• Journal of the Korean earth science society
• /
• v.34 no.6
• /
• pp.507-514
• /
• 2013

Recent reports about Mt. Baekdusan indicate an increasing potential of lahar generation due to volcanic activity around Lake Cheonji. In this study, we model lahar assuming volcanic activity underneath the caldera located at the top of Mt. Baekdusan. Lahar-inundation hazard zones (LAHARZ), software that runs within a Geographic Information System (GIS), was used for lahar modeling in various conditions of digital terrain resolution and model parameters. The sensitivity analysis of model parameters shows that both sink threshold and terrain resolution have limited impact on the modeling result. Combinations of stream threshold and resolution indicate distinctive distributions in stream delineation. The limitations of LAHARZ seem to largely be associated with the assumption of an existing flow generation algorithm. However, the impact of different resolutions on the final lahar extent was found to be small.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.17-26
• /
• 1993

This study aims to develop an effective model of the optimum route determination by using digital terrain model. So in this study I select testing areas and analyse comparing the usual method with the digital terrain model method. And then I present one of the optimum route determination models by analysing an anticipated view and other roads according to the development plan. In usual method, the selected area was analysed by using panoramic terrestrial and aerial photograph. But in this study I represent the present terrain by using digital terrain materials which was acquired by a check form map of the selected area, and predict the route line according to the view points by using basic development plan. As a result of using the digital terrain model method in the optimum route determination with terrestrial photograph, it is possible to explain the terrain in detail when the present conditions terrain is analysed. As we can anticipated many sided road in large scale development plan with digital terrain materials which was used in analysing the present terrain, it is possible to lead to more effective route planning, landers planning and the optimum road determination than the usual method in the basic plan.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.541-550
• /
• 2022

A pre-existing landform is created by weathering and erosion along the bedrock fault and the weak zone. A neotectonic landform is formed by neotectonic movements such as earthquakes, volcanoes, and Quaternary faults. It is difficult to clearly distinguish the landform in the actual field because the influence of the tectonic activity in the Korean Peninsula is relatively small, and the magnitude of surface processes (e.g., erosion and weathering) is intense. Thus, to better understand the impact of tectonic activity and distinguish between pre-existing landforms and neotectonic landforms, it is necessary to understand the development process of pre-existing landforms depending on the bedrock characteristics. This study used a two-dimensional numerical landscape evolution model (LEM) to study the spatio-temporal development of landscape according to the different erodibility under the same factors of climate and the uplift rate. We used hill-slope indices (i.e., relief, mean elevation, and slope) and channels (i.e., longitudinal profile, normalized channel steepness index, and stream order) to distinguish the difference according to different bedrocks. As a result of the analysis, the terrain with high erosion potential shows low mean elevation, gentle slope, low stream order, and channel steepness index. However, the value of the landscape with low erosion potential differs from that with high erodibility. In addition, a knickpoint came out at the boundary of the bedrock. When researching the actual topography, the location around the border of difference in bedrock has only been considered a pre-existing factor. This study suggested that differences in bedrock and various topographic indices should be comprehensively considered to classify pre-existing and active tectonic topography.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.4 s.38
• /
• pp.61-70
• /
• 2006

This paper presents photogrammetric processing to generate digital elevation models using SPOT-5 HRG stereo images and deals with the accuracy potential of HRG (High Resolution Geometry) supermode imagery for DEM generation. After bundle adjustment was preformed for sensor modelling, digital surface models were generated through the procedures of Epipolar image resampling and image matching. The DEM extracted from HRG imagery was compared along several test sections with the the refernce DEM which was obtained from the digital topographic maps of a scale of 1 to 5000. The ratio of the zone with DEM errors less than 5m to the whole zone was 53.8%, and about 2.5m RMSE was showed when assuming that the zones larger than 5m were affected by clouds, water bodies and buildings and excluding those zones from accuracy evaluation. In addition, the three-dimensional bird's eye view model and 3D building model were producted based on the DSM which was extracted from SPOT-5 HRG data.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.207-220
• /
• 1997

This study aims to develope the production method of digital image map of high capable utiliy and terrain interpretability using aerial photo and Geospatial Information System. Theory and efficient practical method was studied to generate tile digital image map with low-cost personal computer system using the merging procedure of raster scanned aerial photo and vector topographic map. Determination theory of ground coordinates, digital image processing, production of digital elevation model was reviewed. And some chariteristics of digital image map, image collection method and significant concepts of digital image processing was studied. Also input and output way of image data to generate the digital image nap, production method of orthophoto map using aerial photo through digital differential rectification was studied. As the result, digital image map was produced and analyzed through the above mentioned procedures.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.464-464
• /
• 2015

