• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.51-60
• /
• 2010

In 2008, the Development Impact Fee Zoning has been newly amended and added to the existing National Territory Planning Act. Since the beginning of 2009, many local governments nationwide started to adopt the law as a powerful tool to prepare the prescirbed masterplans for the installment of adequate infrastructure and to procure the financial resources to realize the plan. The study, in this context, tried to build gridded population data and analyzed the population cells that exceed the legal criteria of population increase rate required by the law over the case area of Sooyoung-Ri in Hwasung City. The study further probed to group the selected population cells in five specified increasing steps on which the alternative impact fee zones are built. Throughout the process, the study could properly set a reasonable impact fee zone and suggested a practical examples of the final zone specification applicable by the localities.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.66-76
• /
• 2016

Determination of type of a vehicle is being used in various areas such as collecting tolls, collecting statistical traffic data and traffic prognosis. Because most of the vehicle type classification systems depend on vehicle length indirectly or directly, highly reliable automatic vehicle length measurement system is crucial for them. This study makes use of a pencil beam laser rangemeter and devises a mechanical device which rotates the laser rangemeter. The implemented system measures the range between a point and the laser rangemeter then indicates it as a spherical coordinate. We obtain several silhouettes of cross section of the vehicle, the rate of change of the silhouettes, signs of the rates then squares the rates to apply cell averaging constant false alarm rate (CA-CFAR) technique to find out where the border is between the vehicle and the background. Using the border and trigonometry, we calculated the length of the vehicle and confirmed that the calculated vehicle length is about 94% of actual length.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.825-838
• /
• 1998

The purpose of this study was to evaluate the differences of soft tissue profile changes between the growing patients and the adult who had passed the growth peak, in orthodontic treatment with four premolar extractions. The results which was taken by correlating the soft tissue changes with hard tissue changes, lip thickness, molar relationship and arch length discrepancy in both groups was like the followings. 1. Significant hard tissue changes were decrease of VIs, VIi, UlPP, LlMP, HIi and increase of HPog'in adults and decrease of VIs, VIi and increase of VA, VPog'and all the vertical measurements in adolescents. 2. Significant soft tissue changes were decrease of VLs, VLi, and VILS in adults and increase of VSn, VSLS, VLs, VPog' and almost all vertical measurements in adolescents, and ${\Delta}LsE,\;{\Denta}LiE$ in adults and ${\Delta}LsE,\;{\Denta}LiE,\;{\Delta}LiSP\;and\;{\Delta}Mang$ was also significant 3. Correlation coefficient between ${\Delta}VIs\;and\;{\Delta}VLs$ was the greatest in adults and the next was ${\Delta}Ii/{\Delta}Li,\;{\Delta}Ii/{\Delta}ILS,\;{\Delta}ID/{\Delta}Li\;and\;{\Delta}ID/{\Delta}ILS$. In contrast all the vertical and horizontal measurements of hard and soft tissue in adolescents showed statistically significant corerrlation. 4. There were differences in correlation between soft tissue changes and incisor inclination and retraction at both groups, but the lower lip, nasolabial angle and mentolabial angle were commonly less influenced by the hard tissue changes in both groups. 5. The thinner the upper lip was, the more the ${\Delta}LsSP$ was in both groups, and the thinner the lower lip was, the more the ${\Delta}LiE\;and\;{\Denta}LiSP$ was in adolescents. 6. Molar relationship didn't influence the soft tissue profile changes. 7. Arch length discrepancy didn't influence the soft tissue profile changes.

