• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.60-60
• /
• 1999

단결정 다이아몬드의 열전도도는 약 22W/cm.K로 열전도도가 가장 큰 물질로 알려져 있으며, 비저항은 10$\Omega$.cm 이상의 높은 값을 갖는다. 대부분 열전도도가 큰 것으로 알려진 물질들은 Cu, Ag 등과 같이 전자의 흐름에 의하여 열이 전도되기 때문에 큰 전기전도도를 함께 갖는 것일 일반적이다, 그러나, 다이아몬드는 빠른 phonon의 이동에 의하여 열전도가 이루어지므로 전기적으로 절연 특성을 갖으면서도 큰 열전도가 가능하다. 단결정 다이아몬드는 고방열 절연체로서 이상적인 물질 특성을 보여준다. 전기절연성을 갖는 열전도층으로 다이아몬드를 이용하기 위해서는 저가로 제조가 용이한 화학기상증착법을 이용하여야 한다. 화학기상증착법으로 제조된 다결정 다이아몬드 박막의 열전도도는 약 21W/cm.K로 여전히 매우 높은 값을 갖는 것으로 알려져 있지만, 비저항 값은 인위적으로 도핑을 전혀 하지 않은 상태에서도 106$\Omega$.cm 정도의 낮은 값을 갖는다. 전혀 도핑을 하지 않았음에도 전도성을 갖는 특이한 특성을 다결정 다이아몬드가 보여 주고 있으므로 이에 대한 연구는 주로 전기 전도성을 갖는 특이한 특성을 다결정 다이아몬드가 보여주고 있으므로 이에 대한 연구는 주로 전기전도성의 원인을 규명하는데 집중되고 있다. 아직 명확한 전도 기구는 제안되고 있지 못하지만 전도성의 원인은 수소와 관련이 있고 전도는 표면을 통하여 이루어진다는 것이다. 산(acid)을 이용하여 다결정 다이아몬드 박막을 세척하면 전기 전도성이 사라지고 높은 저항값을 갖는 박막을 얻게 되는데 박막을 세척하는 공정은 박막의 표면만을 변호시키므로 표면에 있던 전기전도층이 용액 처리를 통하여 제거되므로 전도성이 사라진다고 생각하는 것이다. 그러나, 본 연구에서는 두께가 두꺼울수록 저항값이 증가하는 것이 관찰되었고 기존의 측정방식인 수평적인 저항 측정법에 대하여 수직적 방향으로 저항을 측정하면 저항값이 1/2 정도 작게 측정되었다. 다결정 다이아몬드에서 표면을 통하여 전류가 흐른다면 박막의 두께에 따른 변화가 나타나지 않아야 하고 수직적인 전류 측정법이 오히려 더 큰 저항을 보여주어야 한다. 기존의 표면 전도 모델로는 설명되지 못하는 현상들이 관찰되었고 정확한 전기 전도 경로를 확인하기 위하여 전해 도금법으로 금속들이 석출되는 모습을 관찰하였다. 이 방법을 통하여 다결정 다이아몬드에서 전류는 결정입계를 통하여 전도됨을 알 수 있었다. 온도에 따른 다결정 다이아몬드의 전기전도도 변화를 관찰하였고 이로부터 활성화 에너지 값을 구할 수 있었다. 다결정 다이아몬드의 전도도는 온도에 따라서 0.049eV와 0.979eV의 두 개의 활성화 에너지를 갖는 구간으로 나뉘어졌다. 이로부터 다결정 다이아몬드에는 활성화 에너지 값이 다른 두 종류의 defect level이 형성되는 것으로 추정할 수 있고 이 낮은 defect level에 의하여 전도성을 갖는 것으로 생각된다.

