• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.46-66
• /
• 2002

High-resolution multichannel seismic data were collected in the coastal area near the Gori nuclear power plant to investigate Quaternary fault pattern and timing. A 12 channel streamer, a sparker, and a portable recorder were used for data acquisition. Because the group interval of the streamer was 6.25 m and the sparker can generate acoustic waves with the frequency content of up to 500 Hz, the data show a significant improvement both in horizontal and vertical resolution. The area surveyed is covered with 30-40 m thick Holocene sediments that constitute the mud belt along the southeastern coast of Korea. The survey area is characterized by the well discriminated Pleistocene and Holocene boundary and shallow gas-charged zones. A number of Quaternary faults were found in the sediment column, that are nearly vertical and extend north-south. The Quaternary faults, arranged at a spacing of a few hundred meters, suggest that they were formed in response to compression, although some of them reveal extensional characteristics. Locally, faults disrupt Incised-channel fills that are interpreted to have formed in the early stage of transgression after the beginning of the Holocene. Seismic sections suggest that shallow gas in the mud belt sediments made its way upward through the fractured fault planes. The tectonism responsible for the opening of the East Sea has not persisted since the late Miocene, but vigorous Quaternary faulting activity in the vicinity of the southeastern Korean Peninsula indicates that tectonic stability has yet to be achieved in this region underlain by the hotter than normal mantle.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.79-88
• /
• 2008

In this study electromagnetic fields near electric power lines were derived by dipole antenna theory and electromagnetic fields near 3 phase power lines with vertical configurations were formulated and could be computed easily using these formula. It seems that those formula could be applicable to the consideration of electromagnetic fields during the design of transmission and distribution lines. Those formulated equations on elements of electromagnetic fields were applied to the model of a transmission-line system and were calculated by Matlab programs. The calculation results are follows. For variation of horizontal distance profiles of $E_y$ and $B_z$ are same each other, and also those of $B_y$ and $E_z$ are same each other. This means that coupled elements of E and B are perpendicular each other and have the propagation direction of the right-hand system such as $x{\rightarrow}E_y{\rightarrow}B_z$. Resultant electric field E is dominated by the element $E_y$ and resultant magnetic field B is dominated by the element $B_z$.

• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.354-360
• /
• 2005

A high performance LWIR(long wavelength infra red) zoom thermal imaging sensor using $480{\times}6$ HgCdTe(MCT) linear detector has been developed by ADD Korea. The optical system consists of zoom telescope having large objective about 190 mm diameter and optically well corrected scanning system. The zoom ratio of the telescope is 3: 1 and its magnification change is performed by moving two lens groups. And also these moving groups are used for athermalization of the system. It is certain that the zoom sensor can be used in wide operating temperature range without any degradation of the system performance. Especially, the sensor image can be displayed with the HDTV(high definition television) format of which aspect ratio is 16:9. In case of HDTV format, the scanning system is able to display 620,000 pixels. This function can make wider horizontal field of view without any loss of performance than the normal TV format image. The MRTD(minimum resolvable temperature difference) of the LWIR thermal imaging sensor shows good results below 0.04 K at spatial frequency 2 cycles/mrad and 0.23 K at spatial frequency 8 cycles/mrad at the narrow field of view.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.57-63
• /
• 1998

The electrical resistivity method, one of old and widely used geophysical prospecting methods, has extended its scope to civil & environmental engineering areas. The electrical resistivity imaging technique was performed at the waste disposal site located in Junju to verify the applicability to the environmental engineering area. The dipole-dipole array, with the dipole spacing of 10 m, was applied along eight survey lines. The field data were obtained under the control of automatic acquisition softwares and topographic effects were corrected during processing stage. The processed resistivity images show that very low resistivity develops inside the disposal site and the distribution of low resistivity is exactly in accord with the boundary of the site except the river side. The depth of low resistivity zones is deeper toward the river side, which is interpreted that there is a high possibility for contaminants to be scattered to the river. From resistivity images, it was feasible to deduce the depth of waste disposal as well as the horizontal/vertical distribution of the contaminated zone, which proved the applicability of the electrical resistivity imaging technique to the environmental engineering area.

