• Spatial Information Research
• /
• v.16 no.2
• /
• pp.193-206
• /
• 2008

If stereo images is used for Digital Elevation Model (DEM) generation, a DEM is generally made by matching left image against right image from stereo images. In stereo matching, tie-points are used as initial match candidate points. The number and distribution of tie-points influence the matching result. DEM made from matching result has errors such as holes, peaks, etc. These errors are usually interpolated by neighbored pixel values. In this paper, we propose the DEM generation method combined with automatic tie-points extraction using existing DEM, image pyramid, and interpolating new DEM using existing DEM for more reliable DEM. For test, we used IKONOS, QuickBird, SPOT5 stereo images and a DTED level 2 data. The test results show that the proposed method automatically makes reliable DEMs. For DEM validation, we compared heights of DEM by proposed method with height of existing DTED level 2 data. In comparison result, RMSE was under than 15 m.

• Spatial Information Research
• /
• v.22 no.4
• /
• pp.59-65
• /
• 2014

Recently, increasing demand for 'Digital Elevation Model(DEM)' to climate change research and various development by global warming in the Arctic region. So we need to verify the accuracy to utilize DEM. In this research, we verified 'ASTER GDEM' and 'GIMP DEM' in several DEM which constructed in the Greenland that most of the area is covered ice sheet. We divided greenland into two part, ice sheet area and non ice sheet area by using the ESA globcover. Then, comparing a difference between 'ASTER DEM', 'GIMP DEM' and ICESat elevation data to verify the accuracy. As a result, GIMP DEM has higher accuracy in ice sheet area and ASTER GDEM has higher accuracy in non-ice sheet area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.223-235
• /
• 2020

In this study, we propose an approach for calibrating the elevation of a DEM (Digital Elevation Model), one of the key data in realizing unmanned aerial vehicle image-based precision agriculture. First of all, radiometric correction is performed on the orthophoto, and then ExG (Excess Green) is generated. The non-vegetation area is extracted based on the threshold value estimated by applying the Otsu method to ExG. Subsequently, the elevation of the DEM corresponding to the location of the non-vegetation area is extracted as EIFs (Elevation Invariant Features), which is data for elevation correction. The normalized Z-score is estimated based on the difference between the extracted EIFs to eliminate the outliers. Then, by constructing a linear regression model and correcting the elevation of the DEM, high-quality DEM is produced without GCPs (Ground Control Points). To verify the proposed method using a total of 10 DEMs, the maximum/minimum value, average/standard deviation before and after elevation correction were compared and analyzed. In addition, as a result of estimating the RMSE (Root Mean Square Error) by selecting the checkpoints, an average RMSE was derivsed as 0.35m. Comprehensively, it was confirmed that a high-quality DEM could be produced without GCPs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.321-321
• /
• 2022

유역 모델링은 유역에 강우의 유출 과정을 재현할 수 있는 과정이다. 과거 유역 모델링은 1차원 수준에서 유출과정을 모의하는데 그쳤으나, 기술이 발전함에 있어 입력하는 매개변수 수가 증가함에 따라 모의값의 신뢰성이 높아지고 있다. 본 연구에서는 다양한 매개변수 중 공간매개변수로써 널리 활용되고 있는 수치표고모델의 신뢰성과 범용성을 확인하고자 한다. 유역모델링 연구에 있어, 수치표고모델 정확성은 결과값의 신뢰성을 좌우하는 중요한 인자 중 하나이다. 수치표고모델이란 실제 지형이 나타내는 표고 정보를 수치화 하여 격자 안에 담은 형태의 파일로 대표적으로 DEM(Digital Elevation Models)과 DSM(Digital Surface Models)로 나눌 수 있다 DEM의 경우 해당 지형의 고도정보만을 담고있으며, DSM은 지표면 상의 나무, 건물 등 포함한 지표면의 고도를 담고 있다. 현재 NASA에서는 전 지구의 30m격자 크기로 SRTM-DSM을 제공하고 있으며, 우리나라 국토지리정보원에서도 90m 격자크기의 DEM을 제공하고 있다. 본 연구에서는 남한강 유역의 수치표고모델을 세 가지 Case로 나눠서 유출량 변화 검토를 진행하였다. 산지가 많은 남한강 유역의 10개의 소유역을 선정하였고, 다음과 같이 3개의 Case를 적용하였다. Case1, DEM 자료를 입력했을 경우, Case2, DSM 자료를 입력했을 경우, Case3 DSM+DEM 자료를 입력했을 경우, 각 Case에 대해 유출량을 산정하였고, 그 결과값을 분석하였다. 해당 유역에 세 가지 Case 모두 유출량의 변화량의 큰 차이를 보이지 않았으며, 공간매개변수 적용에 있어 타당성을 보였다. 따라서 본 연구는 인공위성을 통해 산출된 수치표고모델의 신뢰성을 확인 하였고, 활용가능성을 검토 하였다. 이에 따라 향후 연구에 수치표고모델 적용에 있어 미계측유역에도 활용가능한 연구로 기여할 수 있을 것으로 판단된다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.254-259
• /
• 2008