• Composites Research
• /
• v.30 no.1
• /
• pp.59-64
• /
• 2017

Eco-convivial composites with improved properties are essential to present polymer scenario and can be made easily by replacing partially/completely renewable materials either matrix or reinforcement along with few % of additives. In these investigations, Abaca fabric have been used as reinforcement for manufacturing of Vinyl ester composites through VARTM technique and study the effect of alkali surface treatment of abaca fabric and flame retardant additives i.e., ammonium polyphosphate (APP) with halloysite nano-clay (HNT) on mechanical and flame retardant properties. The results concluded that, surface treatment deceased the hydrophilic nature of fabric and enhanced the interfacial bonding with hydrophobic matrix and eventually increased mechanical properties slightly of developed composites. Similarly, the flame retardancy of the composites improved significantly and increases the burning time by varying the wt% of filler concentration.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.117-123
• /
• 2013

This study focuses on the determination of optimal photographing angle and overlapping ratio for automatic image stitching system using a non-metric camera module with motorized head. Photographing overlap was calculated considering the angle of view on different kinds of lenses and moving angle of motorized head per each option, and optimal photographing angle and overlapping ratio could be determined through the experimental result using the operating time, data volume and performance of image stitching. Through this experiment, we could find that it was effective to take a picture with $36^{\circ}$ of interval(33.82% of overlap) in vertical direction and $24^{\circ}$ or $30^{\circ}$ of interval(36.51% or 20.63% of overlap) in horizontal direction using 35mm lens for automatic image stitching system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.157-164
• /
• 1997

This study deals with GPS-photogrammetry practicability by C/A-code reception. It allows data to be acquired and analyzed fast. Combined block adjustment method was applied at the topographical map production of coast-land. And we compared it that of conventional block adjustment. As a result, it was found that accuracy was very sensitive to the arrangement and number of control points. The accuracy in the horizontal and vertical was $\pm{2cm}$ if all of the control points was available. however accuracy was not affected at additional parameters for systematic errors' elimination and it leads to bad results when the number of control points was few and arrangement of control points was not stabilized. GPS observations were added in block adjustment, but the accuracy of block was not upgraded due to the low accuracy of C/A-code reception. So relative positioning method with carrier phases was required for high accuracy and it is expected that CPS photogrammetry with C/A-code will be used widely according to the improvement of observation methods and the development of receiver.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.393-398
• /
• 2007

We studied the mechanism of liquid crystal alignment on polyvinylfluorocinnamate (PVCN-F) films which were irradiated by UV using polarized fourier transform infrared (FT-IR) spectroscopy and ultraviolet/visible (UV/Vis) spectroscopy. UV irradiation of PVCN-F films caused decrease of vinylene -C=C- stretching peak area at $1638cm^{-1}$ and shift of conjugated C:0 stretching vibration at $1712cm^{-1}\;to\;1734cm^{-1}$ which is caused by nonconjugated C=O stretching nitration. To study the orientation direction of 5CB liquid crystal (LC) molecules in the liquid crystal cell with PUV irradiation, rubbing treatment or without any treatment on the PVCN-F alignment layer, we used polarized FT-IR dichroism technique. We successfully measured 5CB LC alignment directions, which are perpendicular to the irradiated PUV polarization direction and parallel to the rubbing direction in the liquid crystal cell without using dichroic dyes.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.643-648
• /
• 2001

Class III malocclusion usually becomes manifested at a very early age, most typically evidenced clinically by the appearance of either an edge-to-edge incisor relationship or an anterior crossbite. Anterior crossbite, by it-self, retards growth of maxilla, and accelerates growth of mandible. So, treatment should be started as early as the patient cooperates, removing any factors or forces that inhibit growth and development in the same physiologic maxillary displacement direction. The facial mask is effective in most developing Class III patients, because the appliance system affects virtually all areas contributing to a Class III malocclusion. Thus, the facial mask can be applied to most developing Class If cases regardless of the specific etiology. In these cases, the results were followed. Anterior crossbite was corrected by anterior movement of maxilla and downward backward rotation of mandible and simultaneously, lower facial height was increased. So, it can be concluded that the facial mask is effective in treating growing patients with a deficient maxilla.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.4
• /
• pp.406-420
• /
• 2009