• Journal of Internet of Things and Convergence
• /
• v.9 no.6
• /
• pp.29-35
• /
• 2023

Braille can be said to be an essential means used for the visually impaired to communicate or acquire information on visual materials in their lives. However, the rate of interpretation of braille among the visually impaired is insignificant at 5%. As a result, libraries for the visually impaired produce various types of materials that can obtain various information for the visually impaired and also have assistive technology equipment to interpret them. However, the publication rate of Braille books is too low to purchase and interpret Braille books. In addition, the Braille interpretation rate is too low, and the purchase of assistive technology devices is too expensive and slow. Therefore, in this paper, we implemented a system that displays Braille using Arduino to help visually impaired people in addition to the existing methods they use to obtain information. For Braille display, Korean data is transmitted from Python through serial communication between Python and Arduino, and Arduino, which receives the data, compares the Korean data with the data in the array in the program and retrieves the Braille values of the Korean data. Here, the Braille value was expressed by controlling the servo motor perpendicular or horizontal to the body using white and black circles based on the Braille list.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.815-824
• /
• 1997

The purpose of this study is to develop the basic algorithm for the finite element method modeling of individual malocclusions. Usually, a great deal of time is spent in preprocessing. To reduce the time required, we developed a standardized procedure for measuring the position of each tooth and a program to automatically preprocess. The following procedures were carried to complete this study. 1. Twenty-eight teeth morphologies were constructed three-dimensionally for the finite element analysis and saved as separate files. 2. Standard brackets were attached so that the FA points coincide with the center of the brackets. 3. The study model of a patient was made. 4. Using the study model, the crown inclination, angulation, and the vertical distance from the tip of a tooth was measured by using specially designed tools. 5. The arch form was determined from a picture of the model with an image processing technique. 6. The measured data were input as a rotational matrix. 7. The program provides an output file containing the necessary information about the three-dimensional position of teeth, which is applicable to several finite element programs commonly used. The program for a basic algorithm was made with Turbo-C and the subsequent outfile was applied to ANSYS. This standardized model measuring procedure and the program reduce the time required, especially for preprocessing and can be applied to other malocclusions easily.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.509-519
• /
• 2000

Enlow's counterpart analysis explains the complex with anatomic and developmental characteristics where craniofacial aspect of individuals has been developed. The analysis does not compare individual measurement with the normal value from the average of majority but analyzes by comparison of values that each individual has. This study was to clarify the Korean craniofacial skeletal pattern using Enlow's counterpart analysis considering the fact that the craniofacial skeletal pattern has racial and regional variations. This research will be helpful in the future for growth research and research of the orthognathic surgery. For this study, the samples were consisted of 100 Korean adult subjects(50 males and 50 females) who had normal occlusion and pleasing face. Measurement points and lines were established using Enlow's counterpart analysis and they were statistically evaluated. The results indicated that : 1. The average angle between PCF and PMV was $38.54^{\circ}$ in males and $38.43^{\circ}$ in females, and the average Wits' appraisal was -2.51 in males and -2.3 in females. The ramus alignment(R4) was 1.89 in males and 2.36 in females. 2. It shows that females have a longer ramus than the PCF compared to the males, because there was a significant difference in Ramus/PCF horizontal dimensions (Skeletal A3-B3) between female and male subjects 3. It shows that males have a longer mandibular corpus than the maxilla compared to the females, because there was a significant difference in Maxillary/Mandibular arches(Skeletal A4-B4) between male and female subjects 4. In cranial floor+maxilla/ramus+corpus at A and B points(Al-Bl), which represents difference in total horizontal length between the maxilla and mandible, there was no significant difference between males and females. In conclusions, compared to Caucasian, Korean have more depressed midface, prognathic mandible, and ramus that rotates inferioposterior. Also, we observe that Korean women have target ramus posterior cranial base, as compared with Korean men. Consequently, the total length of maxilla and mandible does not show any difference, because man's mandible is longer than maxilla in comparison with woman's one.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.750-756
• /
• 2008

