• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.189-206
• /
• 2003

During tunnel excavation in urban area a systematic monitoring is important for the purpose of determination of support type and quantity, as well as for the control of stability of both surface structures and the tunnel itself due to the frequently, and in many cases, abruptly changing ground condition. In Austria absolute displacement monitoring methods have replaced relative displacement measurements by geodetic methods to a large extent. Prompt detection of weak ground ahead of the tunnel face as well as better adjustment of excavation and support to the geotechnical conditions is possible with the help of the improved methods of data evaluation on sites. Deformation response of the ground to excavation starts ahead of the tunnel face, therefore, the deformation and state of the tunnel advance core is the key factor of the whole deformation process after excavation. In other words, the rigidity and state of the advance core play a determining role in the stability of both surface structures and the tunnel itself. This paper presents the results from detailed three-dimensional numerical studies, exploring vertical displacements, vector orientations and extrusions on tunnel face during the progressive advancement for the shallow tunnel in various geotechnical conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1033-1042
• /
• 1994

Dynamic behavior of flexible rectangular liquid containers is analyzed by a two-dimensional coupled boundary element-finite element method. The irrotational motion of inviscid and incompressible ideal fluid is modeled by boundary elements and the motion of structure by finite elements. A singularity free integral formulation is employed for the implementation of boundary element method. Coupling is performed by using compatibility and equilibrium conditions along the interface between the fluid and structure. The fluid-structure interaction effects are reflected into the coupled equation of motion as added fluid mass matrix and sloshing stiffness matrix. By solving the eigen-problem for the coupled equation of motion, natural frequencies and mode shapes of coupled system are obtained. The free surface sloshing motion and hydrodynamic pressure developed in a flexible rectangular container due to horizontal and vertical ground motions are computed in time domain.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.3
• /
• pp.1-8
• /
• 2001

Seismic design forces for bridge components may be determined by modifying elastic member forces of design earthquakes using appropriate response modification factors according to the national design code of bridges Modeling technique of pile foundation system is one of the important parameters which greatly affects the results in the process of the elastic seismic analysis of a bridge system with pile foundation. In this paper, a approximate and simplified modeling technique of a pile foundation system for the practical purposes is presented. The modeling technique is based on the stiffnesses of pile foundation during earthquake. The horizontal stiffnesses are determined from the resistance-deflection curves derived from the results of dynamic field tests using cyclic loads and the vertical stiffness includes the effects of the end bearing capacities and side friction of piles as well as the pile compliances under the expected vertical load level. The applicability of the proposed technique has been validated through the some example bridge analyses.

• KOMUNHWA
• /
• no.56
• /
• pp.93-146
• /
• 2000

Categories of pottery found in southern west parts of Korea are such as, Mounted Cup, Jar, Long necked jar, Pottry stands, Cups with handle and the like. It is believed to date from mid-5c that distinctive production of pottery and its distribution by whi

• Journal of the Korean Geosynthetics Society
• /
• v.4 no.4
• /
• pp.13-21
• /
• 2005

This paper presents the results of an investigation on the effects of settlement of foundation on the behavior of geosynthetic-reinforced modular block walls in a tiered arrangement using the finite-element method of numerical analysis. A parametric study was performed by varing the foundation condition and offset distance between the tiers and reinforcement length of the lower and upper tier using varified finite-element model. The finite-element analysis provided relevant information on the mechanical behavior of the wall and interaction mechanism between the upper and lowers that was otherwise difficult to obtain from the limit-equilibrium analysis based current design approaches. Practical implications of the findings obtained from this study to current design approaches are discussed in great detail.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.99-106
• /
• 1990

This study was aimed to see the effect of chemical grout on fresh granite joint shear strength. The grouting chemical used in this study was composed of 25% water glass. Direct shear tests were performed on the chemical filled joints, which had been made artificially with granite. The test results show that chemical grouted rock jonts have markedly reduced shear strength comparing with the ungrouted fresh joints and they sheared within chemical grout before the rock to rock contact had been established, while the ungrouted joint sheared between rock surfaces from the beginning of shear deformation. With chemical grouted joints the shear stress slowly reached its maximum without showing distinct peak shear strength. Therefore the shear stiffness of joints were decreased with increasing thickness of grout. but the shear strain at failure was increased with it.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.691-700
• /
• 2008