지형의 표고값물 격자간격으로 표현하는 수치표고모델(DEM)은 지형분석을 위한 GIS데이터 활용과 휴대전화 중계안테나의 영향권 분석, 정밀지오이드 계산을 위한 지형효과계산 등 여러 가지 분야에 활용되고 있다. 본 연구에서는 이렇게 활용성이 증가하고 있는 수치표고모델을 수집하고 또 진주시 지역을 대상으로 LiDAR촬영을 통한 LiDAR 수치표고모델을 구축하여 그 정확도를 분석하고자 하였다. 연구에 활용된 수치표고모델은 GTOPO30, SRTM-3, 지형도(1/50,000) 독취 DEM, 환경부 DEM, 항공사진에 의해 생성된 DEM, 그리고 LiDAR DEM의 6가지이며, 정확도 분석을 위해 GPS측량과 수준측량이 동시에 실시된 409점의 진주시 3차원 도시기준점 성과를 이용하였다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.106-114
• /
• 2018

DEM(Digital Elevation Model) are now easily produced with advancing remote sensing technology. Depending on desired task, UAV can produce high resolution DEM. But high resolution comes with issues of data storage and processing time and cost. To check the effect of DEM resolution, this study compares six geomorphological parameters derived from different resolution DEM in a test area around Chuncheon, Korea. The comparison analysis was based on statistics of each derivatives of slope, curvature, flow direction, flow accumulation, flow length and basin. As a result, it was found that DEM remained unchanged and so did the flow accumulation area. However, slope, curvature, flow length and basin numbers were decreased with the normalization of increasing pixel size. DEM resolution should be carefully selected depending on the precision of application required.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.2
• /
• pp.139-149
• /
• 1991

In general, Digital Elevation Models(DEM) are constructed in a grid format for this form is advantageous to capture data automatically and is easy to manipulate. But, grid DEM requires vast volumes of data to represent terrain features finely and accurately as its data is sampled in a regular space. This paper aims at constructing compact DEM by selecting the significant points from grid DEM which affect well the terrain features. For the purpose, the significant points is detected by the high-pass filtering using Laplacian operator and gradient operator. The results of this study show that the Laplacian operator is more efficient than the gradient operator in selecting the significant points for compact DEM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.441-448
• /
• 2011

Lately, digital restitution was became common using digital aerial photos. Therefore, we can obtain three-dimensional data. As a plotting-maker is checked by naked eye, plotting original data is very useful for making reliable three-dimensional data including contour and elevation point layers. In this study, we want to make precise and accurate digital elevation model using plotting original data. Contour and elevation point layers was extracted in digital map and break line was extracted in plotting original data. And then, compared both of results. For comparison, we selected slight slope and complex topography area like a residence area, mountain and agricultural land. We extracted break line deleting layer until obtaining ideal digital elevation model. As the results, We could extract contour, elevation points, eight road and two boundary layers using break lines. And We could obtain precise elevation model. Editing break lines, the distortion of digital elevation model could be minimized in the complex and sharp slope area.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.461-471
• /
• 2015

In this study, we generated orthoimages and Digital Elevation Model (DEM) from Unmanned Aerial Vehicle (UAV) to confirm the accuracy of possibility of geospatial information system generation, then compared the DEM with the topographic height values measured from Real Time Kinematic-GPS (RTK-GPS). The DEMs were generated from aerial triangulation method using fixed-wing UAV and rotary-wing UAV, and DEM based on the waterline method also generated. For the accurate generation of mosaic images and DEM, the distorted images occurred by interior and exterior orientation were corrected using camera calibration. In addition, we set up the 30 Ground Control Points (GPCs) in order to correct of the UAVs position error. Therefore, the mosaic images and DEM were obtained with geometric error less than 30 cm. The height of generated DEMs by UAVs were compared with the levelled elevation by RTK-GPS. The value of R-square is closely 1. From this study, we could confirm that accurate DEM of the tidal flat can be generated using UAVs and these detailed spatial information about tidal flat will be widely used for tidal flat management.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.2
• /
• pp.131-136
• /
• 2003

The method that selects reference points for interpolation is very important in Digital Elevation Model. However, there is no definition of an accurate standard until now, so users select the reference points for interpolation at their option. This paper aims to study on the accurate selection of the reference points for interpolation of DEM. This paper analyzed the method using the number of points and the reference points selection method by using the average distance calculated, from irregular points. Based on the analysis of the results, it shows that the Kriging method applying of the average distance is more efficient in construction of DEM.