수문해석을 수행할 때 유역의 지형으로 부터의 얻어진 수문인자를 사용한다. 유역의 경사나 흐름방향과 같은 지형적인 수문인자는 DEM 자료를 이용하여 여러 수치계산과정을 통해 얻을 수 있다. 이는 특히 유역 수문해석에 있어 유역 특성치 및 수문 인자들의 공간적으로 분포시켜 접근하는 분포형 모형에서 지형적인 입력요소 로 중요하게 사용된다. 본 연구에서는 아래와 같은 지형 수문인자 추출 모듈을 개발하고 사용하고자 한다. * Pit Remove : DEM에서 갱격자 제거 * Flat Remove : DEM에서 평격자 제거 * Flow Direction : 흐름방향 결정 * Flow Accumulation : 흐름 누적계수 결정 * Stream Definition : 하천영역 결정 * Watershed Delineation : 유역 생성 위의 모듈은 Java 오픈소스 프로그램으로서 분포형 수문해석 모형의 한 부분으로서 사용 가능하며, GIS 프로그램에 의존하지 않고 사용할 수 있다. 이 모듈은 이후 분포형 수문해석 프로그램 개발에 사용할 계획이며 연구에 사용되는 컴퓨팅 도구와 환경에 독립적으로 사용이 가능하다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.1
• /
• pp.58-71
• /
• 1986

A Digital Terrain Model (DTM) consists of two components;one is sampling of the terrain imformation, and the other is interpolation. The present study aims at the investigation of the accuracy and efficiency of Moving Average and Linear Prediction interpolation methods by numerical experiment. Basic input data are the elerations in square grid which procured by photogrammetry, and the accuracy of each interpolation is investigated on different grid size, terrain type and pattern of reference points.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.256-256
• /
• 2021

Saint-Venant 방정식은 수평규모가 수심규모보다 큰 천수흐름을 기술하는 수리동역학 모형으로 지난 수십년간 공학적 분야에서 널리 이용되어 왔다. 최근에도 기후변화에 따른 도시 홍수의 위기 증대로 홍수위기관리의 관심이 높아짐에 따라 홍수파(flood wave), 도시침수(urban inundation), 돌발홍수(flash flood) 등의 신속한 예측을 위한 Saint-Venant 방정식의 연구가 활발히 진행되고 있다. 그러나 도시와 같은 인공구조물이 즐비한 상황에서 천수흐름을 해석하는 고전적인 수치해법들은 다양한 불연속 지형들의 존재로 인하여 불안정하며 지배방정식의 정해로 수치해가 잘 수렴하지 않는 문제가 있다. 지난 수년간 이를 해결하기 위해 불연속한 지형을 안정적으로 해결할 수 있는 수치기법의 연구가 진행되어 왔으나, 정해로의 수렴성, 정확성에 관하여 연구가 부족한 실정이다. 본 연구는 수치해법의 주요 구조를 구성하는 Saint-Venant 방정식의 불연속한 지형조건에 대한 리만 문제의 정해를 연구하였다. 쌍곡선형 시스템의 특징을 고려하여 요소파들(elementary waves)의 공식을 유도하였는데, 질량과 에너지의 보존법칙에 위배되지 않으며 운동량이송부의 비선형성과 지형의 불연속에 의한 비엄격성을 고려할 수 있는 조건을 제시하였다. 또한, 유도된 요소파들을 바탕으로 L-M & R-M 커브이론(Han et al. 2014)을 사용할 수 있는 조건과 당위성을 증명하였고, 이를 바탕으로 Saint-Venant 방정식의 정해법을 구성하였다. 리만문제의 다양한 초기조건들을 바탕으로 모든 경우의 정해 구조를 조사하였고, 이를 통해 불연속 지형에 대한 Saint-Venant 지배방정식의 정해가 다수해를 갖을 수 있음을 보였으며, 이를 근사할 수 있는 수치기법의 전략을 소개하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.64-68
• /
• 2011

본 연구에서는 일반 좌표계를 사용함으로써 자유수면이 매시간 변화하는 계산격자를 구성해야하는 문제점을 해결하였고, 또한 유한차분법의 단점인 지형변화의 적용성을 보완할 수 있었다. 자유수면과 동수압을 고려하기 위하여 계산단계를 3단계(정수압 계산단계, 동수압 보정단계, 자유수면 보정단계)로 나누어 해석하였고, 개발된 수치모형을 이용하여 실험값이 존재하는 수중방파제를 지나는 비선형파의 전파문제에 대해 수치모의를 실시하였다. 전반적으로 수치모의에 의한 결과는 실험값과 일치하는 경향을 나타내었다.

• Journal of Korea Water Resources Association
• /
• v.38 no.5 s.154
• /
• pp.355-364
• /
• 2005

In this study, flood inundations have been simulated by using the numerical model FLUMEN solving the shallow-water equations with a finite volume method. Before applying to a real problem, the numerical model is first applied to simplified problems. Obtained numerical results are verified by comparing with available analytical solutions and laboratory measurements. Reasonable agreements are observed. The model is then applied to a simulation of flood events with real geometries. The results of this study will provide basic information to make a flood inundation map.