무정형 SiC 박막을 수평형 CVD반응기로부터 SiH$_{4}$ 및 H$_{2}$를 반응기체로 하여 실리콘 웨이퍼위에 증착시켜 제조하였다. 박막 성장 속도는 상압에서 650.deg.C와 850.deg.C범위에서 측정되었다. 반응기체의 유량은 1000sccm으로 고정하였으며 SiH$_{4}$와 CH$_{4}$의 유량을 변화시켰다. 증착 반응속도식으로 표면 반응이 율속단계인 Eley-Rideal 모델과 SiH$_{4}$와 CH$_{4}$의 종도에 m차로 비례하는 두가지 속도식을 가정하였다. 증착시간에 따른 SiC 박막두께의 측정으로부터 얻은 증착 반응 속도로부터 회귀 분석법에 의하여 두가지 반응속도식의 반응속도 상수를 구하였다. 얻어진 반응속도식에 의해서 계산된 값과 실험치를 비교한 결과 0.15차의 반응속도식이 Eley-Rideal반응기구보다 약산 더 잘 맞음을 알 수 있으나 두 모델 다 약간씩 실험결과와 차이가 나고 있다. 이것은 본 실험의 증착 조건의 율속단계가 확산 단계와 표면 반응 단계의 전이영역 즉 본 실험의 증착조건에서 확산속도와 표면 반응속도가 비슷하기 때문으로 생각된다. 또한 Eley-Rideal 반응기구에서 부터 얻어진 SiH$_{4}$ 및 CH$_{4}$의 흡착평형상수 $K_{s}$ 와 $K_{c}$ 값을 비교하면 1000K이하에서는 $K_{s}$ 가 $K_{c}$ 보다 큰 값을 가지는데 이것은 Gibbs 자유에너지 최소화 방법에서 구한 결과와 일치하였다.
The purpose of this study was to investigate the effects of occlusal condition and clenching level on the mandibular torque rotational movement. For this study, healthy 14 men without any symptoms and signs of temporomandibular disorders were selected. Mandibular torque rotational movement was observed in each circumstance of combination of three occlusal conditions such as natural dentition, with wafer of 3.6 mm thickness, and wafer with resin stop of 14 mm thickness total during hard biting of bite stick at maximum voluntary contraction(MVC) and 50% of MVC level of surface EMG activity of masseter muscle. Electromyographic activity and mandibular torque rotational movement were observed using BioEMG and BioEGN in $BioPak^{(R)}$ system. Each biting movement in each circumstance was composed of clenching one time and hard biting of wooden stick two times. The observed items were opening distance, velocity and amount of torque rotational movement in mandibular movement, and the data were statistically processed with $SPSS^{(R)}$ windows (ver.10.0). The results of this study were as follows: 1. There were no differences in the mandibular movement distance between those value in both biting sides, and between those in both clenching forces, but the mandibular velocity showed a different results by clenching force. For the amount of torque rotational movement, there were no difference in the value of the frontal plane but some significant difference was in the value of the horizontal plane by biting side. 2. The mandibular movement distance and the mandibular velocity in both planes were higher by maximum voluntary contraction than those by half maximum voluntary contraction, and amount of torque rotational movement in the horizontal plane was also increased by maximum voluntary contraction. 3. The opening distance in both planes were decreased with the increase of vertical dimension of occlusion, namely, by the occlusal appliances, and this pattern was also showed in the mandibular velocity in case of hard biting by maximum voluntary contraction. However, the amount of torque rotational movement were not different by the increase of vertical dimension of occlusion. 4. The value of angle and distance of the torque rotational movement in the hard biting of wooden stick were generally higher than those in the clenching without wooden stick in both planes without regard to occlusal conditions and/or clenching forces.