Contemporary architectural structures have diverse and complex forms. Such structural variety demands requisite performance from the connections in the steel structure so that the latter could resist a horizontal force, such as an earthquake. The connections are the all-important components that create the discontinuous form and that support stress concentration, determining the stiffness and toughness of the entire steel frame. In this study, a real-scale column-to-beam connection was constructed in the 600MPa-grade high-strength and high-performance steel, to test its behavior. Its material and welding characteristics were examined in this study, and its structural performance was analyzed by conducting seismic-resistance tests on the full-scale, cross-shaped column-to-beam welded connections with non-scallop, ordinary-scallop, and reinforced-scallop details. The weld ability of the high-strength, high-performance steel was also evaluated, and data regarding the seismic design for practical application were provided.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1434-1438
• /
• 2004

저수지 수질모형의 기초자료로서의 수체의 수리학적 인자는 물리적인 자료이므로 많은 실측 자료를 필요로 한다. 이러한 자료의 취득을 위하여 수체의 수심을 측정하고, 대상구역의 수계특성을 잘 반영할 수 있도록 수체를 분할하여 각 구간별 수체 중심, 특성길이, 연직 및 수평 단면적, 수표면적, 수체적, 수로경사 등을 구하여 사용한다. 이러한 자료의 취득은 여러 가지 어려움으로 인하여 조사지점이 조밀하지 못하거나 계간방법이 개발되지 못하는 등의 이유로 인하여 실제값과 상당한 차이를 나타내기도 하므로 이를 개선할 수 있는 방법을 제시하고자 한다. 최근에 개발된 다중 음향탐사기 (MBES)는 초음파를 발사하여 하상에서 반사한 파의 시간을 측정하고 거리로 환산하여 수심을 측정하는 것으로 여러 지점의 수심을 동시에 스캔할 수 있다는 장점이 있다. 또한 MBES는 수신기의 지향각이 존재하므로 파의 반사지점을 정확하게 파악할 수 있다. 단일 음향측심기는 측선을 따라 수심을 측정하므로 조사간격이 넓어 정확한 수로정보를 얻기에는 미흡한 점이 있으나 MBES는 수체 전체를 $1\times1m$ 당 $4\~5$ 번의 측정하고, 변화가 심한 호저면에서도 수심오차 $5\~8 cm$의 고분해능을 갖는다. 이를 이용하면 하상의 수심에 내한 3차원의 연속분포를 생성하고, 하상의 지형적인 특징을 조사${\cdot}$ 분석할 수 있으며 하상의 성상과정에 관한 기초자료로도 활용한 수 있다. 수체정보를 산정할 때 단일 음향측심법은 간접적으로 자료를 취득하므로 주관적인 견해 및 큰 오차를 내포하고 있으나, MBES는 Hypack Max를 이용하여 구획한 구간에 따른 수표면적과 연직단면적 및 수체적을 자동으로 계산한다. 그리고 측정한 자료의 raw data를 이용하면 각 구간에 대한 무게중심을 구하여 중점으로 사용 가능하고, 종방향의 구축을 산정하여 수로의 깊이 및 중심간 길이를 정확하게 계산할 수 있다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.48-54
• /
• 2015

In this study, we propose an innovative lateral force distribution building system between tall buildings by utilizing the difference of moment of inertia, resulting the reduction of lateral displacement and the lateral forces in terms of an alternative for the dense human and increased cost of lands in highly integrated city area. A successive collapse prevention means by providing additional bearing plate between connections is proposed. In addition to that, a more economical vibration reduction is expected due to the suggested tuned mass damper on the surface of spacial structure. In the considered verification examples, reduced drifts at the top location of the building systems are validated against static wind pressure loads and static earthquake loads. The suggested hybrid building system will improve the safety and reliability of the new or existing building system in terms of more than 30% reduced drift and vibration through the development of convergence of tall buildings and spatial structures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4776-4783
• /
• 2014

Many studies have examined the reduction of primary noise sources, but quality-related noise, such as BSR, is rarely studied. This study describes the quantitative BSR test method using a multi-axial simulator. The sine sweep test was conducted to detect the system resonance and its relation to BSR noise with high frequency. This method is applied to the seat frame with/without the vibration durability test. The results showed that the $1^{st}$ lateral resonance leads to higher BSR frequency noise. In addition, the reduction of the lateral mode system stiffness after the durability test results in a decrease in the BSR noise in sine sweep test mode.