• Title/Summary/Keyword: 수퍼페이브

Search Result 15, Processing Time 0.023 seconds

Superpave Construction Guidelines (수퍼페이브 시공 가이드라인)

  • Lee, Seok-Hong
    • 한국도로학회지:도로
    • /
    • v.2 no.4 s.6
    • /
    • pp.37-49
    • /
    • 2000
  • 이 보고서는 수퍼페이브의 개념으로 설계된 혼합물이 시방규정에 만족하기 위하여 꼭 필요한 혼합물의 생산, 포설 및 다짐에 대한 내용을 정리한 것이다. 이 보고서 단독으로는 큰 의미가 없으며, 기존의 일반적인 혼합물에 사용되었던 훌륭한 시공기술이 동시에 사용되어야한다. 수퍼페이브가 적용됨으로 해서 발생되는 혼합물의 가장 큰 변화는 굵은입도의 혼합물사용 및 보다 많은 양의 모난골재사용 그리고 개질아스팔트의 사용 등이다. 이러한 변화들은 약간의 시공순서의 수정을 필요로 하게 된다. 이 보고서는 이러한 것에 대한 몇 가지 제안을 포함하고 있다.

  • PDF

Volumetric Property Difference in Mix Design Results by Superpave and Marshall Method (용적특성상 수퍼페이브 방법과 마샬 방법에 의한 배합설계 결과의 차이점)

  • Doh, Y.S.;Kwon, O.S.;Kim, J.Y.;Kim, K.W.
    • International Journal of Highway Engineering
    • /
    • v.6 no.4 s.22
    • /
    • pp.65-73
    • /
    • 2004
  • Marshall stability and flow don't reflect mechanical property of asphalt mixtures and have little correlation with rutting-related performance. There is often rutting occurred on the asphalt pavement which was constructed using a mixture passing the specification for stability and flow. This study dealt with comparison of volumetric properties of mixtures from Marshall mix design and from Superpave mix design. This study used one binder, three aggregates and two gradations. The mixtures were manufactured by each mix design method. Result showed that OAC, VMA and VFA by Marshall mix design were higher than those by Superpave mix design. This is because Mashall mixture has the gradation prone to rutting and it should be further investigated whether or not the high OAC is direct cause of rutting in asphalt pavement.

  • PDF

A study of Elastic Modulus Tests for Reinforced Subgrade Soil with Cement (시멘트를 첨가한 강화노상토의 탄성계수 평가법)

  • Lee, Kwan-Ho;Jang, Tae-Young;Kim, Seong-Kyum;Kim, Jeong-Ku
    • Proceedings of the KAIS Fall Conference
    • /
    • 2011.05a
    • /
    • pp.288-291
    • /
    • 2011
  • 최근 아스팔트 혼합물의 배합설계법은 기존에 주로 사용하던 빔 및 마샬 배합설계법에서 수퍼페이브 배합설계법으로 점차적으로 바뀌고 있는 추세이다. 수퍼페이브의 배합설계과정에서 중요한 사항 중의 하나는 선회다짐기를 사용하는 다짐방법이다. 아스팔트 포장은 노상 위에 보조기층, 기층, 표층의 순으로 구성되는데 노상은 포장 아래 약 1.0 m의 흙부분으로 포장과 일체로 구성되며 포장체에 작용하는 하중을 최종적으로 지지하는 층이다. 따라서, 수퍼페이브 배합설계법에서 사용하는 선회다짐기를 포장과 일체로 구성되는 노상의 다짐시험에도 적용한다면 각각의 포장층에 같은 원리의 다짐방법을 적용한다는 큰 의미가 있을 것으로 판단된다. 본 논문에서는 일반 노상토에 시멘트와 플라이애시를 첨가한 강화노상토를 선회다짐기를 이용하여 시편을 제작하였고, 각 시편에 대한 탄성계수를 1축압축시험, 공진주시험, LFWD를 이용해 각각 측정하여 각 결과물들의 상관관계를 추정하고자 한다.

  • PDF

Correlation Analysis between Rut Resistance and Deformation Strength for Superpave Mixtures (수퍼페이브 혼합물의 소신변형저항성과 변형강도와의 상관성분석)

  • Kim, K.W.;Kim, S.T.;Kwon, O.S.;Doh, Y.S.
    • International Journal of Highway Engineering
    • /
    • v.6 no.4 s.22
    • /
    • pp.45-53
    • /
    • 2004
  • This study dealt with correlation analysis between deformation strength and rut resistance of asphalt concretes based on binder grade in Superpave specification with changing submerging time. Currently, Mashall mix design is known to have little correlation with rutting related performance. Therefore, some agencies started to use the Superpave method for asphalt mix design. But this method has a weak point in that it can not distinct mechanical property of the asphalt mixtures designed. For solution of these problem, this study used deformation strength, $S_D$, of Kim test which is a new approach under development for finding property which represents rut resistance characteristics of asphalt mixtures under static loading. This study used two aggregates from two regions and five PG asphalt binders. Final rut depth (DR) and dynamic stability (DS) from wheel tracking (WT) test were obtained. and $S_D$ value of the same mixture specimen which was made by gyratory compactor was obtained using loading head [4(1.0)]. Three submerging times 30min, 40min, 50min were used as a test variable at $60^{\circ}C$. Correlation analysis of DR and DS with $S_D$ were performed based on PG grade. It was found out that the $S_D$ has a high correlation with DR and DS of superpave mixtures. The highest $R^2$ was found from the $S_D$ values of 30min. submerged specimen.

