• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.165-170
• /
• 2006

A two dimensional(2-D) finite-difference time-domain(FDTD) method based on a novel finite difference scheme is developed to eliminate the numerical dispersion errors. In this paper, numerical dispersion and stability analysis of the new scheme are given, which show that the proposed method is nearly dispersionless, and stable for a larger time step than the standard FDTD method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.5
• /
• pp.99-106
• /
• 2006

In this paper, implementation of active mufflers using multiple channel adaptive IIR filter is presented. Usually, recursive LMS(RLMS) algorithms for adaptive IIR filters are highly efficient than filtered-X LMS(FXLMS) algorithms, when the order of both algorithms are the same. However, RLMS algorithms usually diverge before the algorithms arenot yet converged. So, the prefilters are presented to improve the stability by pulling the poles of feedback control transfer function in the beginning of active noise control and returning the original poles after the filters converge. The engine noises of diesel engine automobiles and gasoline engine automobiles are analyzed and the mathematical model of an active muffler is derived. Computer simulations and experiments are performed to show the effectiveness of the proposed systems.

• Journal of Biosystems Engineering
• /
• v.16 no.1
• /
• pp.27-36
• /
• 1991

This study was carried out getting basic data for developing a new combine which is suitable for the cultivating situation in Korea or Southeast Asia. The relation of the amount of unthreshed grains and the axial displacement of crop in threshing process was attempted to formulate mathematically in a threshing chamber of axial-flow threshing unit. It was found that unthreshed grain is an exponetially-decaying functon of axial displacement of grains based on available data. Threshing experiments were performed to validate the mathematical model by changing various levels of pertinent variables for malting barley. Good correlation were obtained between the theoretical calculation and observed data for various test conditions, such as inclination, vane pitch, concave length, drum speed, feeding velocity, stream weight, moisture content. Therefore the model can be used for general purpose to find the amount of unthreshed grain if the mean rate of occurence of threshing of kernels(${\lambda}_{\tau}$) is properly calibrated considering some other operating conditions and crop conditions which are not involved in this analysis.

• Composites Research
• /
• v.16 no.6
• /
• pp.10-15
• /
• 2003

In RTM process, the content of microvoids can be critical due to the fact that the presence of microvoids degrades mechanical properties on the fabricated composite parts. The present paper proposes an experimental method of observation in void formation and transport. VARTM processes are performed under observation with a digital video camera and then the microvoid formation in the flow front and transport are videotaped and observed both in channels and tows. The obtained data are used in the mathematical model in order to determine the model constants. Experimental results and expected results from the mathematical model show a good agreement with each other.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.717-722
• /
• 2011

This paper presents that the electronic controller is developed for controlling the setting temperature and water in the ceramic pipe system. The heating water system is designed for controlling the temperature to supply the heat through the ceramic pipe heater to input the water, also for controlling quantity of water using the water sensor and impeller. The control method of the heating water system is applied the mathematic modeling of the ceramic pipe heater on the suppling the heat at coming water, and the test result of the electronic controller is present to smartly control the setting temperature, therefore the ceramic pipe heater is proposed to be able to apply the heating structure and the control methods as a product.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.1
• /
• pp.74-82
• /
• 1988

A numerical analysis of the mathematical model for fluidized bed coal combustion has been performed. Based on the physical nature of the specific surface variation due to the decreasing of coal particle diameter according to the combustion process, the modified model which has been added the specific surface variation to the S.ENDRENYI and B.PALANCZ's mathematical model was established in this study. From the numerical analysis of these two models, it was found that the perfect combustion time is increasing largely at least 5 seconds in the modified model in comparison with that of the S.ENDRENYI and B.PALANCZ's model, and the bed temperature and the coal particle surface temperature during the main combustion period represent constant with time in the S.ENDRENYI and B.PALANCZ's model, on the other hand, these properties are decreasing linearly with time in the modified model.

• Journal of Korean Society of Forest Science
• /
• v.34 no.1
• /
• pp.57-62
• /
• 1977

Der Zuwachs des Durchmessers des Einzelbaumes kann durch die Differenzialgleichung dx/dt=k(M-x)+f(t) beschrieben werder, wobei f(t) die von den zuf$\ddot{a}$lligen $\ddot{A}$nderungen der Umwelt bedingte Fluktuation des Wachstums bedeutet. Nach dieser Gleichung kann das Wachstum des Durchmessers des Einzelbaumes in zwei Teile zerlegt werden: der erste systematische Teil k(M-x) repr$\ddot{a}$sentiert den Trend des Wachstums und der zweite Teil die Fluktuation f(t), die f$\ddot{u}$r die Wald bewirtschaftung von Praktischer Bedeutung ist. Die Studie zeigt die mathematische Ableitung zur Bestimmung von f(t).

