• Journal of the Korean Wood Science and Technology
• /
• v.34 no.1
• /
• pp.40-51
• /
• 2006

The objective of this research is to analyze a possibility for the utilization of carbonized bark and develop the technique for carbonization of bark for using as the adsorbent, the soil improvement agent, the carrier for microbial activity, health products, and so on. The properties of bark charcoals such as methylenehlue adsorption (MBA), equilibrium moisture content (EMC), far infra rad emissivity, pH, water retention and caloric value were analyzed. The MBA values of bark charcoals carbonized for 8 hr of carbonization time at $800^{\circ}C$ of carbonization temperature for Larix leptolepis, Pinus koraiensis, Pinus rigida were greater than 110 mg/g. The bark charcoals pH values of all three species that were carbonized for 4 hr of carbonization time at $400^{\circ}C$ of carbonization temperature was 6.6 and carbonized for 4 hr at 600 and $800^{\circ}C$ was about 9. Therefore the bark charcoals of those species could be used as charcoals if the carbonization temperature and time were controlled.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.4
• /
• pp.29-37
• /
• 2007

To evaluate the effect of carbonization temperature of charcoal on the heavy metal adsorption property, Quercus mongolica wood and Larix kaempferi bark powder (100~60 mesh) were carbonized at between 400 and $900^{\circ}C$ at intervals of $100^{\circ}C$. In the properties of carbonized materials which affect the adsorption ability, pH increased with increasing the carbonization temperature, so that the pHs of wood and bark charcoal carbonized at $900^{\circ}C$ were 10.8 and 10.4, respectively. Also, in both materials, the carbon content ratio became larger as the carbonization temperature was raised. At the same carbonization temperature, carbon content ratio of the bark charcoal tended to be greater than that of the wood charcoal. In case of iodine adsorption which indicates the adsorption property in liquid phase, the wood charcoal showed higher adsorption value than the bark charcoal. From the investigation of adsorptive elimination properties of the charcoals against 15 ppm Cd, Zn, and Cu, the higher the carbonization temperature, the greater elimination ratio was. In comparison, the wood charcoal presented higher elimination ratio than that of the bark charcoal. In the wood charcoals carbonized at higher than $500^{\circ}C$, especially, 0.2 g of the charcoal was enough to eliminated almost 100% of the heavy metal ions. Heavy metal ion elimination ratio of the charcoals depended on the kinds of adsorbates. The effectiveness of adsorbates in adsorptive elimination by the charcoals were in order of Cu > Cd > Zn. This is because the physicochemical interaction between the adsorbate and adsorbent affects their adsorption properties, it is considered that subsequent researches are needed to improve the effectiveness of heavy metal adsorption by the charcoals.

• Journal of Korea Foresty Energy
• /
• v.21 no.2
• /
• pp.1-9
• /
• 2002

Pine bark was carbonized by using a small-scale experimental kiln and three different types of large-scale kilns (simple (400-$500^{\circ}C$), improved (600-$700^{\circ}C$) and special kiln (800-$1,000^{\circ}C$). The physical properties and pore structures of the bark charcoals prepared were analyzed. When the bark was carbonized at various temperatures ranging from 500 to $900^{\circ}C$in the presence of nitrogen, carbonization yield decreased rapidly with increasing carbonization temperature and it remained constant from 700 to $900^{\circ}C$. The carbonization yield of the bark was 16 - 18% higher than that of pine wood. The BET specific surface areas and iodine values increased with a decrease in carbonization yield. The BET specific surface areas of the bark charcoals reached about 400 -$500m^2／g$ for carbonization yield of 32-40%. The pine wood charcoal prepared at $600^{\circ}C$ for 30 min resulted in a more microporous structure, whereas the bark charcoal prepared at the same condition was more mesoporous. The carbonization yields and physical properties such as iodine values and BET specific surface areas of bark charcoals prepared by using the large-scale kilns were very similar to those of the small-scale kiln. The results indicated that the pine bark could be used as starting material to produce good quality charcoal having a large specific surface area and a high carbonization yield.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.46-52
• /
• 1999