• Journal of Venture Innovation
• /
• v.7 no.1
• /
• pp.167-182
• /
• 2024

The aim of this study is to empirically explore the operational spillover effect among companies within chaebol groups, prominent corporate conglomerates in South Korea. Chaebols are known for their horizontal and vertical integration, fostering close collaboration among their constituent companies from a supply chain standpoint. Existing literature highlights the sharing of tangible and intangible resources within chaebol structures, leading to increased efficiency by minimizing transaction costs through resource sharing. This research investigates whether operational management performance within chaebol structures can be transmitted through cooperative resource utilization. To achieve this objective, we categorize leading companies and affiliate companies within chaebols and examine whether the operational management performance of leading companies significantly influences that of affiliate companies. Data on conglomerates, as defined by the Korea Fair Trade Commission, were collected, along with information on companies within these groups. Subsequently, the company with the highest revenue within each group was identified as the leading company, while the remaining companies were designated as affiliate companies. Our analysis reveals a significant positive relationship between the performance of inventory and facility resource management of leading companies and that of affiliate companies. This study sheds light on the transfer of operational management performance within conglomerates from a managerial perspective, underscoring the importance of reinforcing cooperation systems within the chaebol group. Furthermore, this research contributes to the academic discourse by delineating conglomerates from an operational management perspective and empirically demonstrating the transfer effect of operational management performance.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.4
• /
• pp.442-452
• /
• 2022

The purpose of this study was to compare the mesio-distal and vertical position of impacted maxillary canines on panoramic radiographs with the labio-palatal position of impacted canines and root resorption of adjacent teeth on CBCT (Cone-Beam Computed Tomography). A total of 54 patients with 69 impacted maxillary canines were included in this study. On panoramic radiographs, the mesio-distal (Sector I - V), and vertical position, and angulation of impacted maxillary canines were evaluated. Labio-palatal position and root resorption of adjacent teeth were evaluated on CBCT. Labial impaction of canines was most frequent in panoramic sector I. Impaction within the arch was most frequent in sector I and II. Palatal impaction was most frequent in sector III, IV, and V. Mesially positioned canines on panoramic radiographs tended to be palatally impacted. Most of the root resorption of adjacent teeth occurred in sector III, IV, and V (p < 0.05). Canines with low angulation on panoramic radiographs tended to be palatally impacted and resorb the roots of adjacent teeth. The vertical position of impacted canines on panoramic radiographs was not statistically significant with respect to labio-palatal position and root resorption of adjacent teeth on CBCT. Analysis of the mesio-distal position and angulation of impacted maxillary canines on panoramic radiographs can be used to predict the labio-palatal position of impacted canines and root resorption of adjacent teeth.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.477-482
• /
• 2022

The structure of the turnout track is very complex, so it is a facility that is more difficult to maintain and requires detailed management than a general track type. The purpose of this study is to analyze the effect on the deformation of the turnout system of the ground section due to the excavation work adjacent to the serviced urban railways. In this study, based on finite element analysis for each stage of adjacent excavation, the track deformation for each major location of turnout system was analyzed in consideration of the layout of the turnout system installed on the ground section, and the safety and stability was confirmed by comparing it with the track irregularity regulation. As a result of the study, it was found that the major construction stage affecting the track deformation of the turnout system on the ground section was the final stage of excavation. In addition, although the vertical displacement which is a vertical irregularity occurred relatively large, it was analyzed that the horizontal deformation was dominant overall, because of the excavation site is located on the side of the turnout system. In addition, it was analyzed that the amount of displacement at each major location of the turnout system is different, and there is a possibility that there may be a twist irregularity due to the deviation of the track deformation for each location according to the distance from the excavation site. Therefore, it was analyzed that it is necessary to classify and manage the importance of the track deformation of the turnout system of actual operating line, including additional displacement due to adjacent excavation, based on the track irregularity that has occurred at each location where the major deformation characteristics occur.

• The korean journal of orthodontics
• /
• v.32 no.4 s.93
• /
• pp.275-291
• /
• 2002