• Nuclear Engineering and Technology
• /
• v.17 no.1
• /
• pp.45-52
• /
• 1985

A two inverted U-tubes condenser was constructed from transparent materials to study the heat removal capability of steam generators under filmwise reflux condensation mode. Essentially, two sets of experiments were performed: (1) the first dealt with the reflux condensation length, and (2) the second dealt with the flooding points with and without the presence of a noncondensible gas in the steam flow, and the effect of the flooding time. In addition, experimental results are compared with the predictions of analytical models.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.2
• /
• pp.57-66
• /
• 1987

본 연구는 경관선호에 관한 평가방법을 서술적으로 구명하면서 기존의 경관선호에 관한 평가방법이 자연적 요소를 많이 포함한 경관의 평가출 정착히 하는데 따르는 문제점을 제시하고 경관의 우연적 국면에 따라 경관선호의 우연성(Contingency in Landscape Preference)을 개관하면서 경관평가의 우연성(Contingency in Landscape Evaluation)에 의한 우연적 경관평가방법(Contingent Approach in Landscape Evaluation)의 가능성을 시사했다. 최근까지의 경관평가방법을 크게 분류하면 총체적(Universal) 접근방법, 개성적(Idiosyncratic) 접근방법, 조화적(Contrastic) 접근방법 등으로 나눌 수 있다. 그런데 경관성에서의 우연성을 강조함 으로써, 앞의 세방법만을 가지고서는 경관의 실체 파악이 어렵기 때문에 새로운 방법이 강구되어야 한다. 이의 한 대안으로 경관선호에 대한 평가를 우연적 접근방법으로 해결함으로써 평가영역과 평가요소를 확장시킬 수 있다. 따라서 수학적 매트릭스가 가능하다는 시사를 본 연구에서 구시하면서 새로운 평가방법으로 우연적 경관평가방법을 제시했다. 우연적 경관평가방법은 우연적 경관성에 의한 심미성을 고려하여 종합적으로 분석할 수 있으나 우연적 영역을 의도적으로 설정하지 않는 한 현실적으로 재정적 흑은 시간적 제약성을 지니고 있다. 그러나, 경관선호의 정도에 관한 평가보다는 경관의 본질을 구성하는 모든 요소를 고려한 평가가 경관선호평가에 대한 종합성을 반영할 수 있다. 경관평가의 모호성에도 불구하고 경관의 본질은 우연성에 의존한다고 본다면 우연적 경관평가방법은 크게 무리가 없다. 결국 경관은 생명성을 지니고 있기 때문에 현상으로만 볼 것이 아니라 동시적이면서 산재적 이며 상황적 다양성으로 간주해야 하며 고러란 관점을 강조한 것이 우연적 경관선호 및 경관평가에 대한 접근이라 할 수 있다.도 나타났다. 직업간의 유의성은 학생과 타 직업간에 나타났다. 직업간의 유의성은 학생과 타 직업간에 현격하게 나타났으나, 개인차를 나타내는 속성적 변수는 상호보완적인 변수기능을 수행하고 있기 때문에 다양한 행동의 설명력있는 이유로 볼 수 없다.때로는 민담에서도 풍수가 주제가 되는 경우가 있고, 일반적으로는 역사적 사실이나 인물을 통하여 취락민이지녀온 자연요소에 대한 인식관 또는 그러한 생활에서 나타나는 윤리관 등이 암암리에 표현되기도 한다. 민담을 통하여 우리는 주민들 의식 속에 남아있는 취락의 중요한 요소나 장소들을 찾아볼수 있고 더불어 이들을 중심으로 이루어 졌을지도 모를 생활모습들을 생각해볼 수 있다. 이러한 것들은 $\ulcorner$순응$\lrcorner$의 다른 일면 또는 때에 따라서는 극히 의도적인 $\ulcorner$표현$\lrcorner$적인 한 면모 - 그 대표적인 경우로 정원을 구성하는데 개재된 인간의 의미는 무언가를 표현 또는 표출하고자 함에 있다는 점 -라 볼수도 있을, 예로써 성리학적 사고관념으로써 집과 정사 그리고 주변 경관을 자신의 내적본직 또는 윤리적 영역으로 삼아 묘사.표현.구체화 시켜가기도 한다. 최소한 동족부락의 한두 예들에서 그러한 $\ulcorner$표현$\lrcorner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로 더욱이 공간상에서는 뚜렷하게

• Radiation Oncology Journal
• /
• v.12 no.2
• /
• pp.243-252
• /
• 1994

The use of high dose rate remote afterloading system for the treatment of intraluminal lesions necessitates the need for a more accurate of dose distributions around the high intensity brachytherapy sources, doses are often prescribed to a distance of few centimeters from the linear source, and in this range the dose distribution is very difficult to assess. Accurated and optimized dose calculation with stable numerical algorithms by PC level computer was required to treatment intraluminal lesions by high dose rate brachytherapy system. The exposure rate from sources was calculated with Sievert integral and dose rate in tissue was calculated with Meisberger equation, An algorithm for generating a treatment plan with optimized dose distribution was developed for high dose rate intraluminal radiotherapy. The treatment volume becomes the locus of the constrained target surface points that is the specified radial distance from the source dwelling positions. The treatment target volume may be alternately outlined on an x-ray film of the implant dummy sources. The routine used a linear programming formulism to compute which dwell time at each position to irradiate the constrained dose rate at the target surface points while minimizing the total volume integrated dose to the patient. The exposure rate and the dose distribution to be confirmed the result of calculation with algorithm were measured with film dosimetry, TLD and small size ion chambers.