• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.593-599
• /
• 2023

There is risk of derailment due to various factors such as vehicle-track load imbalance in curved parts, so urban railways install and operate derailing prevent guard rails. The angle-type derailing prevent guard rail is composed of various parts including the guard angle. Even if derailment does not occur, various damages occur in the components, so continuous maintenance is required. Through the damage status analysis, the components of the angle-type derailing prevent guard rail with high damage frequency were classified, and conditions for the occurrence of various damages were investigated. In addition, a numerical analysis using a precise 3D numerical model was performed to analyze the cause of the damage analytically. In order to analytically simulate the derailment situation, the static ultimate load condition was applied, and the actual drawing of the angle-type derailing prevent guard rails, rails, and wheels was used for modeling. By analyzing the results of the damage status investigation and finite element analysis, we tried to investigate the damage of the components.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.2
• /
• pp.27-36
• /
• 2008

This paper analyzed the effects related to the difference of the geometrical shape of the ground excavation by comparing the displacements of the earth retaining wall of the strut resulting from the change of the excavation breadth B and the excavation length L, adopting the three dimensional FDM analysis. It appeared that the displacement of the earth retaining wall of the strut increases in accordance with the increase of L/B and it decreases as it becomes nearer from the center to the comer where the temporary structural system forms, and the wale member is closured because of the effects of the confining effect by the closure of the earth retaining wall and the wale member. This paper proposed a formula in which the results of three dimensional FDM analysis which considers the shape of the excavation plane can be obtained from those of two dimentional FDM analysis which does not consider the shape of the excavation plane. And the results of the formula were compared with those of the site instrumentation analysis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.39-39
• /
• 2011

하천에서 수공구조물을 설계시 구조물의 규모, 형식, 운영방식, 안정성 등을 검토하기 위하여 일반적으로 수리모형실험과 수치모형실험을 이용한다. 수리모형실험은 자연현상의 왜곡을 최소화하여 검토결과를 얻을 수 있다는 장점이 있지만, 많은 시간과 비용, 인력 및 공간이 필요하기 때문에 단기간에 다양한 검토가 필요한 경우에는 많은 제약이 따른다. 반면에 수치모형실험은 제한적인 조건에서 검토목적 및 용도에 따라 다양한 수치모의기법을 활용하여 상대적으로 낮은 비용과 신속하고 다양한 검토가 가능하다는 장점을 가지고 있다. 그러나 수치모형실험은 어디까지나 자연현상에 대한 수학적, 물리적 기법을 활용한 분석이기 때문에 결과에 대한 신뢰성 확보가 매우 중요하다. 최근에는 컴퓨터의 계산능력 향상과 유체의 복잡한 동수역학적 거동 해석 기법의 다양화, 그리고 많은 적용성 검토 연구결과로 인한 신뢰성 향상 등으로 인해 수치모형실험에 대한 관심이 높아지고 있다. 본 연구는 현재 금강에 건설 중인 금강보에 대하여 다차원 수치모형인 EFDC(Environmental Fluid Dynamics Code)를 이용하여 하천 구조물 및 물리적 환경변화에 대한 정밀수리분석을 실시하기 위한 사전절차로, EFDC 모형을 하천수리해석에 적용할 경우 모형에 포함되어 있는 다양한 변수설정 및 제약조건들에 대하여 적용한계를 검토하고자 한다. 검토방법은 금강보가 건설되기 이전의 하천지형 상황에서 EFDC 모형과 HEC-RAS 모형을 이용한 수리분석을 수행하고, 수리거동 결과 들을 상호 비교 분석 한다. 수치모의 대상구간은 금강보 건설구간을 포함하여 약 20km 구간이고, 대상구간에 대하여 3차원 정밀지형자료를 구축하였으며, 과거 호우사상에 대한 구간 내 관측 수위 및 모형별 계산수위결과를 비교 검토하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.2
• /
• pp.113-122
• /
• 2013

Recently there has been increased interest for the portal and shallow tunnel for an eco-friendly tunneling method. Semi cut & cover tunnel excavation techniques applied to concrete slab and construction and a growing number of cases, but there is no load combinations and arch concrete cross section for the applicable standards. Therefore, in this study, ground conditions and tunnel overburden thickness, thickness of backfill, overburden surface slope angle changes to a variety of conditions in order to propose standards for the semi cut & cover method was performed numerical analysis. Regression analysis method to the analysis of the results of numerical analysis, and linear regression equations derived to classify and organize a rational, economical, and safe semi cut & cover tunneling method based proposed.