European economic integration and geographical enlargement brought change in the intra-european trade flow and a trade structure. The first, an european enlargement contributes to the increase in intra-european trade, but its effect relatively becomes smaller successive enlargement. The second, the intra-industry trade increases in the intra-european trade according as an european economic integration and enlargement make possible the economy of scale. In the intra-industry trade, the horizontal intra-industry trade decreases and the vertical intra-industry trade increases. The third, the Western Europe's trade is generally an intra-industry trade, the trade of Southern Europe, Central and Eastern Europe is an inter-industry trade. But the South Europe's trade and Central and Eastern Europe's trade change from the inter-industry trade to the intra-industry trade.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.6
• /
• pp.118-124
• /
• 2009

In order to know the range of install possibles of the horizontal stay without general stay, strength characteristic tests were performed for the Vertical and 80[$^{\circ}$] inclined concrete poles. From the results of one cycle strength tests, the safety factors were 2.8, 2.5 and 2.1 for the poles of general load, heavy load and high strength load, respectively. However, the crack was occurred when the bending bounds of upper part of pole was above 2[$^{\circ}$], and working load was similar to the rated load of pole at this time. Therefore, it could be concluded that the reinforcement by the installation of the stay and the support was necessary certainly, if the bending bounds of pole, which was installed on a solid foundation, are above 2[$^{\circ}$].

• Korean Journal of Remote Sensing
• /
• v.26 no.1
• /
• pp.39-45
• /
• 2010

This study used the keypoint observed simultaneously on two images and on twodimensional intensity image data, which was obtained along with the two point clouds data that were approached for automatic focus among points on terrestrial LiDAR data, and selected matching point through SIFT algorithm. Also, for matching error diploid, RANSAC algorithm was applied to improve the accuracy of focus. As calculating the degree of three-dimensional rotating transformation, which is the transformation-type parameters between two points, and also the moving amounts of vertical/horizontal, the result was compared with the existing result by hand. As testing the building of College of Science at Konkuk University, the difference of the transformation parameters between the one through automatic matching and the one by hand showed 0.011m, 0.008m, and 0.052m in X, Y, Z directions, which concluded to be used as the data for automatic focus.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.17-17
• /
• 2016

이중편파 레이더는 수평 수직반사도($Z_H{\cdot}Z_V$), 차등반사도($Z_{DR}$), 교차상관계수(${\rho}_{HV}$), 차등위상차(${\Phi}_{DP}$) 등 다양한 변수 산출을 통하여 대기 수상체 구분, 우적분포에 영향이 적은 강우량 추정, 밝은 띠(BB, Bright Band)의 탐지 등이 가능하게 됨으로써 수문기상 및 재해관리 분야에 활용성이 점점 더 커지고 있다. 본 연구는 RHI, PPI에서 생산된 레이더 변수를 이용하여 BB를 탐지하고 그 특성을 평가하였다. BB는 레이더를 이용하여 상층대기를 관측할 때 수직단면에서 강수입자가 눈에서 비로 변하는 구간에서 과대하게 높은 반사도가 나타나는 층을 말한다. BB에서는 QPE가 과대 추정되기 때문에, BB의 특성 파악은 레이더의 관측전략 수립과 QPE 보정에 필수적이다. 본 연구에서는 RHI에 의한 $Z_H$의 연직단면분석, RHI와 PPI의 고도각 경사거리(slant range) 빔의 ${\rho}_{HV}$, $Z_{DR}$, $Z_H$에 의한 분석을 통하여 BB의 상단부($BB_{TOP}$), 최정점($BB_{PEAK}$) 및 하단부($BB_{BOTTOM}$)의 고도를 상호 비교 평가하였다. 분석 자료는 KICT X-밴드 레이더에 의한 관측한 2015년 10월 21일의 층상운에 의한 강우를 이용하였다. RHI에 의한 $Z_H$의 연직단면 분석결과 $BB_{top}$, $BB_{bottom}$ 및 $BB_{peak}$는 KICT 레이더 고도(MSL : 40m)를 기준으로 각각 3.26Km, 2.3Km($BB_{width}$: 0.96km) 및 2.7Km로 나타났다. 이 같은 결과는 다른 2가지 분석방법에서도 유사하게 나타나고 있으며, 이는 BB분석을 위해 다양한 변수를 통한 신뢰성 있는 BB의 특성을 파악할 수 있는 기반을 제공한다.