data. The crack location and size were then identified based on the natural frequencies obtained from the acceleration data and the neural network technique for the pre-estimated crack occurrence region. The natural frequencies of a cracked beam were calculated based on an equivalent bending stiffness induced by the energy method, and used to generate the training patterns of the neural network. An experimental study was carried out on an aluminum cantilever beam to verify the present method for crack identification. Cracks were produced on the beam, and free vibration tests were performed. A crack occurrence region was estimated using the modified Laplacian operator for the strain mode shape, and the crack location and size were assessed using the natural frequencies and neural network technique. The identified crack occurrence region agrees well with the exact one, and the accuracy of the estimation results for the crack location and size could be enhanced considerably for 3 damage cases. The presented method could be applied effectively to the structural health monitoring of large structures.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.3
• /
• pp.479-490
• /
• 2013

Recently, the number of attacks by malicious application has significantly increased, targeting Android-platform mobile terminal such as Samsung Galaxy Note and Galaxy Tab 10.1. The malicious application can be distributed to currently used mobile devices through open market masquerading as an normal application. An attacker inserts malicious code into an application, which might threaten privacy by rooting attack. Once the rooting attack is successful, malicious code can collect and steal private data stored in mobile terminal, for example, SMS messages, contacts list, and public key certificate for banking. To protect the private information from the malicious attack, malicious code detection, rooting attack detection and countermeasure method are required. To meet this end, this paper investigates rooting attack mechanism for Android-platform mobile terminal. Based on that, this paper proposes countermeasure system that enables to extract and collect events related to attacks occurring from mobile terminal, which contributes to active protection from malicious attacks.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.4
• /
• pp.275-281
• /
• 2019

A synthetic aperture radar(SAR) satellite is more effective than an optical satellite for target analysis because an SAR satellite can provide two-dimensional electromagnetic scattering distribution of a target during all-weather and day-and-night operations. To conduct target analysis while considering the earth observation interval of an SAR satellite, observing a specific area as wide as possible would be advantageous. However, wider the observation area, worse is the resolution of the associated SAR satellite image. Although conventional methods for improving the resolution of radar images can be employed for addressing this issue, few studies have been conducted for improving the resolution of SAR satellite images and analyzing the performance. Hence, in this study, the applicability of conventional methods to SAR satellite images is investigated. SAR target detection was first applied to Korea Multipurpose Satellite-5(KOMPSAT-5) SAR images provided by Korea Aerospace Research Institute for extracting target responses. Extrapolation, RELAX, and MUSIC algorithms were subsequently applied to the target responses for improving the resolution, and the corresponding performance was thereby analyzed.

• Korean Journal of Remote Sensing
• /
• v.26 no.4
• /
• pp.403-410
• /
• 2010

NDVI(Normalized Difference Vegetation Index), which is broadly used as short-term data composite, is an important parameter for climate change and long-term land surface monitoring. Although atmospheric correction is performed, NDVI dramatically appears several low peak noise in the long-term time series. They are related to various contaminated sources, such as cloud masking problem and wet ground condition. This study suggests a simple method through harmonic analysis for reducing NDVI noise using SPOT/VGT NDVI 10-day MVC data. The harmonic analysis method is compared with the polynomial regression method suggested previously. The polynomial regression method overestimates the NDVI values in the time series. The proposed method showed an improvement in NDVI correction of low peak and overestimation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.249-255
• /
• 2013

In this paper, we propose an algorithm to detect scale invariant object from IR image obtained in the sea environment. We create horizontal edge (HL), vertical edge (LH), diagonal edge (HH) of images through 2-D discrete Haar wavelet transform (DHWT) technique after noise reduction using morphology operations. Considering the sea environment, Gaussian blurring to the horizontal and vertical edge images at each level of wavelet is performed and then saliency map is generated by multiplying the blurred horizontal and vertical edges and combining into one image. Then we extract object candidate region by performing a binarization to saliency map. A small area in the object candidate region are removed to produce final result. Experiment results show the feasibility of the proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.89-97
• /
• 2002

This paper proposes the adaptive digital watermarking method for the ownership protection of images. The watermarks are inserted to a selected area rather than a whole area. The proposed method reduces the distortion caused by the watermarking process. To select the regions, roughness of the image should be considered because the watermarks in the smooth regions are easily detected through the human eyes. To find the rough regions, Discrete Cosine Transform (DCT) method is used. Generally, the high frequency regions of images are lost by the compression process such as JPEG. So, the watermarks are inserted to the low frequency regions of a selected area by using the proposed method. The proposed method reduce the image loss or distortion brought by the image processing, such as compression, filtering, scaling, addition of noise, cropping, and wavelet transform.

• The KIPS Transactions:PartB
• /
• v.19B no.1
• /
• pp.9-18
• /
• 2012

Many audio watermarking researches which have been adapted to authenticate contents can not recover the original media after watermark removal. Therefore, reversible watermarking can be regarded as an effective method to ensure the integrity of audio data in the applications requiring high-confidential audio contents. Reversible watermarking inserts watermark into digital media in such a way that perceptual transparency is preserved, which enables the restoration of the original media from the watermarked one without any loss of media quality. This paper presents a new interval-based audio integrity authentication algorithm which can detect malicious tampering. To provide complete reversibility, we used differential histogram-based reversible watermarking. To authenticate audio in parts, not the entire audio at once, the proposed algorithm processes audio by dividing into intervals and the confirmation of the authentication is carried out in each interval. Through experiments using multiple kinds of test data, we prove that the presented algorithm provides over 99% authenticating rate, complete reversibility, and higher perceptual quality, while maintaining the induced-distortion low.