  • PDF

A Relation of Viscoelastic Properties to Empirical Properties of Korean Asphalt Binder (국내 아스팔트의 점탄성적 물성과 경험적 물성과의 관계)

  • Kim, Nam-Ho;Lee, Kwan-Ho
    • International Journal of Highway Engineering
    • /
    • v.3 no.2 s.8
    • /
    • pp.113-121
    • /
    • 2001
  • Among the currently available binder specifications, Superpave Performance Grade asphalt specification is regarded as a superior specification on its theoretical background as well as pavement performance relationship. Many difficulties are expected; however, for Superpave implementation in Korea because of heavy burden of equipment cost as well as lack of trained personnel in asphalt industry, which may too much barrier to overcome in Korean situation. As an effort to improve qualify of asphalt binder, recently, people discuss about a possibility of constituting a performance-based asphalt specification using rather easy-to-measure asphalt properties. The objective of this paper is to determine the possibility of constituting a performance-based asphalt specification using an empirical asphalt properties, such as penetration ring and ball softening point rather than using fundamental properties of asphalt. Nine straight asphalts, that covers entire straight asphalt from all Korean refineries, and eighteen modified asphalts that were modified from two modifiers were included in the study. An analysis was made through a comparison between empirical properties and Superpave PG criteria. This study concluded that it may possible to constitute a pseudo-Superpave-like specification using an empirical asphalt properties as a specification criteria. Therefore, more systematic research is needed to constitute the asphalt specification.

  • PDF

Evaluation of Rutting Performance of Hot Mix Asphalt with Compaction Curve of Gyratory Compactor (선회다짐기 다짐곡선을 이용한 아스팔트 혼합물의 소성변형 특성 평가)

  • Park, Tae-Seong;Lee, Byung-Sik;Hyun, Seong-Cheol;Lee, Kwan-Ho
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.7 no.3
    • /
    • pp.59-67
    • /
    • 2007
  • For the time being, HMA test specimen were prepared by Marshall Compaction Method for hot mix asphalt design and evaluated the mechanical properties of HMA at the specified air voids. Gyratory Compaction can simulate the field compaction process and measure the degree of compaction just after field compaction in laboratory. Superpave mix design with Gyratory compactor has been used for characterization of performance. The curve of gyratory compaction can be used to evaluate the permanent deformation potential of hot mix asphalt. In this paper, couple of indices for hot mix asphalt have been showed for hot mix asphalt in Korea. The major properties from gyratory compaction curve are compaction energy index and traffic compaction index. The specific guide line for the potential of hot mix asphalt has been proposed.

A Study on Aggregate Mix Design of Dumbbell-shape Fiber Reinforced Asphalt Concrete Mixture using Bailey Method (베일리 방법을 이용한 아령형 섬유보강 아스팔트 혼합물의 골재 배합설계법 연구)

  • Ham, Sang-Min
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.12
    • /
    • pp.6534-6541
    • /
    • 2013
  • The aim of this study was to develop a fiber-reinforced asphalt mixture that was designed to do the following: 1) address fatigue cracks, which is a major source of damage; and 2) increase the rutting resistance. This study reports the effects of the aggregate mixture design that incorporates a dumbbell-shaped fiber. An experiment was carried out to measure the unit weights and unit weight ratios between the mixture that was compacted and the one that was not. A method to substitute a specific aggregate mixture with the dumbbell-shaped fiber was confirmed using the volume concept according to the Bailey method. The results showed that the weight of the PCS aggregate mixture that need to be replaced was 11.88g when a 0.3% reinforcing fiber was added to the 1950g mixture.

A Study of New High Temperature Grading for Modified and Unmodified Asphalt Binders (개질 및 비개질 아스팔트 바인더의 새로운 고온등급 연구)

  • Huh, Jung-Do;Cho, Gyu-Tae;Nam, Young-Kug
    • International Journal of Highway Engineering
    • /
    • v.3 no.2 s.8
    • /
    • pp.91-102
    • /
    • 2001
  • On the basis of several experiments peformed, Bahia et al. (1998) concluded that the current Superpave PG-grading system failed to characterize grading specification of fill modified binders. This conclusion motivates us to investigate the correct grating system suited for modified asphalt binders. The main concept of this development is originated from the relationship between rut depth and binder properties at high temperatures. A new grading system for modified asphalt binders suggested here somewhat resembles to the unmodified binder grading one developed by Huh et al. (2000). Thus, this investigation will provide a unified single theoretical equation of high temperature grading that can apply both to modified and unmodified binders, and will check its effectiveness with the laboratory and the field rut data reported by independent studies. Successful results observed may allow to construction of a correct grading system in the near future.

  • PDF