Supernumerary teeth are frequently found in the anterior portion of the maxilla and develop as a result of abnormal proliferation of the dental lamina during tooth germ formation, caused by genetic or environmental factors. They may result in various complications, such as eruption interference, displacement, rotation of adjacent teeth, diastema, eruption into the nasal cavity, and development of dentigerous cyst. The optimal time for surgical extraction of supernumerary teeth has been a controversial issue. Someone prefer early surgical extraction because supernumerary teeth can cause eruption interference and displacement of adjacent teeth, eventually altering occlusion. Others prefer to delay surgical extraction until $8{\sim}10$ years of age in consideration of root maturation of the adjacent teeth and also patient's behavior. When surgical extraction of supernumerary teeth is postponed, there is possibility that impacted supernumerary teeth in the inverted or horizontal position move toward the nasal cavity, hard palate, or premolar area. When such intraosseous tooth migration is combined with the vertical growth of the maxilla, surgical approach becomes even harder. Therefore, possibility of intraosseous tooth migration should be considered as an important factor when deciding appropriate time for surgical extraction. We are presenting cases of mesiodens which showed intraosseous migration during $6{\sim}7$ years of follow-up period since the first diagnosis had been made at the $2{\sim}3$ years of age.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.147-152
• /
• 2013

Purpose: The aim of this study was to propose the position of maxillary anterior teeth and intercanine width measurements based on the incisive papilla in accordance with the cephalic type and gender of dentate Korean adult with normal teeth alignment. Materials and methods: 42 students with Class I normal occlusion, without crowding or spacing, were selected from the Chonnam National University School of Dentistry. The lateral skull radiographs of the subjects were taken and were classified as different cephalic types, based on their PFH / AFH ratios. 42 casts of their maxilla were prepared and both the distance between the upper central incisors and the middle of the incisor papilla was measured with a vernier caliper (A) and the distance between the maxillary canine cusp tips (B) were measured. Statistical analysis was performed using SPSS version 15 and their significance was investigated. Results: For dolichocephalic group, the mean values for A and B were 8.43 (SD: 0.61) and 36.73 (SD: 2.17), respectively. The mean value for A was 8.51 (SD: 1.27) for the mesocephalic group and 8.76 (SD 1.03) for the brachycephalic group. The mean value for B was 35.91 (SD: 1.86) for the mesocephalic group and 37.34 (SD: 2.23) for the brachycephalic group. For the male group, the mean A value was 8.86 (SD: 1.04) and the mean B value was 37.60 (SD: 0.24). For the female group, the mean A value was 8.41 (SD: 0.93) and the mean B value was 36.18 (SD: 2.01). The difference between male and female group in A values were not statistically significant (P>.05). The B values of the male subjects were greater than those of the female subjects and was statistically significant (P<.05). Conclusion: 42 students with normal dentition and occlusion in korea, the distance from the incisive papilla and the incisal edge of maxillary central incisors had no difference in cephalic type or gender. However, the distance between the cusp tip of both canines had significant difference in gender where the male showed higher values than the female, while having no difference in cephalic types.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.3
• /
• pp.224-259
• /
• 1997

The Janggunbong area(this study area) at the central-south part in the North Sobaegsan Massif, Korea, consists mainly of Precambrian(Wonnam and Yulri Formations)-Paleozoic [Joseon Supergroupuangsan Quarzite, Dueumri Formation and Janggun Limestone) and Pyeongan Group (Jaesan and Dongsugok Formations)l metasedimentary rocks and Mesozoic granitoid(Chunyang granite). This study is to interpret geological structure of the North Sobaegsan Massif in the Janggunbong area by analysing rock-structure and microstructure of the constituent rocks. It indicates that its geological structure was formed at least by four phases of deformation after the formation of gneissosity(S0) in the Wonnam Formation and bedding plane(S0) in the Paleozoic metasedimentary rocks. The first phase deformation(D1) formed tight isoclinal fold(F1). Its axial plane(S1) strikes east-west and steeply dips north. Its axis(L1) subhorizontally plunges east-west. The second phase deformation(D2), which was related to ductile shear deformation, formed stretching lineation(L2) and shear foliation(S2). The sense of the shear movement indicates dextral strike-slip shearing(topto-the east shearing). The third phase deformation(D3) formed open inclined fold(F3). Its axial plane(S3) strikes east-west and moderately or gently dips north. Its axis(L3) subhorizontally plunges east-west. The F3 fold reoriented the original north-dipping S1 foliation and D2 shear sense into south-dipping S1 foliation(top-to-the west shear sense on this foliation) at its a limb. The four phase of deformation(D4) formed asymmetric-type open inclined fold(F4) of NE-vergence with NW striking axial plane(%) and NW-NNW plunging axis(L4). The F4 fold partly reoriented pre-D4 structural elements with east-west trend into those with north-south trend. Such reorientaion is recognized mainly in the Paleozoic metasedimentary rocks.