Proceedings of the Korean Vacuum Society Conference
/
2010.08a
/
pp.115-115
/
2010
고휘도 고효율 백색 LED (lighting emitting diode)가 차세대 조명광원으로 급부상하고 있다. 백색 LED를 생산하기 위한 공정에서 MOCVD (유기금속화학증착)장비를 이용한 에피웨이퍼공정은 에피층과 기판의 격자상수 차이와 열팽창계수차이로 인하여 생성되는 에피결함의 문제로 기판과 GaN 박막층 사이에 완충작용을 해줄 수 있는 버퍼층 (Buffer layer)을 만든다. 그 위에 InGaN/GaN MQW (Multi Quantum Well)공정을 하여 고휘도 고효율 백색 LED를 구현 할 수 있다. 이 공정에서 기판의 온도가 불균일해지면 wafer 파장 균일도가 나빠지므로 백색 LED의 yield가 떨어진다. 균일한 기판 온도를 갖기 위한 조건으로 기판과 induction heater의 간격, 가스의 흐름, 기판의 회전, 유도가열코일의 디자인 등이 장비의 설계 요소이다. 본 연구에서는 유도가열방식의 유도가열히터를 이용하여 기판과 히터의 간격에 차이에 따른 기판 균일도 측정했고, 회전에 의한 기판의 온도분포와 자기장분포의 실험적 결과를 상용화 유체역학 코드인 CFD-ACE+의 모델링 결과와 비교 했다. 또한 가스의 inlet위치에 따른 기판의 온도 균일도를 측정하였다. 본 연구에서 사용된 가열원은 유도가열히터 (Viewtong, VT-180C2)를 사용했고, 가열된 흑연판 표면의 온도를 2차원적으로 평가하기 위하여 적외선 열화상 카메라 (Fluke, Ti-10)를 이용하여 온도를 측정했다. 와전류에 의한 흑연판의 가열 현상을 누출 전계의 분포로 확인하기 위하여 Tektronix사의 A6302 probe와 TM502A amplifier를 사용했다. 흑연판 위에 1 cm2 간격으로 211곳에서 유도 전류를 측정했다. 유도전류는 벡터양이므로 $E{\theta}$를 측정했으며, 이때의 측정 방향은 흑연판의 원주방향이다. 또한 자기장에 의한 유도전류의 분포를 확인하기 위하여 KANETEC사의 TM-501을 이용하여 흑연판 중심으로부터 10 mm 간격으로 자기장을 측정 했다. 저항 가열 히터를 통하여 대류에 의한 온도 균일도를 평가한 결과 gap이 3 mm일때, 평균 온도 $166.5^{\circ}C$에서 불균일도 6.5%를 얻었으며, 회전에 의한 온도 균일도 측정 결과는 2.5 RPM일 때 평균온도 $163^{\circ}C$에서 5.5%의 불균일도를 확인했다. 또한 CFD-ACE+를 이용한 모델링 결과 자기장의 분포는 중심이 높은 분포를 나타냄을 확인했고, 기판의 온도분포는 중심으로부터 55 mm되는 곳에서 300 W/m3로 가장 높은 분포를 나타냈다. 가스 inlet 위치를 흑연판 중심으로 수직, 수평 방향으로 흘려주었을 때의 불균일도는 각각 10.5%, 8.0%로 수평 방향으로 가스를 흘려주었을 때 2.5% 온도 균일도 향상을 확인했다.
Proceedings of the Korean Vacuum Society Conference
/
2016.02a
/
pp.212-212
/
2016
2차원 탄소나노재료인 그래핀은 우수한 물성으로 인하여 광범위한 분야로 응용이 가능할 것으로 예상되어 많은 주목을 받아왔다. 이러한 그래핀의 응용가능성을 실현시키기 위해서는 보다 손쉽고 신뢰할 수 있는 합성방법의 개발이 필요한 실정이다. 그래핀의 합성 방법들로 흑연을 물리적 및 화학적으로 박리하거나, 특정 결정표면 위에 방향성 성장의 흑연화를 통한 합성, 그리고 열화학기상증착법(Thermal chemical vapor deposition; T-CVD) 등의 합성방법들이 제기되었다. 이중 T-CVD법은 대면적으로 두께의 균일성이 높은 그래핀을 합성하기 위한 가장 적합한 방법으로 알려져 있다. 그러나 일반적으로 T-CVD공정은 원료 가스인 탄화수소가스를 효율적으로 분해하기 위하여 $1000^{\circ}C$부근의 온공정이 요구되며, 이는 산업적인 응용의 측면에서 그래핀의 접근성을 제한한다. 따라서 대면적으로 고품질의 그래핀을 저온합성 할 수 있는 공정의 개발은 필수적이다. 본 연구에서는, 플라즈마를 이용하여 원료가스를 효율적으로 분해함으로써 그래핀의 저온합성을 도모하였다. 퀄츠 튜브로 구성된 수평형 합성장치는 플라즈마 방전영역과 T-CVD 영역으로 구분되며, 방전되는 유도결합 플라즈마는 원료가스를 효율적으로 분해하는 역할을 한다. 합성을 위한 기판과 원료가스로는 각각 전자빔 증착법을 통하여 300nm 두께의 니켈 박막이 증착된 실리콘 웨이퍼와 메탄가스를 이용하였다. 저온합성공정의 변수로는 인가전력과 합성시간으로 설정하였으며, 공정변수의 영향을 확인함으로써 그래핀의 저온합성 메커니즘을 고찰하였다. 연구결과, 인가전력이 증가되고 합성시간이 길어짐에 따라 원료가스의 분해효율과 공급되는 탄소원자의 반응시간이 보장되어 그래핀의 합성온도가 저하가능함을 확인하였으며, $400^{\circ}C$에서 다층 그래핀이 합성됨을 확인하였다. 또한 플라즈마 변수의 보다 정밀한 제어를 통해 합성온도의 저온화와 그래핀의 결정성 향상이 가능할 것으로 예상된다.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.6
no.3
/
pp.360-367
/
1996
The OISF (Oxidation Induced Stacking Fault)is expected to affect the electrical properties in Si single crystals, and the nuclei of OISF are believed to be formed during the crystal growing process. Initial oxygen concentration, dopant type and its density, and cooling rate are regareded as major factors on OISF formation. In this study, the variations of OISF density under various cooling rate were investigated. Si single crystal was heated to $1400^{\circ}C$ in Ar ambient and cooled down to room temperature at different cooling rate, using horizontal tube furnace. After that, they were oxidized at $1150^{\circ}C$, and then, OISF was observed with optical microscope. The relation between oxide procipitates and OISF nucleation was investigated by FTIR analysis. As a result, it was found that there exists the intermediate cooling rate range in which OISF nucleation is highly enhanced. And also, it was found that OISF nucleation is closely related with silicon oxide procipitation in Si single crystals.