• The Korean Journal of Rheology
• /
• v.1 no.1
• /
• pp.46-53
• /
• 1989

유한요소법을 이용하여 애뉼라다이 팽창현상을 수치 해석학적으로 분석하였다. 이보 고는 계속적인 연구의 일부로써 비탄성 비뉴토니안 유체인 지수법칙형의 유체에 대한 모사 이다. 이지수법칙형의 유체는 간단하나 고분자 공정 연구에 많이 쓰이는 구성식으로써, 분석 결과는 환형압축체의 두께는 지수법칙 지수에 비례하여 증가하였다. 높은 전단응력 감소유 체의 경우 두께는 증가하지 않고 감소하였다. 비등온 유체 및 여러 다른 형태의 압출형에 대한 수치해석 결과도 예시하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.4
• /
• pp.56-62
• /
• 2008

This study presents the aerodynamic design and numerical analysis results on a transonic centrifugal compressor which is used for gas turbine systems. Mean-line analysis and quasi-3D analysis are used for the aerodynamic design, and Reynolds-averaged Navier-Stokes analysis is applied to flow analysis of the compressor. The aerodynamic parameters for a transonic compressor, such as pressure coefficient, swirl parameter, blade loading, are discussed, and flow characteristics in the impeller and diffuser are discussed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.629-638
• /
• 2005

본 연구대상 사면은 연장이 300m이고 최대 사면높이가 80m에 달하는 대절토 사면으로 서 총 11 소단으로 이루어져 있으며, 전 사면에 걸쳐 Soil Nail 공법으로 보강이 되어있다. 사면 상단부에 설치된 2개의 경사계를 이용하여 주기적으로 사면의 수평방향 변위 계측을 실시하던 중, 사면 하부의 소단 굴착과정에서 상대적으로 급격한 사변경사 방향의 수평변위가 발생한 것을 확인하였다. 본 연구에서는 사면의 수평방향 변위 계측결과 분석 및 대상 사면에 대한 수치해석을 통하여 사면의 안정성 여부를 판단하고자 하였으며, 굴착단계별 수평방향 변위량 및 변위 양상을 분석함으로써 급격히 증가한 변위의 원인을 파악하였다. 수치해석을 통해 나타난 사면 굴착 단계에 따른 사면 토체의 소성영역을 도시한 결과, 사면 전체에 걸쳐 대규모 파괴면이 나타났으며 파괴활동면이 Soil Nail 로 보강된 영역의 바깥쪽에 위치하여 사면 안정성 확보를 위한 대책방안이 수립되어야 할 것으로 판단되었다. 또한 보다 자세한 원인 규명을 위한 확인 시추조사를 실시하여 하부 지층 특성을 파악하였으며, 하부에 풍화가 심하고 절리 및 균열이 심한 파쇄구간이 분포하고 있음이 확인되었다. 연구 대상 사면의 변위 계측 결과, 수치해석 결과, 확인 시추 조사 결과 및 예상되는 사면 활동의 규모 등을 고려할 때 사변의 안정성 확보를 위한 대책방안이 수립되어야 하며, 본 사면은 억지말뚝과 Ahchor 공법 적용이 가장 적절할 것으로 판단되었다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.923-929
• /
• 2018

In this study, we analyzed the resistance performance and running attitude of a catamaran by numerical analysis with a conventional bow, which is generally applied, and a reverse, protruding bow. The shape of the reverse bow was compared through numerical analysis and model tests. The reverse bow shape showed an improved wave pattern by shifting the generation position of the forward divergent wave to the aft in comparison with a conventional bow shape. This effect was found to be effective in determining resistance and stable running attitude. The hull resistance improved by about 2.95 %. The comparative numerical analysis and model test for the reverse bow shape completed in this study should be useful for future hull design application.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.12
• /
• pp.39-45
• /
• 2023

In this paper, a track irregularity according to adjacent deep excavation of railway was analyzed using three-dimensional numerical analysis. The construction for excavation adjacent to the railway track is likely to have a negative impact on train operations. Despite mandatory assessments of the stability and impact on adjacent structures during construction, reports continue to indicate ongoing settlement and track irregularity resulting from construction. Changes in the groundwater level and stress state of the ground due to excavation are pointed out as causes for settlement and track irregularity in structures adjacent to the excavation. In this study, therefore, numerical analysis was conducted taking into account factors that induce track irregularity during adjacent excavation work as variables. The KRL-2012 standard train load was applied to simulate operating trains. As a results, The position of the train load, the distance from the excavation point, had a significant impact on track irregularity, and there was a significant occurrence of track misalignment when the train load was applied. The impact of the groundwater level was not significant.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.1
• /
• pp.13-26
• /
• 2023

Recently, as the development of underground spaces has become active due to rapid urbanization and population density, interest in the ground behavior according to the construction of underground spaces is increasing. In large cities with high population density and many buildings, ground subsidence has a great impact on structures and there may be a risk of collapse, so the analysis of ground behavior due to underground construction is essential. Previous studies have been conducted on the subsidence pattern of the surface and the deformation of the tunnel when constructing the tunnel, but analysis has rarely been conducted by using actual topographic information. Therefore, this study analyzed the difference in ground behavior between the actual topography and the flat topography. As a result, it was confirmed that ground settlement occurs at higher elevations, such as in mountainous topography, and when the numerical analysis is performed considering topographical information, the crown settlement of the tunnel is up to about approx. It showed a difference of 10 mm, and it was found that the sensitivity was less in the case of displacement of tunnel wall compared to the crown settlement and ground settlement. The numerical analysis considering the actual GIS-based topographic information presented in this study can be used to obtain more accurate surface subsidence data to understand the behavior of the upper structure due to tunnel excavation.