Alkaline sulfite-anthraquinone(AQ) cooking was examined for their effectiveness in delignification of pine (Pinus densiflora S. et Z.) bark. Better delignification was achieved with alkaline sulfite liquor compared to monosulfite liquor, but the degree of delignification was less than 90% indicating need for improvement in cooking method, Remarkable increase in the rate of cooking and delignification was obtained by the simple addition of AQ to the alkaline sulfite cooking, Selectivity of delignification was also improved by the addition of AQ, Consequently, 90% of delignification was achieved with the addition of 0.2% AQ to the alkaline sulfite cooking. The selectivity of delignification was slightly affected by cooking temperature and NaOH concentration during alkaline sulfite-AQ cooking of the bark. The selectivity of delignification was highly affected by the concentration of $Na_2SO_3$, and the optimum concentration of $Na_2SO_3$ for the high delignification was 30% as $Na_2O$.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.53-60
• /
• 2007

Carbon content, properties of micro-pore, and chemical properties of the charcoal prepared from wood powder, wood fiber, and bark of Abies sibirica Ledeb at different temperatures were investigated. The yield of charcoal decreased with increasing the carbonization temperature. The yield of bark charcoal was higher than those of wood and wood fiber charcoal. The content ratio of carbon atom in the charcoal increased with increasing the carbonization temperature, whereas those of hydrogen and oxygen atom were decreased. Ash content of bark charcoal was also higher than those of wood and wood fiber charcoal. The specific surface area of wood and wood fiber charcoal was greater than that of bark charcoal. In all charcoal, the specific surface area and the volume of micro-pore were highest when the carbonization temperature was $600^{\circ}C$, however they tended to decrease when the temperature was reached to $800^{\circ}C$. For the functionality test of chemical groups on the charcoal surface, adsorption test have performed against acidic (HCl) and basic chemicals (NaOH, $Na_2CO_3$, and $NaHCO_3$). As carbonization temperature increased, adsorption amount of HCl increased, while adsorption amounts of NaOH, $Na_2CO_3$, and $NaHCO_3$ were decreased. The charcoal prepared at higher temperature showed basic properties, while the charcoals manufactured at lower temperature presented acidic properties. Therefore, it was considered that the carbonization temperature affected the pH of charcoal.

• Journal of Korea Foresty Energy
• /
• v.21 no.3
• /
• pp.1-9
• /
• 2002

Various types of acids, such as mineral acids, organic acids, and organic sulfonic acids, were used as catalysts in order to investigate their effectiveness during phenol liquefaction of pine bark. Hydrochloric arid was the most effective acid catalyst of the mineral acids used in this experiment for the phenol liquefaction, but the amount of the acid needed for more than 90% liquefaction was at least 11 mmol. Among the carboxylic acids used triflouroacetic acid (TFA) was effective for the liquefaction, but it was not possible to obtain liquefaction of more than 80%. Organic sulfonic acids, p-toluenesulfonic acid (PTSA) and methanesulfonic acid (MSA), showed remarkable effects for liquefaction, even in small amounts and at low liquefaction temperatures. Especially in the case of PTSA, a 92% liquefaction yield was obtained at the liquefaction condition of 14$0^{\circ}C$ for 2 h. Therefore, it was evident that the PTSA is a good acid catalyst for the phenol-pine bark liquefaction system.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.303-307
• /
• 2008

In this study, we have carried out the cone calorimeter test to examine the thermal characteristics, such as total smoke production(TSP), smoke temperature and oxygen consumption, of significant parts of above trees which are representative species of Young Dong Province of Korea. The smoke production of dead leaves and living leaves of pinus densiflora was increased rapidly at the early period of combustion. So the total smoke production of this parts was 8.3 times higher than other parts. The TSP of branches and barks of quercus dentata was 14.4 and 7.2 times higher than of pinus densiflora respectively. And also the maximum smoke temperature was about $338.35{\sim}353.25\;K$. The significant difference of oxygen consumption was not detected for dead leaves, branches and barks. However, the oxygen consumption of living leaves which have high percentage of moisture content is the lowest.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.69-76
• /
• 2008