Journal of the Microelectronics and Packaging Society
/
v.8
no.4
/
pp.17-23
/
2001
The 3-D Hall sensor has two horizontal magnetic field sensing parts ($\chi$, y components) and one vertical magnetic field sensing part (z component). For conventional, 3-D Hall sensor it is general that the sensitivity for $B_{z}$ is about 1/10 compared with those for $B_\chi$ or $B_y$. Therefore, in this work, we proposed 3-D Hall sensor with new structure. We have increased the sensitivity about 6 times to form the trench using anisotropic etching. And we have increased the sensitivity for the $B_z$ by 80% compared with those of $B_\chi$ and$B_y$ using deposition of the ferromagnetic thin films on the bottom surface of the wafer to concentrate the magnetic fluxes. When the input current was 3 mA, sensitivities of the fabricated sensor with Ni/Fe film for $B_\chi, B_y$ and $B_{z}$ were measured as 120.1 mV/T, 111.7 mV/T, 95.3 mV/T, respectively. The measured linearity of the sensor was within $\pm$3% of error.
An, Chi-Seong;Kulkarni, Atul;Kim, Ho-Jung;Kim, Tae-Seong
Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.346-346
/
2011
실리콘 나노와이어는 높은 표면적으로 인해 뛰어난 감지 능력을 가지는 재료 중 하나로 다양한 센서 응용 분야에 사용되고 있다. 이를 제작하는 방법에는 Micro Electro Mechanical Systems (MEMS) 공정을 이용한 Top-down 방식과 Vapor-Liquid-Solid (VLS) 공정을 이용한 Bottom-up 방식이 널리 사용되고 있다. 특히 Plasma-Enhanced Chemical Vapor Deposition(PECVD)와 Au 촉매를 이용한 Bottom-up 방식은 수십 나노미터 이하의 실리콘 나노와이어를 간단한 변수 조절을 통해 성장시킬 수 있다. 또한 Au/Si의 공융점인 363$^{\circ}C$보다 낮은 온도에서 $SiH_4$를 분해시킬 수 있어 열적 효과로 인한 손실을 줄일 수 있는 장점을 지니고 있다. 하지만 PECVD를 이용한 실리콘 나노와이어 성장은 VLS 공정을 통해 표면으로부터 수직으로 성장하게 되는데 이는 센서 응용을 위한 전극 사이의 수평 연결 어려움을 지니고 있다. 따라서 이를 피하기 위한 표면 성장된 실리콘 나노와이어가 요구된다. 본 연구에서는 PECVD VLS 공정을 이용하여 $HAuCl_4$를 촉매로 이용한 표면 성장된 Tree-like 실리콘 나노와이어를 성장시켰다. 공정가스로는 $SiH_4$와 이를 분해시키기 위해 Ar 플라즈마를 사용 하였고 웨이퍼 표면에 HAuCl4를 분사하고 고진공 상태에서 챔버 기판을 370$^{\circ}C$까지 가열한 후 플라즈마 파워(W) 및 공정 압력(mTorr)을 변수로 두어 실험을 진행하였다. 기존의 보고된 연구와 달리 환원된 금 입자 대신 $HAuCl_4$용액을 그대로 사용하였는데 이는 표면 조도(Surface roughness)를 가지는 Au 박막 상태로 존재하게 된다. 이 중 마루(Asperite) 부분에 PECVD로부터 발생된 실리콘 나노 입자가 상대적으로 높은 확률로 흡착하게 되어 실리콘 나노와이어의 표면성장을 유도하게 된다. 성장된 실리콘 나노와이어는 SEM과 EDS를 이용하여 직경, 길이 및 화학적 성분을 측정하였다. 직경은 약 100 nm, 길이는 약 10 ${\mu}m$ 정도로 나타났으며 Tree-like 실리콘 나노와이어가 성장되었다. 향후 전극이 형성된 기판위에 이를 직접 성장시킴으로써 이 물질의 I-V 특성을 파악 할 것이며 이는 센서 응용 분야에 도움이 될 것으로 기대된다.