Of various factors indicated for effective use of straight wire appliances, there was a great lack of studies both domestic and international about the curvatures of tooth crowns. This study was performed to investigate the labio/buccal clinical crown curvatures of Korean permanent teeth. For this study, three-dimensional laser scanning was performed on 36 dental casts with normal anatomic structures. Andrews plane and Facial axis of clinical crown (FACC) were designated as horizontal and vertical reference planes respectively. 2 or 3 lines, 1mm apart, were drawn superior, inferior, left and right of these reference planes. A three-dimensional coordinate table was made for points formed by crossing these lines, and averages of each coordinate point on the 36 dental casts were obtained. The curvature equation was made using three-dimensional coordinate points (x,y,z) and by this curvature equation, the curve ratio of each tooth was obtained. Curve ratio changes of each section of teeth were calculated by curve ratios of simplified curves. These two dimensional curves were simplified horizontally and vertically Conclusions for this study are as follows. 1. The basic data of labial and buccal clinical crown curvatures were obtained about Korean permanent teeth. 2. No significant difference was found between male and females. 3. Individual tooth characteristics 1) In maxillary central incisors, the difference in the curve ratio between the gingival and incisal sides was greater than for the other teeth. And the gingival side showed a greater curve ratio. 2) Maxillary canines showed more curvatures in the mesio-occlusal surface than the other surfaces. 3) In maxillary $1^{st}$ premolars, more curvatures were found in mesio-occlusal and disto-gingival surface, thus showing a twisted crown surface, but in maxillary $2^{nd}$ premolars, the crown curvatures of mesial and distal ends became parallel to each other. 4) No significant difference in crown curvatures was found between mandibular central and lateral incisors. 5) Occluso-gingival curvatures of mandibular$2^{nd}$ premolar turned out to be more rounded than mandibular $1^{st}$ premolars or maxillary $2^{nd}$ premolars. From the above conclusions, it can be deduced that the same bracket bases can be used for mandibular central and lateral incisors. But for maxillary $1^{st}\;and\;2^{nd}$ premolars and for mandibular $1^{st}\;and\;2^{nd}$ premolars, because crown curvatures showed significant differences, when making bracket bases there is ample reason to make bracket base curves differently for each type of tooth.

• Progress in Medical Physics
• /
• v.2 no.2
• /
• pp.109-120
• /
• 1991

Total body irradiation is operated to irradicate malignant cells of bone marrow of patients to be treated with bone marrow transplantation. Field size of a linear accelerator or cobalt teletherapy unit with normal geometry for routine technique is too small to cover whole body of a patient. So, any special method to cover patient whole body must be developed. Because such environments as room conditions and machine design are not universal, some characteristic method of TBI for each hospital could be developed. At Seoul National University Hospital, at present, only a cobalt unit is available for TBI because source head of the unit could be tilted. When the head is tilted outward by 90$^{\circ}$, beam direction is horizontal and perpendicular to opposite wall. Then, the distance from cobalt source to the wall was 319 cm. Provided that the distance from the wall to midsagittal plane of a patient is 40cm, nominal field size at the plane(SCD 279cm) is 122cm$\times$122cm but field size by measurement of exposure profile was 130cm$\times$129cm and vertical profile was not symmetric. That field size is large enough to cover total body of a patient when he rests on a couch in a squatting posture. Assuming that average lateral width of patients is 30cm, percent depth dose for SSD 264cm and nominal field size 115.5cm$\times$115.5cm was measured with a plane-parallel chamber in a polystyrene phantom and was linear over depth range 10～20cm. An anthropomorphic phantom of size 25cm wide and 30cm deep. Depth of dose maximum, surface dose and depth of 50% dose were 0.3cm, 82% and 16.9cm, respectively. A dose profile on beam axis for two opposing beams was uniform within 10% for mid-depth dose. Tissue phantom ratio with reference depth 15cm for maximum field size at SCD 279cm was measured in a small polystyrene phantom and was linear over depth range 10～20cm. An anthropomorphic phantom with TLD chips inserted in holes on the largest coronal plane was bilaterally irradiated by 15 minute in each direction by cobalt beam aixs in line with the cross line of the coronal plane and contact surface of sections No. 27 and 28. When doses were normalized with dose at mid-depth on beam axis, doses in head/neck, abdomen and lower lung region were close to reference dose within $\pm$ 10% but doses in upper lung, shoulder and pelvis region were lower than 10% from reference dose. Particulaly, doses in shoulder region were lower than 30%. On this result, the conclusion such that under a geometric condition for TBI with cobalt beam as SNUH radiotherapy departement, compensators for head/neck and lung shielding are not required but boost irradiation to shoulder is required could be induced.