To estimate removal ability of harmful gas by charcoal, we carbonized Red oak (Quercus mongolica Fischer) wood and Larch (Larix leptoepis) bark at $300^{\circ}C$, $600^{\circ}C$ and $900^{\circ}C$ for 1 hour. Gas removal ratios was increased with carbonization temperature but there is no difference between wood and bark charcoal. In the case of bad smell and VOC gas, woody charcoal including bark charcoal carbonized at $300^{\circ}C$ showed low removal ratio, less than 50%, whereas woody charcoals which was carbonized at more than $600^{\circ}C$ reached almost 100% removal ratio to bad smell gas such as trimethylamine, methymercaptan, hydrogen sulfide, and to VOC such as benzene, toluene, xylene in $5{\ell}$ tedler bag with each gas of 100 ppm. It was thought that because charcoals carbonized at high temperature, for example, $600^{\circ}C$ or $900^{\circ}C$ have enough specific surface area to adsorb gas of 100 ppm. Moreover these charcoals rapidly removed almost gas in 10 minutes. However, acetylene, $SO_2$ and $NO_2$, charcoals which was carbonized more than $600^{\circ}C$ and which showed high removal ratio had low gas removal ratio of 40% at even 4 hours adsorption. It was concluded that adsorptive ability of woody charcoal was mainly influenced with carbonizing temperature, so that different charcoals carbonized at different temperature brings different gas removal ratio because these charcoals have not only different physical factor such as specific surface area but different chemical characteristic such as functional group, expected.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.45-52
• /
• 2005

This research was performed to evaluate adsorption behavior of woody charcoals obtained from wood powder, fiber and bark of spruce (Abies sibirica Ledeb). The wood materials were carbonized at various temperatures for 1 hour using experimental rotary kiln without any inert gas. The adsorption capacity of iodine and toluene, specific surface area and removal efficiency of acetic acid and ammonia gas of those charcoals were measured. The higher was the temperature for carbonization, the lower yields of charcoals were. Ash content of bark charcoal was higher than that of wood powder charcoal or fiber charcoal. Elemental analysis of woody charcoal revealed that the content of carbon was gradually lincreased as carbonization temperature was higher. When carbonization temperature was higher, adsorption capacity of woody charcoals for iodine was much improved. Wood powder charcoal and fiber charcoal were more effective for iodine adsorption rather than bark charcoal. Capacity of toluene adsorption was the highest in the charcoal of $600^{\circ}C$. Charcoals produced at high temperature efficiently removed acetic acid gas, while charcoals carbonized at low temperature such as $400^{\circ}C$ were proper to remove ammonia gas. This difference may be explained that the acidity of charcoals depends on the carbonization temperature: charcoals of low temperature indicate acidic property, while those of high temperature turned to alkaline.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.49-56
• /
• 2000

This study was designed to investigate the adsorption of heavy metal ions by untreated bark according to the treatment conditions of aqueous solution. The effect of temperature and pH of aqueous solution, particle size of bark, addition of light metal ions on the adsorption was examined, and the competition in adsorption among heavy metal ions was also evaluated. te The adsorption ratio of $Cu^{2+}$ and $Zn^{2+}$ increased with increasing themperature of solution from $-5^{\circ}C$ to $10^{\circ}C$ however, it was relatively constant at temperatures between $10^{\circ}C$ and $55^{\circ}C$. The adsorption ratio of $Cr^{6+}$ increased continuously with increasing the temperature of solution. The maximum adsorption ratio of $Cu^{2+}$, $Zn^{2+}$, and $Pb^{2+}$ was noted at pHs ranged 6 to 7; however, the adsorption ratio declined sharply on either sides of the optimum. The adsorption ratio of $Cr^{6+}$ decreased continuously with increasing the pH of solution. The adsorption ratio increased as decreasing the particle size of bark, and there was little differences in adsorption tendency between pine and oak bark. By the addition of $Ca^{2+}$ or $Mg^{2+}$(10~25 ppm), the adsorption ratio of $Cu^{2+}$ and $Zn^{2+}$ increased. An increase of the adsorption ratio was higher in oak bark than in pine bark. However, the adsorption ratio of $Pb^{2+}$ and $Cr^{6+}$ was not affected by the addition of light metal ions. As the mixed solution of 2 or 3 kinds of heavy metal ions($Cu^{2+}$, $Zn^{2+}$, $Pb^{2+}$) was treated with the untreated bark, the adsorption of $Zn^{2+}$ decreased considerably because of the competitive adsorption among heavy metal ions. Also the adsorption of $Cu^{2+}$ was more and less reduced. However the adsorption of $Pb^{2+}$ was not affected by the presence of other heavy metal ions.