Two polymeric interfaces with single component homo-polymers were prepared to control the orientation of block copolymer thin-film nanostructures. Poly(4-acetoxy styrene) (OH-PAS) and poly(4-methoxy styrene) (OH-PMS) which have the average chemical composition of polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) were precisely synthesized through nitroxide-mediated radical polymerization. After dehydration reactions between above polymers and SiOx layers of silicon wafers, the polymer-modified interface induced partial (30%) vertical orientation of PS-b-PMMA thin film in the case of OH-PMS and wholly parallel orientation in the case of OH-PAS. Chemical compositions of polymeric interface layers are regarded as the key parameter to control the orientation of nanostructures of block copolymer thin film.
Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.75-75
/
2010
단일벽 탄소나노튜브(SWNT)는 뛰어난 물리적 성질과 화학적 안정성을 가지고 있어서 다양한 분야의 응용이 기대되어 폭넓은 연구가 진행 되고 있다. 특히 SWNT의 전기적 및 기계적 특성들은 SWNT의 직경 및 뒤틀림도(chirality)에 의해 크게 좌우되기 때문에, 합성하는 단계에서 직경 또는 chirality를 제어에 관한 많은 이론적 연구가 진행되어 왔으며, 최근에는 초기 SWNT의 핵생성 단계에서의 촉매의 거동 및 상호 연관성 등에 관한 실험적인 연구결과들이 속속 보고되고 있는 실정이다. 하지만, 아직도 이에 관한 더욱 다양하고 활발한 연구 접근 및 결과들이 필요한 시점이다. 상기 배경을 바탕으로 본 연구에서는 균일한 직경을 갖는 SWNT의 합성을 위한 기초연구로서 SWNT의 직경과 촉매나노입자의 크기의 상호 연관성에 대해 체계적으로 조사하였다. 우선 SWNT합성을 위한 촉매나노입자를 얻기 위해 페리틴(ferritin)용액의 농도 및 스핀코팅 조건을 변화시킴으로써 기판 위에 분산농도를 제어한 후, 대기 열처리를 통하여 촉매나노입자의 농도를 제어하였다. 나노입자의 평균직경은 4 nm 정도로 비교적 균일하였으며, 고농도의 촉매입자는 SWNT의 다발화(bundling)를 유발하였다. 따라서, SWNT와 나노입자 직경의 상호연관성을 조사하기 위해서는 단분산(monodispersed) 된 나노입자를 이용하였으며, 아르곤 분위기에서 추가적으로 고온($900^{\circ}C$) 열처리를 실시함으로써 나노입자의 크기감소를 도모하였다. 실험결과, 열처리 시간의 증가에 따라 입자크기가 감소함을 확인하였으며, 이는 나노입자의 증발에 의한 것으로 예상된다. 다음으로는 열처리를 통하여 직경이 제어된 나노입자를 이용하여 SWNT를 합성한 후 SWNT와 촉매크기 사이의 크기 관계를 조사하였다. SWNT의 합성은 메탄을 원료가스로 열화학증기증착법을 이용하였고, 합성기판으로는 산화실리콘웨이퍼와 퀄츠기판을 이용하였다. 성장한 SWNT의 직경은 AFM을 이용하여 측정하였으며, 퀄츠기판에 수평배향 성장시킨 SWNT를 3차원 구조의 기판으로 전사(transfer)하여, 라만분석이 용이하도록 하였다.
Journal of the Korea Academia-Industrial cooperation Society
/
v.11
no.11
/
pp.4121-4128
/
2010
A probe card is used in testing semiconductor wafers. It must maintain a precise location tolerance for a fine pitch due to highly densified chips. However, high heat transferred from its lower chuck causes thermal deformations of the probe card. Vertical deformation due to the heat will bring contact problems to the pins in the probe card, while horizontal deformation will cause positional inaccuracies. Therefore, probe cards must be designed with proper materials and structures so that the thermal deformations are within allowable tolerances. In this paper, heat transfer analyses under realistic loading conditions are simulated using ANSYS$^{TM}$ finite element analysis program. Thermal deformations are calculated based on steady-state temperature gradients, and an optimal structure of the probe card is proposed by adjusting a set of relevant design parameters so that the deformations are minimized.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.