• Journal of Sericultural and Entomological Science
• /
• v.3
• /
• pp.1-11
• /
• 1963

This treatise is to set up a fundamental condition of checking silk lousiness and to set up a new improving method of cocoon bave lousiness after super refining treatment. It is also studied whether silk lousiness can be eliminated through the observation of the silk gland, or the lousiness can be able to improve through such a study. The conclusions obtained in this paper are as follows. 1. Silk lousiness is able to be observed most properly when the light direction and the fiber direction are parallel in plan view of the silk cloth and the greater the angle between them is, the less the lousiness is observed. When, however, the angle is greater than some specific angle(30$^{\circ}$), no more lousiness is observed. This specific angle is named by the author as Lousiness Horizontal Critical Angle. 2. Silk lousiness can be observed when the angle of light incidence against the silk cloth is six degrees, while the larger the angle is, the less the lousiness is observed. When, however, the angle is greater than same specific angle(45$^{\circ}$) the lousiness disappears. Such a specific angle is named by the author as Lousiness Vertical Critical Angle. 3. The best textile composition to decrease lousiness defect is plan weave, while twill and satin weave show more lousiness with the same silk fiber. 4. Lousiness was classified as Lousiness A, B, ana C of which A was the general lousiness, B was the group type, and C was the glucose type and the standard photographs for the lousiness grading of these types were prepared. 5. The proper soap-refining hours of silk for lousiness test was eight hours. 6. The greater the difference of fiber diameter between the cocoon single bave and the splitend was, the more lousiness was composed. The normal splitends were measured as 1/4-1/5 of the main fiber. 7. The lousiness was found at the cocoon shape ends more than other parts, and found at the middle cocoon layer than other layer which was imagined to be as a result of poor uniform bave spinning of silk worm. 8. Female cocoon had more lousiness than the male cocoon. 9. It was found that there was a great possibility to have the splitends through the observation of the anatomical silkgland, and the author reached a conclusion that the lousiness can be improved to a certain degree only by the elimination of abnormal silk gland from the breeding aspects. 10. The cocoon bave of the offspring after super refining lousiness test and selection showed more improved lousiness defect than that of the parents.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.233-241
• /
• 2016

Experiments were carried out to quantify the topographic effects on attenuation of sunshine in complex terrain and the results are expected to help convert the coarse resolution sunshine duration information provided by the Korea Meteorological Administration (KMA) into a detailed map reflecting the terrain characteristics of mountainous watershed. Hourly shaded relief images for one year, each pixel consisting of 0 to 255 brightness value, were constructed by applying techniques of shadow modeling and skyline analysis to the 3m resolution digital elevation model for an experimental watershed on the southern slope of Mt. Jiri in Korea. By using a bimetal sunshine recorder, sunshine duration was measured at three points with different terrain conditions in the watershed from May 15, 2015 to May 14, 2016. The brightness values of the 3 corresponding pixel points on the shaded relief map were extracted and regressed to the measured sunshine duration, resulting in a brightness-sunshine duration response curve for a clear day. We devised a method to calibrate this curve equation according to sky condition categorized by cloud amount and used it to derive an empirical model for estimating sunshine duration over a complex terrain. When the performance of this model was compared with a conventional scheme for estimating sunshine duration over a horizontal plane, the estimation bias was improved remarkably and the root mean square error for daily sunshine hour was 1.7hr, which is a reduction by 37% from the conventional method. In order to apply this model to a given area, the clear-sky sunshine duration of each pixel should be produced on hourly intervals first, by driving the curve equation with the hourly shaded relief image of the area. Next, the cloud effect is corrected by 3-hourly 'sky condition' of the KMA digital forecast products. Finally, daily sunshine hour can be obtained by accumulating the hourly sunshine duration. A detailed sunshine duration distribution of 3m horizontal resolution was obtained by applying this procedure to the experimental watershed.